Show us your Kegerator - Page 110

bdnoona · 08-05-2009, 05:40 PM

I don't know if I ever posted mine in here. If so, it probably only had three taps then. Here it is (sorry crappy phone pic):

boogyman · 08-05-2009, 10:38 PM

awesome handles. custom or bought?

**DeathBrewer** · 08-05-2009, 10:42 PM

Quote:

Originally Posted by hal2814

Here she is. I'm set up right now for two kegs with some shelf space but with the bottom in and shelves out, I can fit 4 kegs or two kegs and two carboys. And I don't think you can see it in the pics but my drip try is a cookie sheet at the bottom of the fridge

Hey...nice fridge, hombre

RockfordWhite · 08-05-2009, 11:23 PM

So wait...do you have bud dry on tap?

Recusit8m · 08-05-2009, 11:27 PM

Heres mine...Awaiting til the AM to put in my shanks/faucets/handles

**HBHoss** · 08-05-2009, 11:51 PM

Although I posted my Keezer already, I actually built my Kegerator a few months before it. Realized I never posted the pics. Here it is.

I started out with a Oster 5005 which has been displayed in this thread enough to not warrant pictures. I'll just show my modifications.

Took the top off and drilled the hole to accept the toilet flange (black abs pipe).

Then lined it up to finish drilling through the top insulation.

I then took 3" black abs pipe and 2 pieces of tubing of a larger diameter than the actual liquid line. I then filled the abs with spray insulation.

I then ran the liquid lines up through the sleeves and attached them to the taps.

I then fed the lines down into the Kegerator and pressure fit the pipe into the flange and put a cap on it. I sanded down the edge of the cap so it would blend better

**HBHoss** · 08-05-2009, 11:54 PM

Then I hooked up the taps and kegs etc.. and there it is. One of these days I may spruce it up with railing and a drip tray but for now it works great.

bdnoona · 08-06-2009, 05:44 PM

Quote:

Originally Posted by boogyman

awesome handles. custom or bought?

Bought. They are Sierra Nevada tap handles which I got off EBay for ~$10/ea. I print the label out, cut them to fit the shield, and then paste them on with a glue stick. Cheap and easy, but still looks pretty nice IMO.

Brian

**arturo7** · 08-06-2009, 05:57 PM

Quote:

Originally Posted by Recusit8m

Heres mine...Awaiting til the AM to put in my shanks/faucets/handles

Damn, that thing is tiny. Where did you find regulators that small?

Rick500 · 08-06-2009, 06:28 PM