 |
|
10-12-2005, 06:26 AM
|
#1
|
|
Senior Member
Join Date: Aug 2005
Location: Hurst, Tx
Posts: 654
|
secondary regulator
|
|
My fridge in the garrage will hold 2 kegs plus a co2 tank. The only problem, I want to keep 2 kegs with different carbonation levels going at the same time.
The regulator off of my tank will be set to the higher pressure and split to run to the keg with higher carbonation and the other split will need to be regulated down for the one with lower carbonation.
Secondary co2 regulators cost dang near as much as a primary regulator. Is there any reason why a plain old compressed air regulator wouldn't work?
Something allong the lines of this: http://www.brandsonsale.com/rid-30225.html
__________________
Scott
Primary: Empty
Secondary #2: Empty
Bottle Conditioning: Oatmeal Stout
Drinking from Keg: Ordinary Bitter, Kolsch
Drinking bottled: Brown Autumn Wee Heavy
Hefe Weizen
Peaches and Cream Weizen
"This is grain, which any fool can eat, but for which the Lord intended a more divine means of consumption... Beer!"
-Robin Hood, Prince of Thieves, Friar Tuck.
Next up: Hefe Weizen
|
|
|
10-12-2005, 04:58 PM
|
#2
|
|
Senior Member
Join Date: Aug 2005
Location: Little Rock, AR
Posts: 338
|
first problem is: That reg. is not adjustable, i.e. it doesn't control the amount of psi coming out, it only monitors the PSI passing thru it. You want to take the psi down from around 550 psi to 10 or 12 psi.
|
|
|
10-13-2005, 07:48 AM
|
#3
|
|
Senior Member
Join Date: Aug 2005
Location: Hurst, Tx
Posts: 654
|
Quote:
|
Originally Posted by cowain
first problem is: That reg. is not adjustable, i.e. it doesn't control the amount of psi coming out, it only monitors the PSI passing thru it. You want to take the psi down from around 550 psi to 10 or 12 psi.
|
Wha? What's that little adjustment knob for? I want to take the pressure from 25 or 30 down to about 6-8 . I know that the guage is not accurate enough for that kind of adjustment but I'll put a 0-30 guage on a T between it and the keg. That will tell me exactly how much pressure I've got on the keg.
What about something like this?
http://cgi.ebay.com/HEAVY-DUTY-AIR-REGULATOR-WITH-GAUGE-145-PSI-1-4-NPT_W0QQitemZ4410755223QQcategoryZ22779QQrdZ1QQcmd ZViewItem
__________________
Scott
Primary: Empty
Secondary #2: Empty
Bottle Conditioning: Oatmeal Stout
Drinking from Keg: Ordinary Bitter, Kolsch
Drinking bottled: Brown Autumn Wee Heavy
Hefe Weizen
Peaches and Cream Weizen
"This is grain, which any fool can eat, but for which the Lord intended a more divine means of consumption... Beer!"
-Robin Hood, Prince of Thieves, Friar Tuck.
Next up: Hefe Weizen
|
|
|
10-13-2005, 02:36 PM
|
#4
|
|
Senior Member
Join Date: Aug 2005
Location: Little Rock, AR
Posts: 338
|
my biggest concern would still be that I'm not sure if that gauge is just used for monitoring instead of monitoring and regulating. I'd send the seller an email to be sure.
Also, just to be sure on your plan, you're putting this guy after your primary regulator has taken the pressure down from the CO2 tank right?
If it's adjustable, it could probably work.
|
|
|
10-13-2005, 03:43 PM
|
#5
|
|
Senior Member
Join Date: Aug 2005
Posts: 1,372
|
Quote:
|
Originally Posted by cowain
first problem is: That reg. is not adjustable, i.e. it doesn't control the amount of psi coming out, it only monitors the PSI passing thru it. You want to take the psi down from around 550 psi to 10 or 12 psi.
|
This sounds like an oxymoron. Just kidding! The second hyperlink appears to be a true regulator but the concern about the pressure would be an area of concern. Attempting to use it to step down the pressure directly out of the tank is probably pushing it past its limitations as it was desinged for compressed air which is only a fraction of the pressure. However, I don't see why it would not work as a secondary.
Last edited by PT Ray; 10-13-2005 at 03:51 PM.
|
|
|
10-13-2005, 08:27 PM
|
#6
|
|
Senior Member
Join Date: Aug 2005
Location: Hurst, Tx
Posts: 654
|
Quote:
|
Originally Posted by ScottT
The regulator off of my tank will be set to the higher pressure and split to run to the keg with higher carbonation and the other split will need to be regulated down for the one with lower carbonation.
[/url]
|
Yes, the pressure that I want to step down will only be at 30 pounds max.
Heck, these air regulators are rated to 120 pounds or better.
I'll be using another guage between it and the keg to monitor pressure. I'm just questioning if it's adjustable enough.
__________________
Scott
Primary: Empty
Secondary #2: Empty
Bottle Conditioning: Oatmeal Stout
Drinking from Keg: Ordinary Bitter, Kolsch
Drinking bottled: Brown Autumn Wee Heavy
Hefe Weizen
Peaches and Cream Weizen
"This is grain, which any fool can eat, but for which the Lord intended a more divine means of consumption... Beer!"
-Robin Hood, Prince of Thieves, Friar Tuck.
Next up: Hefe Weizen
|
|
|
10-14-2005, 02:05 AM
|
#7
|
|
Senior Member
Join Date: Aug 2005
Posts: 1,372
|
I got to thinking about the mini regulator. This is the samething connected on sprayguns to fine tune the pressure before it enters the gun. In which case it should do the job. I think it would be safe to say that you could adjust your pressure from 0 up to the supply pressure.
Last edited by PT Ray; 10-14-2005 at 02:10 AM.
|
|
|
10-14-2005, 02:17 AM
|
#8
|
|
Senior Member
Join Date: Aug 2005
Location: Hurst, Tx
Posts: 654
|
That's what I'm thinking. They're not needle valve flow controllers, they're mini regulators. I can get them for around $10 bucks or so and get a $8 0-30 guage and hook it all up to accomplish the same thing as another $40 regulator.
I'm going to give it a go.
__________________
Scott
Primary: Empty
Secondary #2: Empty
Bottle Conditioning: Oatmeal Stout
Drinking from Keg: Ordinary Bitter, Kolsch
Drinking bottled: Brown Autumn Wee Heavy
Hefe Weizen
Peaches and Cream Weizen
"This is grain, which any fool can eat, but for which the Lord intended a more divine means of consumption... Beer!"
-Robin Hood, Prince of Thieves, Friar Tuck.
Next up: Hefe Weizen
|
|
|
04-01-2007, 03:46 PM
|
#9
|
|
Senior Member
Join Date: Dec 2005
Location: Madison, WI
Posts: 567
|
Hate to dig up an old dead thread, but did anyone ever actually try this. It seems like a relatively cheap easy way to do mulitple pressures.
|
|
|
04-01-2007, 05:20 PM
|
#10
|
|
Cranky Old Guy
Join Date: Oct 2005
Location: Willamina & Oak Grove, Oregon, USA
Posts: 24,799
|
http://www.sciplus.com/singleItem.cfm?terms=12095&cartLogFrom=Search
The description is messed up. This is actually a Milwaukee secondary regulator, not a splitter.
On sale for 5.95, you'll need some fittings and a guage.
__________________
Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"
|
|
|
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
|
|