Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Bottling/Kegging (http://www.homebrewtalk.com/f35/)
-   -   Sanyo 4912 conversion ?? (http://www.homebrewtalk.com/f35/sanyo-4912-conversion-48866/)

GIusedtoBe 12-22-2007 04:12 PM

Sanyo 4912 conversion ??
 
I know this info is out there but i was wondering, do you guys who have done this just cut your tower hole dead center or did you do the cornstarch trick to locate the lines first?

Thanks,
Al

ohiobrewtus 12-23-2007 01:15 AM

I didn't even bother with the cornstarch trick. I just drilled dead center and had no problems at all.

c.n.budz 12-23-2007 01:19 AM

If you drill right through the top there's nothing but insulation

BlindLemonLars 12-23-2007 02:22 AM

I went dead-center too, with no problems. My dad had borrowed my set of hole-saws, so I used an electric scroll saw to cut the circle. Worked fine.

tbulger 12-23-2007 03:14 AM

If you leave the door open for a few minutes and touch the top you can feel where the line is it gets pretty hot quickly and you know exactly where it is.

Buford 12-23-2007 03:20 AM

I did the cornstarch thing to be sure - dead center is fine. I cut a 2 3/4" hole.

TheJadedDog 12-23-2007 03:25 AM

I went dead center without the cornstarch and had no problems.

Bulls Beers 12-23-2007 03:41 AM

I'll be cutting my sanyo on Tuesday..Thanks for the tip.


All times are GMT. The time now is 07:44 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.