Spike Brewing 12.5 Conical Fermenter Giveaway - Enter Now!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Replacing beer line and Oetiker clamps

Reply
 
LinkBack Thread Tools
Old 07-12-2011, 11:43 PM   #1
devils4ever
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2007
Location: NJ, USA
Posts: 216
Liked 5 Times on 5 Posts

Default Replacing beer line and Oetiker clamps

I want to replace the beer lines going to my picnic taps from the kegs. This is one area that I don't feel gets cleaned like the rest of the keg setup.

So, I ordered 3/16" tubing and Oetiker clamps. How hard is it to get those clamps off and put new ones on?

I have a blunt nail puller that looks exactly like the "official" tool. Therefore, I plan on using this rather than spend the extra $$$. Do I cut the old clamp off? And then, just squeeze a new one on?

Thanks.

__________________

"Hush little brewski don't you leak, daddy wants to drink for at least a week." -- Bender of Futurama

"Actually, Dwight, you're right. Alcohol is very very bad...for children. But once you turn 21, it becomes very very good! So scram!" -- Leela

devils4ever is offline
 
Reply With Quote Quick reply to this message
Old 07-12-2011, 11:57 PM   #2
Flomaster
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: Orange, Ca
Posts: 2,138
Liked 31 Times on 29 Posts
Likes Given: 37

Default

you can use plier or what ever you want to get the claps off a small flat head screwdriver I have used, I have used tiny side cutting pliers. etc just kinda depends on how much room you have.

as far as the "tool" your blunt nail puller might work just fine I bought some pliers from harbor freight to use.


-=Jason=-

Flomaster is offline
 
Reply With Quote Quick reply to this message
Old 07-13-2011, 01:07 AM   #3
marzsit
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2009
Location: kent, wa.
Posts: 315
Liked 5 Times on 5 Posts

Default

i bought an official oetiker plier made by knipex off ebay, brand new, for $7.99 including shipping. not a bad deal if you work with them often (i do..)

__________________
marzsit is offline
 
Reply With Quote Quick reply to this message
Old 07-13-2011, 01:18 AM   #4
P-J
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Charlotte, NC
Posts: 3,246
Liked 248 Times on 200 Posts
Likes Given: 436

Default

Here you go:

__________________
P-J is offline
 
Reply With Quote Quick reply to this message
Old 07-13-2011, 02:03 AM   #5
LizardBrew83
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2010
Location: New Haven, CT
Posts: 63
Default

I find that twisting a little helps... going the same direction that the little side "hooks" are open.

__________________
"Thank you, homebrewing, for making my alcoholism seem like a neat hobby"
LizardBrew83 is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
3/16 inch beer line, 1/4 inch tailpiece, #145 Oetiker = leak billtzk Bottling/Kegging 16 10-24-2010 04:16 AM
Why you should use hose clamps on your beer lines bolts Bottling/Kegging 5 08-29-2010 10:18 PM
Need inexpensive source for Oetiker clamps & pliers set LouT Bottling/Kegging 17 08-18-2009 04:48 PM
Using 1/4" braided line for beer line - ok? bmckee56 Bottling/Kegging 12 02-22-2009 06:40 AM
Removing ear clamps from beer lines hughes_brews Bottling/Kegging 7 04-13-2008 04:36 PM