Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Bottling/Kegging (http://www.homebrewtalk.com/f35/)
-   -   Repair Keg Rubber (http://www.homebrewtalk.com/f35/repair-keg-rubber-153339/)

GroovePuppy 12-23-2009 08:25 PM

Repair Keg Rubber
 
I searched (honest, would I lie :D) and can't find any help. One of my kegs has the rubber loose on one side at the top. What's the best way to glue this back on so that I can lift 5G of beer without it coming loose?

hamiltont 12-23-2009 08:31 PM

Amazing GOOP. Clean the rubber & keg real good. Wipe everything off with lacquer thinner or rubbing alcohol and use a popsicle stick to work the GOOP in. Place it on it's top and put some weight on it. For the sides use a rope wrapped around it and a ~2' 2x2 or something to twist the rope up like a tourniquet so the rubber is tight to the keg. Wipe off the excess GOOP & let it sit for a week.

samc 12-23-2009 08:42 PM

Any two part epoxy from Hdwe store or JB Weld will work.

lamarguy 12-23-2009 09:16 PM

I've repaired two loose rubber handles with polyurethane construction adhesive. It's inexpensive ($4), widely available, waterproof, and does not let go once bonded.

http://ecx.images-amazon.com/images/...500_AA280_.jpg

GroovePuppy 12-23-2009 09:40 PM

Thanks for the tips guys. Hardware store on the way home tonight. :D

GroovePuppy 01-08-2010 03:11 PM

Update: 2 part epoxy did the trick. Thanks again guys!


All times are GMT. The time now is 03:51 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.