Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Bottling/Kegging (http://www.homebrewtalk.com/f35/)
-   -   Regulator Setting (http://www.homebrewtalk.com/f35/regulator-setting-198624/)

billk911 10-01-2010 07:37 PM

Regulator Setting
 
I just set up my first tap beer system and i need a little help in setting the regulator. Forst of all it is a scottish heave ale. My regulator gauge has a PSI setting on the inside arc and a "bar" setting on the outer arc. I believe I set it to the red outer numbers but not sure what to set it at. Thanks for any help I can get.

Bowtiebrewery 10-01-2010 08:14 PM

If your lines are the appropriate length you should set that regulator to 12psi and be done with it... Should be just fine for that beer... you could even go a little less say 10psi for that style.

ZWood15 10-01-2010 08:46 PM

Figure out the reccomended carb level for that style of beer (1.5-2.3 vols) and adjust the regulator according to this: http://www.kegerators.com/carbonation-table.php

Forget about it for a week or two to let it carb up and enjoy!


All times are GMT. The time now is 07:18 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.