Spike Brewing 12.5 Conical Fermenter Giveaway!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Is this regulator salvageable?

Reply
 
LinkBack Thread Tools
Old 03-14-2009, 02:28 PM   #1
Pickngrin
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: Worcester, MA
Posts: 740
Liked 3 Times on 3 Posts

Default Is this regulator salvageable?

I've had this dual gauge regulator sitting among my junk-parts-that-I-will-one-day-put-to-good-use pile for years. The high-side pressure gauge is damaged (the plastic cover is missing and the needle is screwy). I was going to remove that gauge and replace it with a new one. Well, it was really difficult to remove (still don't have it all the way off), and in trying to remove the hose barb, the barb actually cracked(!). Here is a view of the remaining portion of the barb.
Is there a way I can get this piece out? Or is this beyond salvageable at this point?
Thanks

__________________
Pickngrin is offline
 
Reply With Quote Quick reply to this message
Old 03-14-2009, 08:34 PM   #2
bad coffee
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
bad coffee's Avatar
Recipes 
 
Join Date: Jun 2008
Location: NYC
Posts: 4,332
Liked 422 Times on 419 Posts
Likes Given: 47

Default

You could try a screw extractor, but I bet those threads are left handed, which is probably why you snapped the gauge.

You could also very gently drill it out until there's about 1/32" of material left, and unscrew it.

B

__________________
Quote:
Originally Posted by GilaMinumBeer
Why do you think they choose that path? (.)(.) = $$$$$$$$$
Quote:
Originally Posted by Zuljin View Post
Wtf was chasing you for an hour? Buy a gun already.
Quote:
Originally Posted by AZ_IPA View Post
I'm a meat hunter. PKU.
bad coffee is offline
 
Reply With Quote Quick reply to this message
Old 03-15-2009, 04:38 AM   #3
jpc
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Santa Clara, CA
Posts: 1,906
Liked 60 Times on 45 Posts

Default

Quote:
Originally Posted by bad coffee View Post
You could try a screw extractor, but I bet those threads are left handed, which is probably why you snapped the gauge.

You could also very gently drill it out until there's about 1/32" of material left, and unscrew it.

B
If they are left-handed threads, just use any ordinary tapered-thread bolt that fits inside as an extractor.
__________________
jpc is offline
 
Reply With Quote Quick reply to this message
Old 03-15-2009, 04:57 AM   #4
samc
Feedback Score: 1 reviews
Recipes 
 
Join Date: Aug 2008
Location: Portland OR
Posts: 5,420
Liked 54 Times on 51 Posts
Likes Given: 29

Default

Having inhaled a more than needed amount of CO2 recently I would trash it and buy a new one. It's is one of the parts of the brewery/serving area that I want to function 100% of the time for my piece of mind.

__________________
samc is offline
 
Reply With Quote Quick reply to this message
Old 03-16-2009, 05:00 AM   #5
boogyman
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Folsom, CA
Posts: 409
Liked 1 Times on 1 Posts

Default

i would try to drill that out. if you go too far, you can re-tap it as well.

__________________
boogyman is offline
 
Reply With Quote Quick reply to this message
Old 03-16-2009, 12:06 PM   #6
Pickngrin
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: Worcester, MA
Posts: 740
Liked 3 Times on 3 Posts

Default

Thanks for the input. I just drilled the center part out, leaving some around the circumference into the threads. How do I get that part out?
Also, any suggestions for successfully removing the damaged gauge? I had put it in my workbench vise and tried turning the body of the regulator... it's not budging. It does indeed say left-handed thread on the back. Any tricks to this?

__________________

Last edited by Pickngrin; 03-16-2009 at 10:00 PM.
Pickngrin is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Is this batch salvageable? toddmuchmore Beginners Beer Brewing Forum 10 02-10-2014 04:21 AM
IPA gone wrong-- I think it's got mold. Salvageable? AndyC Beginners Beer Brewing Forum 98 04-24-2009 03:27 PM
3+ year old Kit... salvageable? DeadDoc Extract Brewing 12 01-30-2009 02:47 PM
Rusted burner. Is it salvageable? Zymurgrafi Equipment/Sanitation 10 10-13-2008 05:25 PM
is this salvageable? finnbee Beginners Beer Brewing Forum 9 02-28-2008 04:27 AM