Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > questions about kegs and kegging
Reply
 
LinkBack Thread Tools
Old 07-17-2008, 02:10 PM   #1
THEDIETZ
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2008
Location: Harrisburg, PA
Posts: 196
Default questions about kegs and kegging

first question. i just bought 5 used ball lock kegs. when just doing a general cleaning (i will sterilize them right before the kegging) i put some water in them and shook them around. I noticed with about 2 of them that water was coming out of the top piece that you take off. the O ring looks good though. And i know I had to leave a lot of pressure out of the one first, and it was one that leaked! so when i keg these and get carbonation introduced would that then force the O ring to make a proper seal? I am just not sure if i should worry that they didn't seal completely when i had water in them.

next question. i just bought 5 of these. my kegerator holds 2 at a time. if i get some brew in the other 3 and force carbonize them could i place in hte closet in the basement (which it is cool but def not like a fridge). Just wondering if I can keep them there so when i need a new keg on tap, or will they go bad?

__________________
THEDIETZ is offline
 
Reply With Quote Quick reply to this message
Old 07-17-2008, 02:16 PM   #2
HomerT
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2005
Location: Wixom, MI
Posts: 558
Liked 4 Times on 3 Posts

Default

You need to hit it with about 15~20psi for a moment to seat the lid properly. Then do your lea check. The lids on cornies need pressure to properly seal, as the lid lock isn't enough.

As for storage of the others, it seems that the most common recomendation is to use gas to carbonate at serving temps. Since you can't do that in a closet, most would recomend priming and naturally carbing like you would a bottle. You will get a little more settlment in the keg, but it should pour out by the thrid pint.



-Todd

__________________
HomerT is offline
 
Reply With Quote Quick reply to this message
Old 07-17-2008, 02:24 PM   #3
DonkeyShoes
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2008
Location: Salisbury, MD
Posts: 120
Default

I got my first corny about two weeks ago and the same thing happened when I rinsed mine for the first time. I used ~30 psi to seal it up...for the first couple of seconds I heard gas leaking out the top but after that you could watch the lid rise up as it sealed.

It did take several tries to get everything put together properly and sealed. I practiced with water first since I didn't want to risk any beer.

__________________
DonkeyShoes is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Kegging my beer in Sanke Kegs wheeble General Beer Discussion 7 11-06-2009 05:11 PM
Kegging in Quarter/Half kegs? Big Stosh Bottling/Kegging 14 03-30-2009 06:37 PM
Kegging - Different PSI on different kegs... Lots of Qs RoaringBrewer Bottling/Kegging 9 10-26-2007 07:30 PM
Kegging with Soda Corny Kegs... cyclonebrew Bottling/Kegging 3 02-21-2007 05:46 PM
Kegging into Mini-Kegs Jester4176 Bottling/Kegging 10 02-23-2006 06:01 AM



Newest Threads

LATEST SPONSOR DEALS