Come enter the BrewHardware Giveaway!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Noob regulator Questins???
LinkBack Thread Tools
Old 03-13-2008, 06:46 AM   #1
Feedback Score: 0 reviews
Join Date: Mar 2007
Location: Dav. IA
Posts: 188
Liked 1 Times on 1 Posts

Default Noob regulator Questins???

I just got my keg kit and have some regulator questions. One is when I went to pressurize my empty kegs to check for leaks I slowly tried to raise the pressure to 30psi. While I was doing this, the regulator started sputtering and the needle on the gauge started jumping all over the place. Then the overpressure thing went off and scared a few drops out me. So I tried it again after bleeding off the pressure, this time slooowly raising the pressure, and sure enough the same thing happened. So I filled the keg with sanitizer and did it again but this time everything was fine. Then I disconnected the pressure at the keg and turned off the gas on the tank and the needle on the regulator maxed out and stayed there till I bled the pressure off a few times. Does the regulator have problems or is this operator error???

Second question is, after I racked my first beer into the keg at room temperature I placed the keg and Co2 tank in the kegerator and turned on the gas. I checked it the next day and the high pressure gauge that read 1200psi at room temp now reads ~600psi. I figured it was a leak so I rechecked the keg and tightened everything up and the gauge stayed, so I figured problem solved. Then just the other day I took the tank out of the fridge and set it back out at room temp overnight and what do ya know, it rose back to 1200psi???? Is that normal??

The first question is really bugging me. But it is dispensing beer now so I can RDWHAHB.

MashStirBrew is offline
Reply With Quote Quick reply to this message
Old 03-13-2008, 11:37 PM   #2
Feedback Score: 0 reviews
malkore's Avatar
Join Date: Jun 2007
Location: Nebraska
Posts: 6,922
Liked 34 Times on 32 Posts
Likes Given: 9


1. not normal. make sure your regulator valve is CLOSED (not allowing gas out) when you open the valve on the cylinder. failure to do this can damage the regulator. Also make sure you have the nylon washer installed.

2. normal. search the forums...gas pressure is directly related to temperature. as temp decreases, pressure decreases. at 70F, CO2 should be at 900psi. at 40F in the kegerator, it should be more like 450-500psi.

Primary: English Mild
On tap: Pale Ale, Lancelot's Wheat, English Brown Ale, Steam Beer, HoovNuts IPA
Bottled: MOAM, Braggot, Raspberry Melomel, Merlot, Apfelwein, Pyment, Sweet mead, Cabernet
Gal in 2009: 27, Gal in 2010: 34, Gal in 2011: 13, Gal in 2012: 10
malkore is offline
Reply With Quote Quick reply to this message

Quick Reply
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
is co2 regulator the same as a beergas regulator? bkov Bottling/Kegging 4 04-15-2009 04:32 AM
Very Noob fermentation?? for Noob AG'r GIusedtoBe All Grain & Partial Mash Brewing 3 09-09-2008 08:11 PM
Regulator Help reidoreilly Bottling/Kegging 6 07-30-2008 06:47 PM
regulator... debtman7 Bottling/Kegging 7 10-13-2006 04:24 PM
not so noob, noob question loopmd Extract Brewing 11 12-07-2005 06:03 PM

Newest Threads