Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Newbie kegger lesson learned about sealing corny lids

Reply
 
LinkBack Thread Tools
Old 08-17-2012, 06:28 PM   #1
Helly
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Helly's Avatar
Recipes 
 
Join Date: Dec 2011
Location: Ravenna, Mi
Posts: 229
Liked 15 Times on 15 Posts
Likes Given: 1

Default Newbie kegger lesson learned about sealing corny lids

I'm sure this has been addressed before but I couldn't read every single thread in this forum so here goes. I kegged my first two batches recently after obtaining a couple pretty nice looking ball-lock corny kegs. I did my reading, both here and elsewhere (the sticky about kegging is a great thread, thanks!) but there was one seemingly very simple area that was either missed or I didn't digest very well - sealing the lid of the keg. I didn't seal the first one right, hooked up the CO2, left to go to a ballgame and came back the next day to an empty CO2 tank and flat beer. A very simple fix - don't flip the handle on the lid before forcing the lid closed with CO2 - but I learned it the hard way. This youtube video (only about 1:30 long) demonstrates it very well, in my opinion.

http://youtu.be/eNNIgBX9Wvk
So if this note saves someone else a headache and an unnecessary $13 CO2 refill, it was worth my time. Thanks to all who contribute, I've learned a ton already.

__________________
Helly is offline
collinsDPT Likes This 
Reply With Quote Quick reply to this message
Old 08-17-2012, 07:06 PM   #2
terrapinj
HBT_SUPPORTER.png
Feedback Score: 1 reviews
Recipes 
 
Join Date: Dec 2010
Location: Santa Monica, CA
Posts: 2,412
Liked 167 Times on 124 Posts
Likes Given: 533

Default

these lid o-rings from williams brewing seal much better than the standard ones that come with most cornies

http://www.williamsbrewing.com/KEG-L...-RING-P58.aspx

i still seal the lid with 30psi out of force of habit but it isn't necessary with these

__________________
terrapinj is online now
 
Reply With Quote Quick reply to this message
Old 08-17-2012, 07:47 PM   #3
Yooper
Ale's What Cures You!
HBT_ADMIN.png
Feedback Score: 0 reviews
 
Yooper's Avatar
Recipes 
 
Join Date: Jun 2006
Location: Upper Michigan
Posts: 60,364
Liked 4282 Times on 3120 Posts
Likes Given: 829

Default

A quick check for every one of my kegs is to pressurize, and then use a spray bottle of starsan to check for bubbles around the lid and posts to make sure it's not leaking. I just keep the spray bottle right at the kegerator so I never forget to check for leaks.

__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006
Yooper is offline
 
Reply With Quote Quick reply to this message
Old 08-17-2012, 08:45 PM   #4
Helly
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Helly's Avatar
Recipes 
 
Join Date: Dec 2011
Location: Ravenna, Mi
Posts: 229
Liked 15 Times on 15 Posts
Likes Given: 1

Default

Thanks to both of you for the tips. I will check out those seals and I learned to keep that spray bottle right by the fridge but it's a great reminder. I definitely rushed through this the first time but there's no better way to learn than to do it

__________________
Helly is offline
 
Reply With Quote Quick reply to this message
Old 08-17-2012, 08:47 PM   #5
HawksBrewer
Audible Brewing
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
HawksBrewer's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Chicago, IL
Posts: 3,509
Liked 1027 Times on 968 Posts
Likes Given: 48

Default

Another tip is to seat the lid at 30 psi before purge and repeat process.

__________________
HawksBrewer is offline
 
Reply With Quote Quick reply to this message
Old 08-18-2012, 01:53 AM   #6
isurf
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Galveston Texas
Posts: 176
Liked 11 Times on 10 Posts
Likes Given: 2

Default

Quote:
Originally Posted by Yooper View Post
A quick check for every one of my kegs is to pressurize, and then use a spray bottle of starsan to check for bubbles around the lid and posts to make sure it's not leaking. I just keep the spray bottle right at the kegerator so I never forget to check for leaks.
+1 fool proof!
__________________
isurf is offline
 
Reply With Quote Quick reply to this message
Old 08-20-2012, 02:45 AM   #7
Ryush806
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Ryush806's Avatar
Recipes 
 
Join Date: Sep 2010
Location: Shreveport, Louisiana
Posts: 773
Liked 87 Times on 62 Posts
Likes Given: 21

Default

As someone who is about to keg for the first time next week I'm glad I found this thread! I'd probably be ok the first few times by dumb luck alone and then be really confused when I did finally screw it up.

__________________

Beer is proof that God loves us and wants us to be happy.
- Benjamin Franklin (and I don't care if this quote has been largely discredited/misquoted...I like it!)

Beer, if drank with moderation, softens the temper, cheers the spirit and promotes health.
- Thomas Jefferson

Ryush806 is offline
 
Reply With Quote Quick reply to this message
Old 08-20-2012, 08:30 PM   #8
SpeedYellow
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2007
Posts: 1,063
Liked 103 Times on 86 Posts
Likes Given: 22

Default

This process seems rather unnecessary to me. I've been kegging for years and never had a problem simply wiggling the lid around until it feels like a good fit, then locking it down. Never had a leak. I'm not sure this pressurization process would necessary prevent a leak either.

The spray bottle is probably the best way, and I might start doing that. Or not.

__________________
SpeedYellow is offline
 
Reply With Quote Quick reply to this message
Old 08-20-2012, 08:33 PM   #9
HawksBrewer
Audible Brewing
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
HawksBrewer's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Chicago, IL
Posts: 3,509
Liked 1027 Times on 968 Posts
Likes Given: 48

Default

Quote:
Originally Posted by SpeedYellow View Post
This process seems rather unnecessary to me. I've been kegging for years and never had a problem simply wiggling the lid around until it feels like a good fit, then locking it down. Never had a leak. I'm not sure this pressurization process would necessary prevent a leak either.

The spray bottle is probably the best way, and I might start doing that. Or not.
The spray bottle won't help you if you don't have pressure in the keg.
__________________
HawksBrewer is offline
 
Reply With Quote Quick reply to this message
Old 08-20-2012, 08:42 PM   #10
terrapinj
HBT_SUPPORTER.png
Feedback Score: 1 reviews
Recipes 
 
Join Date: Dec 2010
Location: Santa Monica, CA
Posts: 2,412
Liked 167 Times on 124 Posts
Likes Given: 533

Default

Quote:
Originally Posted by SpeedYellow View Post
This process seems rather unnecessary to me. I've been kegging for years and never had a problem simply wiggling the lid around until it feels like a good fit, then locking it down. Never had a leak. I'm not sure this pressurization process would necessary prevent a leak either.

The spray bottle is probably the best way, and I might start doing that. Or not.
spray bottle is only good is IDing a leak, not in fixing/preventing one

one of my cornies has a slightly deformed opening and won't seal unless hit with 20-30psi - if i bleed off too much pressure it will unseal itself again
__________________
terrapinj is online now
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Lesson Learned... phrogpilot73 Bottling/Kegging 1 04-23-2011 02:42 PM
The importance of hose clamps - lesson learned dna_alexov Bottling/Kegging 0 03-01-2009 03:41 PM
CO2 and the lesson learned with trade in. Ego Archive Bottling/Kegging 3 02-10-2009 12:42 AM
Important lesson learned today Wahoo Wheat Bottling/Kegging 1 04-26-2008 09:16 PM
Learned an important lesson today. Cheesefood Bottling/Kegging 11 12-30-2006 02:08 AM