Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > New low in patience
Reply
 
LinkBack Thread Tools
Old 03-24-2013, 02:30 AM   #1
phrinda
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Manhattan, Kansas
Posts: 24
Liked 1 Times on 1 Posts
Likes Given: 1

Default New low in patience

I just received my kegerator kit in the mail today. I have been looking forward to kegging for some time now and it is finally here. Well, sort of. Turns out that co2 isn't easy to get around here so i have to wait and drive a bit. In light of that, when i was racking i hit a new low for my personal patience. I racked one liter of my IPA into a soda stream bottle and carbed it up. Now it's in the fridge chilling. I guess i was just wondering if anyone else has done anything like that.

__________________
phrinda is offline
 
Reply With Quote Quick reply to this message
Old 03-25-2013, 01:34 AM   #2
BonzoAPD
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Location: Congers, NY
Posts: 358
Liked 6 Times on 6 Posts
Likes Given: 7

Default

Quote:
Originally Posted by phrinda
I just received my kegerator kit in the mail today. I have been looking forward to kegging for some time now and it is finally here. Well, sort of. Turns out that co2 isn't easy to get around here so i have to wait and drive a bit. In light of that, when i was racking i hit a new low for my personal patience. I racked one liter of my IPA into a soda stream bottle and carbed it up. Now it's in the fridge chilling. I guess i was just wondering if anyone else has done anything like that.
Nice! How did it turn out?
__________________
BonzoAPD is offline
 
Reply With Quote Quick reply to this message
Old 03-25-2013, 01:53 AM   #3
blazie151
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Location: Ft Lauderdale, FL
Posts: 13
Liked 1 Times on 1 Posts

Default

Replace your soda stream with a carbonator cap now that you have a CO2 tank and you'll save a ton in CO2 costs (those soda streams are a rip off). Also, MANY places sell CO2, not just the local homebrew shops. You can get refills from companies that maintenance soda machines, fire extinguishers, and even some sporting good stores (paintball supplies). Basically, if there's a commercial zone near you, there will be somewhere to refill your CO2. If in doubt, ask a restaurant in your area where they get the CO2 for their soda machines from, or who inspects their fire extinguishers. I'm sure it'll be close.

__________________
blazie151 is offline
 
Reply With Quote Quick reply to this message
Old 03-25-2013, 02:50 AM   #4
phrinda
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Manhattan, Kansas
Posts: 24
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Well, the ipa was good. The soda stream was definitely not designed for beer. But even though it didn't carb properly, it was like a good preview. I would be interested in finding a way to use my co2 container for the soda bottles. As for my area, it looks like I've got a welding shop in town, but I haven't been able to talk to them. And when they aren't open it's about 25 miles to the next shop.

__________________
phrinda is offline
 
Reply With Quote Quick reply to this message
Old 03-25-2013, 04:40 AM   #5
blazie151
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Location: Ft Lauderdale, FL
Posts: 13
Liked 1 Times on 1 Posts

Default

A welding shop will almost certainly have CO2 refills available, but make sure you get an aluminum for your swap out; you don't want the possible rusting of a steel tank and the aluminum is lighter as well, but a lot of old salts like steel and swear by it, usually welders. Also, you can carbonate in a 2 liter with a carbonator cap, either soda water for mixing with syrups later or the whole beverage (it's what I do with my brews, too impatient for bottle carbing, and IPAs are better fresh anyway). There's also a fitting available online to convert your soda stream's connection to a CO2 tank. Links below including product and guide...

http://co2doctor.com/freedomoonespec.htm
http://www.geek.com/articles/geek-pi...-tank-2012074/

__________________
blazie151 is offline
 
Reply With Quote Quick reply to this message
Old 03-25-2013, 11:27 AM   #6
phrinda
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Manhattan, Kansas
Posts: 24
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Thanks for the tips. I will check those out.

__________________
phrinda is offline
 
Reply With Quote Quick reply to this message
Old 03-25-2013, 03:53 PM   #7
blazie151
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Location: Ft Lauderdale, FL
Posts: 13
Liked 1 Times on 1 Posts

Default

The last thing to mention about carbonation is that a soda stream can barely carb water properly because it carbs it too fast, at too low of a pressure, and there's no agitation, so it only absorbs a small amount of gas and the rest is forced to erupt out when the pressure is relieved, which is why anything with sugar in it will foam up and create a mess. That's also why anything carbed with a soda stream is intensely carbed for only a few minutes then it goes really flat, really fast. I carb in 2 liter bottles between 20-45 psi depending on what I'm carbing, and agitate it which makes it absorb a lot more gas and stay carbonated for MUCH longer. The soda stream only carbs to 15 psi and you can't shake it, which is why it didn't work on that beer you tried. If you chilled that beer in a 1 or 2 liter bottle topped with a carbonator cap then carbed it to 20-25 psi, shaking it and refilling the gas a few times, it would have been perfect. It's what I do because I'm too impatient to bottle carb.

__________________
blazie151 is offline
 
Reply With Quote Quick reply to this message
Old 03-26-2013, 01:20 AM   #8
phrinda
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Manhattan, Kansas
Posts: 24
Liked 1 Times on 1 Posts
Likes Given: 1

Default

I was noticing that the stuff always went flat quickly. now that I've learned a bit more through carbing a keg, I can see the shortcomings of the ss. Thanks for the info

__________________
phrinda is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
A story of patience...almost. Ill call it "accidental patience". GeorgiaTiger Beginners Beer Brewing Forum 5 02-16-2013 03:29 PM
My patience has run out homebrewdad Beginners Beer Brewing Forum 42 02-18-2012 08:21 PM
Do I have enough patience for this? joey024 Beginners Beer Brewing Forum 4 05-25-2009 05:14 PM
Just a little patience... Mingus Beginners Beer Brewing Forum 3 04-12-2009 02:19 PM
Patience! carnevoodoo General Beer Discussion 5 11-13-2008 03:00 PM