Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > New to kegging. Does this sound right?
Reply
 
LinkBack Thread Tools
Old 12-09-2012, 06:20 PM   #1
slomo
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
slomo's Avatar
Recipes 
 
Join Date: Jan 2009
Location: sacramento, ca.
Posts: 539
Liked 8 Times on 8 Posts
Likes Given: 2

Default New to kegging. Does this sound right?

So I have everything set up and was doing a once over everything before I put the beer in the kegs and start carbing it. I have 5 feet of 3/16 tubing for serving I was going to serve at about 38 to 40 degrees and don't plan on serving beer with carbonation greater then 2.5. Do I need longer serving length? Opinions seemed to very and 5 feet seemed reasonable to me. Also with poor planning on my part I have a Xmas party this coming Saturday and need to force carb the beer. Does anyone have a suggestion on how much gas I should have the beer sit on. I am going to fill the kegs tonight. TIA

__________________

Primary: guinness clone, IIPA
Secondary:
Bottled: RIS
The beatings will continue until morale improves!

slomo is offline
 
Reply With Quote Quick reply to this message
Old 12-09-2012, 06:38 PM   #2
BigB
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Shelby Twp, MI
Posts: 1,760
Liked 41 Times on 36 Posts
Likes Given: 41

Default

Check out Bobby's force carbing thread. http://www.homebrewtalk.com/f35/keg-...strated-73328/ As far as line length... I use 5 feet of 3/16 at 38F and don't have any problems... Some guys do. So you'll probably just have to see how it works. If you haven't cut the serving line length, another poster suggested starting at 10' and cutting back from there until you reach a length that works well for you.

__________________
I love the sound of an airlock bubbling in the morning. It sounds like.....VICTORY.

Quote:
Originally Posted by TxBrew
It's now degenerating into nu uh and uh huhs and it no longer serves a point.
BigB is offline
 
Reply With Quote Quick reply to this message
Old 12-09-2012, 06:44 PM   #3
raouliii
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
raouliii's Avatar
Recipes 
 
Join Date: Aug 2011
Location: Ponchatoula, LA
Posts: 780
Liked 64 Times on 57 Posts
Likes Given: 98

Default

So about 12psi serving pressure? Five feet might work just fine. I would NOT recommend burst carbing by rolling or shaking your keg. The forum is FULL of failed attempts at this and you don't want to be pouring foam all night on Saturday.

I'm certainly not an expert, but something like 30psi, 20 psi, 12 psi with 24-36 hours in between might get you to a decent carb level by Saturday. You'll have to purge some gas from the keg to get accurate readings when dropping the psi.

I serve successfully at 12-14psi with 6', 3/16" lines with one epoxy stirrer in each dip tube.

__________________
On Tap:
NippleRub Ultra
------
Big Breasted Blonde
Rochefort 7

In the Chamber:
Re-a-Ranger IPA

Next Up:
An Amber of some sort
raouliii is offline
 
Reply With Quote Quick reply to this message
Old 12-09-2012, 06:55 PM   #4
slomo
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
slomo's Avatar
Recipes 
 
Join Date: Jan 2009
Location: sacramento, ca.
Posts: 539
Liked 8 Times on 8 Posts
Likes Given: 2

Default

Thanks for the info. I think I should be good. With respect to the purging of the kegs. Should I turn the gas to 12 psi then turn my manifold off, purge the kegs then turn my manifold on to get the 12 psi that I am looking for?

__________________

Primary: guinness clone, IIPA
Secondary:
Bottled: RIS
The beatings will continue until morale improves!

slomo is offline
 
Reply With Quote Quick reply to this message
Old 12-09-2012, 07:07 PM   #5
Yooper
Ale's What Cures You!
HBT_ADMIN.png
Feedback Score: 0 reviews
 
Yooper's Avatar
Recipes 
 
Join Date: Jun 2006
Location: Upper Michigan
Posts: 61,052
Liked 4462 Times on 3248 Posts
Likes Given: 868

Default

Quote:
Originally Posted by slomo View Post
Thanks for the info. I think I should be good. With respect to the purging of the kegs. Should I turn the gas to 12 psi then turn my manifold off, purge the kegs then turn my manifold on to get the 12 psi that I am looking for?
Turn the gas off to the keg, keep it off, and purge the keg. Turn down the regulator, almost all the way, then open the gas. Then adjust the pressure up to 12 psi. Does that make sense? You want to get to 0 in the keg, and on the regulator (or close to it) and then turn it UP, not down, to get where you want to be.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006
Yooper is offline
 
Reply With Quote Quick reply to this message
Old 12-09-2012, 07:21 PM   #6
beerguy52
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Posts: 44
Liked 2 Times on 2 Posts

Default

I force carb from time to time with no probls as long as you let the beer settle prior to serving. Same as with a commercial keg

__________________
beerguy52 is offline
 
Reply With Quote Quick reply to this message
Old 12-09-2012, 07:23 PM   #7
de3isit
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Murrieta, CA
Posts: 256
Liked 15 Times on 14 Posts
Likes Given: 3

Default

I force carb with about 30 PSI and shake the crap out of it for about 10 minutes. Then tun it dowm to 12 PSI for about 2 days at room temperature as it assists in CO2 absorption. I serve at about 8 PSI through 10' lines.

__________________
Monster Brewhouse

Primary:

Secondary:
Pliny the Elder Clone

On Tap:
Hefe
Belgian Golden Strong

My Single Tier Build
Control Panel Upgrade
de3isit is offline
 
Reply With Quote Quick reply to this message
Old 12-09-2012, 07:37 PM   #8
beerguy52
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Posts: 44
Liked 2 Times on 2 Posts

Default

Oops, didn't mean to send that.

You can force carb one day, put the keg in whatever refrigeration environment you use and tap the next day. Naturally you wouldn't open a shaken can or bottle right away but overnight settling will solve the problem.

As for line length, I did all the calculations and came to the conclusion that experimentation works best. The problem with most of the formulae is that they use widely varying guesstimations if the line resistance. I have a three tap system where the beer is chilled in my mini-walkin and is dispensed through faucets mounted on a kitchen wall. Started with five foot lines and had foamy beer at reasonable pressures. Ended up taking ten foot lines and backing down to the length that worked for my set-up which is 8.5 feet (3/16 ID).

__________________
beerguy52 is offline
 
Reply With Quote Quick reply to this message
Old 12-09-2012, 09:09 PM   #9
Toy4Rick
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Oceanside, Ca
Posts: 374
Liked 13 Times on 12 Posts
Likes Given: 1

Default

I quick carb'd my first keg last night and it couldn't have worked more perfectly

Chilled keg to serving temp
Hooked up Co2 to 30 PSI
Layed keg on it's side and gently rocked it for 2 mins
Reduce PSI to 6, puraged excess from keg
First glass to the end of the keg 6 hours later was well, perfect

Oh yeah, I use about 14" of 3/16 line with a picnic tap
Toy4Rick

__________________

If I can't ride it... 1997 Goldwing
If I can't shoot it... PX4 Storm, Browning Buckmark, S&W 357, Ruger 10-22
or drink it... my Homebrew

Why bother

Toy4Rick is offline
 
Reply With Quote Quick reply to this message
Old 12-09-2012, 09:09 PM   #10
JoeSpartaNJ
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: New Jersey
Posts: 355
Liked 19 Times on 15 Posts
Likes Given: 6

Default

My method is to set regulator to 30 psi and let sit at 38 degrees for 3 days. Turn off gas and purge the keg. Turn regulator back at serving pressure, in my case usually 5 to 8 psi, let sit for an additional 2 days. Always spot on and ready. FWIW, i have 5ft lines and Perlick flow control faucets.

__________________
JoeSpartaNJ is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
How does this IPA sound? Robin0782 Recipes/Ingredients 6 05-24-2012 04:09 PM
First Kegging: Sound like a plan? ChrisS68 Bottling/Kegging 5 01-24-2009 02:47 AM
How's this sound for a kegging system? (semi-portable) bsay Bottling/Kegging 2 08-26-2008 04:22 PM
First Kegging - This sound good? cbird01 Bottling/Kegging 6 06-30-2008 06:40 AM
foam shooting out, bubbling sound, co2 "blowing" sound. I'M OUTTA BEER! chainsawbrewing General Beer Discussion 5 07-23-2007 04:17 PM