Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Need Replacement Regulator Gauges (Cheap)
Reply
 
LinkBack Thread Tools
Old 06-02-2008, 03:51 AM   #1
IlliniSox4Life
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2008
Posts: 85
Liked 1 Times on 1 Posts

Default Need Replacement Regulator Gauges (Cheap)

So I just ordered a used regulator on ebay. The guy put up a picture and it looked to be in real good condition. He said it was in great condition. It was in great condition before it was shipped.

To start, it was supposed to be shipped priority, but was shipped parcel post.

The packaging consisted of one of those priority mail large papery envelopes and some packing tape. It wasn't even cardboard. Needless to say, the envelope was almost shredded when it got here, and the gauges got knocked around and are busted up. I bent them back the best I could (so at least the needles weren't lodged up against the face, and were free to move) and I hooked it up to my CO2 tank. One of the gauges flat out doesn't work, and the other isn't accurate. Anyway, I need to get replacement gauges for them (one is a 3000 psi, the other 60 psi). The cheapest I've been able to find is $24 shipped for the pair. The seller tells me that I can apparently buy them for $15 and is willing to refund me $15, but I have yet to find them at that price.


So this was a long way of venting and asking, where can I get inexpensive gauges to replace these?

__________________
IlliniSox4Life is offline
 
Reply With Quote Quick reply to this message
Old 06-02-2008, 04:12 AM   #2
BlindLemonLars
Conqueroo Brew
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
BlindLemonLars's Avatar
Recipes 
 
Join Date: May 2007
Posts: 4,445
Liked 10 Times on 10 Posts
Likes Given: 31

Default

I don't know about $15, but the Beverage Factory has good prices...make sure you get the correct threads. And once you've gotten some satisfaction from the seller, leave that turkey bad feedback!!

http://www.beveragefactory.com/advan...egories_id=141

__________________
BlindLemonLars is offline
 
Reply With Quote Quick reply to this message
Old 06-02-2008, 04:25 AM   #3
Brett0424
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2008
Location: dallas, tx
Posts: 266
Liked 1 Times on 1 Posts

Default

15 plus shipping would be about 24. 24 shipped is a good deal. Of course he'll quote lower, he's paying. I'd bet you he knew they were broken beforehand too, or else he probably wouldn't give you money.

__________________
Brett0424 is offline
 
Reply With Quote Quick reply to this message
Old 06-02-2008, 04:39 AM   #4
IlliniSox4Life
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2008
Posts: 85
Liked 1 Times on 1 Posts

Default

So basically our communication went like this:

I told him what he did wrong, and told him I would either like a refund (including shipping both ways), or would like for him to pay for replacement gauges which I said I had found for about $10 each + shipping.

He had emailed me back telling me that they were $15, and would I be ok with $15.

I responded to him that I would be fine with whatever it cost to replace them, but that I couldn't find them for that price, and to please provide me with links where I could buy them.

At that point I started this thread.

So he just responded saying that if I just search ebay for high pressure and low pressure gauges I could find them. He then provided these links: 2 High Pressure gauges for 7.99 (+7.95) and
low pressure for 14.99 + 7 ship

He then proceeded to refund me $20 without asking if it was OK.

Those links don't really help because 1) I'm not looking for multiple gauges, and 2) They are the wrong PSI. 1000 PSI is not 3000, and 200 is not 60.


Worst case at this point, I'm out $4, but it's still just messed up. i'm gonna look around a bit more and maybe stop at a store locally tomorrow. I still don't get how you could possibly think that it was alright to ship this in what he shipped it in.

__________________
IlliniSox4Life is offline
 
Reply With Quote Quick reply to this message
Old 06-02-2008, 05:34 AM   #5
Fingers
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Fingers's Avatar
Recipes 
 
Join Date: Jan 2007
Location: Lac du Bonnet, Manitoba
Posts: 4,212
Liked 24 Times on 22 Posts

Default

1000 psi should be okay for the high pressure gauge for your tank. CO2 head pressure at room temp is about 800 psi and it decreases as you cool the tank. The 200 psi is a little out of range for your normal carbonated beverage tank. I think you could get a low pressure gauge fairly cheaply from your local welding supply shop.

By the way, what did you pay for the original gauges?

__________________
If you can't fix it with a hammer, you've got an electrical problem.
Fingers is offline
 
Reply With Quote Quick reply to this message
Old 06-02-2008, 10:46 AM   #6
rex
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2008
Location: Newfoundland
Posts: 87
Liked 1 Times on 1 Posts

Default

Kegworks has them also.

http://www.kegworks.com/home.php?cat=801

$6.77 for the 60psi and $10.69 for the 3000psi.

__________________
www.getfirefox.com
rex is offline
 
Reply With Quote Quick reply to this message
Old 06-02-2008, 02:29 PM   #7
conpewter
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
conpewter's Avatar
Recipes 
 
Join Date: Nov 2007
Location: East Dundee, Illinois
Posts: 5,109
Liked 41 Times on 36 Posts
Likes Given: 7

Default

I have not bought these, but it is very tempting

Edit: removed URL, Grainger did not actually have those guages.

I have a couple gauges I need to replace too.

__________________

"People should not be afraid of their governments. Governments should be afraid of their people." - V

Primary: Nothin
Secondary: Shady Lord RIS, Water to Barleywine, Pumpkin wine, burnt mead
Kegged: Crappy infected mild
Bottles: Apfelwein, 999 Barleywine, Oatmeal Stout, Robust Porter, Robust smoked porter, Simcoe Smash


Last edited by conpewter; 06-02-2008 at 06:57 PM.
conpewter is offline
 
Reply With Quote Quick reply to this message
Old 06-02-2008, 03:29 PM   #8
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,019
Liked 980 Times on 654 Posts
Likes Given: 28

Default

You don't want 60psi secondary anyway. The resolution is too low for using in the 8-15psi range that we normally use.

Here's a backmount 0-30 for $13ish shipped.

http://cgi.ebay.com/ASHCROFT-1-4-NPT...2em118Q2el1247

I bought some 0-15psi ones for my secondary bank because I normally use 10-12psi. I actually should change one of them back to 0-30 for my hefes/wits though because i have that needle pegged.

Also, you really don't need a high pressure gauge. You can plug that port. It will tell you when you're empty but it won't really give you advance warning. You need a scale to do that.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?

Last edited by Bobby_M; 06-02-2008 at 03:51 PM.
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 06-02-2008, 08:03 PM   #9
IlliniSox4Life
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2008
Posts: 85
Liked 1 Times on 1 Posts

Default

Thanks for all the responses.

Fingers,
I paid $26 and change plus $10 shipping for the regulator. It is a taprite Series 740, and seems to be a pretty heavy duty one. I could tell the gauges were in good shape from the picture, so seemed like a solid deal.

__________________
IlliniSox4Life is offline
 
Reply With Quote Quick reply to this message
Old 06-02-2008, 08:44 PM   #10
findthefish
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2008
Location: Orange, CA
Posts: 484
Liked 4 Times on 3 Posts

Default

KegKits.com has the best prices I have found.
0-30 PSI - $5.80
0-2000 PSI - $7.44
http://www.kegkits.com/Merchant2/mer...gory_Code=GAUG

__________________

Kevin

The Bruery Provisions - Homebrewing supplies and equipment.
BrewCommune - Orange County home brew club, yeast database, recipes, and forum.

On Deck: Belgian IPA
Primary: nothing
Secondary: Traditional Mead
Kegged: APA, Cream Ale, Belgian Ale, Sour Belgian, Barrel Aged RIS

findthefish is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
paintball gun regulator cheap keg kit? ekjohns Bottling/Kegging 7 07-31-2009 04:45 PM
For Sale - WTB - Corny kegs and CO2 gauges/Regulator CrawGator For Sale 1 07-27-2009 05:55 PM
Replacing Regulator Gauges TerapinChef DIY Projects 5 02-12-2009 01:10 AM
Cheap low pressure regulator. Rhys79 Equipment/Sanitation 3 01-23-2009 09:00 PM
C02 regulator/gauges question Fingers Bottling/Kegging 1 02-12-2007 04:20 AM