Chia

Recipes 

I searched, but did not see what i was looking for. if this is a re-post please let me know.

The out fitting seems to be leaking beer. i changed all the gaskets on the out post, however when i put the keg to line connector on there is a beer and gas leak if it does not stand perfectly straight. i took the connector apart and made sure it was tight, but it is just two pieces of plastic (thought there would be more to it). my other keg works fine, so i am thinking that it has to be the out post.....once i finish the current keg i am going to change out posts and see if that is the case. if it is, can a person purchase a new pin lock out post? Thanks, Chia
p.s. while i was working on it, i did switch the poppets from the gas and liquid, but that did not fix the problem, so i am guessing that the poppet is not the issue.

__________________
Whitener Street Brewing Co.
My Friend's WebSite
www.brewer-engineering.com

flabyboy

Recipes 

Is your CO2 dropping slowly in your tank? I think I may be having the same problem with my outpost. My CO2 is slowly dropping

Chia

Recipes 

yep, the beer is fizzing and bubbling around the outpost

__________________
Whitener Street Brewing Co.
My Friend's WebSite
www.brewer-engineering.com

flabyboy

Recipes 

I'm going to transfer mine to a different keg and use the leaky one to store some beer line cleaner

beaksnbeer

Recipes 

Check the poppet on that post sounds like that's your problem, or the post needs o-rings.........my.02