Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Kenmore Model# 95882 Fridge Kegerator?
Reply
 
LinkBack Thread Tools
Old 12-04-2010, 03:51 PM   #1
mobly99
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
mobly99's Avatar
Recipes 
 
Join Date: Oct 2010
Location: Waukegan
Posts: 196
Liked 2 Times on 2 Posts
Likes Given: 2

Default Kenmore Model# 95882 Fridge to Kegerator conversion?

Just wondering if anyone has converted this to a kegerator? If so how many ball locks fit?

Kenmore 5.7 cu. ft. Compact Refrigerator

__________________

mobly99 is offline
 
Reply With Quote Quick reply to this message
Old 12-18-2010, 05:42 PM   #2
mudphud
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2010
Location: Boston, Jamaica Plain, MA
Posts: 1
Default

Anybody have easy access to this one to check it out and measure inside? I don't have a sears nearby but this looks very interesting. Maybe 3 cornies can fit?

__________________
mudphud is offline
 
Reply With Quote Quick reply to this message
Old 12-19-2010, 04:42 AM   #3
lombard
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Merritt Island, FL, Florida
Posts: 60
Liked 3 Times on 2 Posts

Default

I've been eyeballing that one for a commercial 1/2 barrel kegerator. Figured I could also have a couple of cornies in it as an alternative. That's a ways down the road though. I'm just finishing my 4 tap keezer and starting to brew up something to fill it with.

__________________
lombard is offline
 
Reply With Quote Quick reply to this message
Old 12-19-2010, 05:31 AM   #4
mobly99
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
mobly99's Avatar
Recipes 
 
Join Date: Oct 2010
Location: Waukegan
Posts: 196
Liked 2 Times on 2 Posts
Likes Given: 2

Default

I think the thing was built to be a commercial kegerator, there is a v notch in the hump for the compressor and the whole back plate is the refrigerant.

The door panel would definitely have to be trimmed out, but this thing has a slight possibility of holding 3 cornies.

I just haven't been back to a sears to check it out. Seems nice though, digital temp controller built in and everything.

__________________

Primary: Revelation Cream Ale
On Tap: Red Skies at Night, LHB Blond Ale, 224? Suburban Wheat Ale

mobly99 is offline
 
Reply With Quote Quick reply to this message
Old 03-15-2011, 09:25 PM   #5
OmahaVike
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Eastern, Iowa
Posts: 22
Liked 3 Times on 3 Posts

Default

Just got back from Sears with measurements, becuase 5.7 cu ft sounded REALLY good for a three tap system:

The base of the unit, where it has the vnotch hump is not really a v-notch. It's like this:

http://twitpic.com/49tr94

So it definitely won't work for a half barrel.

The base area, as I'm going to call it, where they have the humps for the compressor/etc is 7.5" tall. Above that, the fridge is 19" deep. It is also 21" wide, but I'd take off 1/4 to 1/2" for the tray moldings.

Finally the internal of the fridge is 28.5" high.

Hope it helps! I was really bummed that this won't work for me, but maybe will for you.

__________________
OmahaVike is offline
 
Reply With Quote Quick reply to this message
Old 03-15-2011, 10:26 PM   #6
MistyMountainHops
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2009
Location: Edmond, OK, Oklahoma
Posts: 224
Liked 2 Times on 2 Posts
Likes Given: 4

Default

Forgive my ignorance here, but if you are going to drop $318 on a 5.7 cu ft fridge, why not just get a slightly bigger freezer for less? I was at Home Creepo yesterday and saw a 7.2 cu ft freezer for like $180. Granted, you will need to buy a temperature controller and would have to load kegs via the top vs the front, but for more room and control over temp, it seems worth it to me.

__________________

"Offered a Bud Light, and a glass of water - I'd drink the water. You only have one liver, don't waste it on bad beer." - Brock Wagner

MistyMountainHops is offline
 
Reply With Quote Quick reply to this message
Old 03-16-2011, 05:55 AM   #7
OmahaVike
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Eastern, Iowa
Posts: 22
Liked 3 Times on 3 Posts

Default

because not everyone has a healthy enough back to lift a half barrel four feet into the air. with a front loading fridge, i can use a dolly to wheel it right up there.

but you're spot on, if i had the choice without health concerns, I'd go with a keezer.

__________________
OmahaVike is offline
 
Reply With Quote Quick reply to this message
Old 09-01-2011, 08:46 PM   #8
BoltsFan704
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Charlotte, NC
Posts: 63
Liked 3 Times on 2 Posts
Likes Given: 4

Default

Did anyone successfully convert this Kenmore? i just scored one on craigs list but mine has a small metal freezer on top.

__________________
BoltsFan704 is offline
 
Reply With Quote Quick reply to this message
Old 09-01-2011, 10:15 PM   #9
Slipgate
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: Damascus, MD
Posts: 590
Liked 14 Times on 14 Posts
Likes Given: 8

Default

Crap! I didn't see this one! I just got the one with the removable freezer tray (4.6 cf below) and plan on converting (and fully documenting) next week. The bigger one looks ideal! Might have to make another just for fun and sell it.

http://www.sears.com/shc/s/p_10153_1...=1314915187774

BTW: Keezers are NOT the same as refrigerator kegerators. Lots of people want to put kegerators in their bar. The small frig conversions fit under a countertop and look professional. I really have no interest in a keezer right now.

__________________
Slipgate is offline
 
Reply With Quote Quick reply to this message
Old 01-28-2012, 07:48 PM   #10
spokeydonkey
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: Somerville, MA
Posts: 1
Default

Just finished converting a Kenmore 461-95882 5.7 Cu. foot fridge (I got a floor model cheap at Sears). There are a few important details to note about converting it that I wish I'd known ahead of time, but the conversion was pretty straight forward.

First, the top of the fridge is a plastic shell which contains a thermostat board and controller (these are part of the front-mounted temperature display and controls on the exterior of the lid). You can unscrew the top and unplug the wires from the controls easily. There's about a half inch air gap between the lid and the top of the fridge, which is the exterior metal shell. Underneath that is about 2 inches of insulation, and then the plastic inner shell of the fridge. I'm fairly certain that this basic fridge is used as a Kenmore kegerator as well as a fridge, since the interior metal shell has a ~2" circular hole in its center. I drilled out this hole to do my conversion.

Now, the few issues:
1) As far as I can tell, there are no coolant lines running across the top of the fridge. they appear to all be in the back.

2) If you drill the hole in the center, you will hit the wires for the dome light. They're (annoyingly!) buried in the middle of the foam insulation, so I didn't see them when inspecting the fridge. I cut them, but since I disconnected the light switch, it wasn't an issue.

3) The air gap between the outer plastic shell and the top of the metal shell of the fridge itself is significant. You will probably wan't to mount your tower to the metal shell, so cold air doesn't leak.

Other than the lighting wire, it was a pretty straightforward job of converting it to a kegerator. It holds two corny kegs and a 5# C02 tank with some room to spare for bottled beer. It should also hold 1 corny keg + a better bottle fermentor (6 gal), but I haven't tried fermenting in it yet.

__________________
spokeydonkey is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
kenmore 4.6 cu ft mini fridge for kegerator? ekjohns Bottling/Kegging 12 05-01-2013 01:58 AM
What model Kegerator holds three kegs? Bulls Beers Bottling/Kegging 1 11-06-2010 12:33 AM
kenmore mine fridge dencob1 Bottling/Kegging 11 10-08-2010 05:14 PM
Keg fridge - Any certain brand/model jhubert Bottling/Kegging 3 12-12-2009 09:31 PM
Sears kenmore kegerator - anyone have one? Cincy_Ron Bottling/Kegging 2 09-11-2009 06:12 PM