Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > kegging and dispensing questions
Reply
 
LinkBack Thread Tools
Old 09-19-2012, 08:53 PM   #1
03rangerxlt
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: marietta, ga
Posts: 56
Default kegging and dispensing questions

I just got an old Perlick kegerator from my uncle thats in a bit of disrepair. Iplan on removing the tower, cleaning it up, and mounting it on my bar. The top and door need replaces, but that looks easy enough as they are made out of partical board. The rest of the kegerator look in decent enough nick, but I'm going to have to have a refrigeration specialist look at it as its not cooling. It most likely has a leak and needs recharged. I also got two regulators and two gas bottles with the thing. I will have to replace the gauges on the regulators though.

My wife wont let me mount a double tower; she says while we do drink a lot of beer, we don't drink enough to warrant having two kegs tapped. We recieved a keg for a wedding gift, so I will need to set up the system to work with that. (same type pictured here)



But, I also want the ability of being able to run a store bought keg of beer occasionally though it. Is there a setup that will let me run both alternately on the single tower? Or will I need to have two sets of lines, and just disconnect one from the tower and hook up the other when I am ready to use a different type of keg on it?

__________________
03rangerxlt is offline
 
Reply With Quote Quick reply to this message
Old 09-19-2012, 09:30 PM   #2
GilSwillBasementBrews
HBT_SUPPORTER.png
Feedback Score: 1 reviews
 
GilSwillBasementBrews's Avatar
Recipes 
 
Join Date: Jul 2012
Location: Eagleville, Pennsylvania
Posts: 2,036
Liked 138 Times on 119 Posts
Likes Given: 21

Default

I think you can get tap conversion kits to go from commercial to ball/pin quick disconnects.
EDIT:
http://www.homebrewtalk.com/f35/comm...system-124663/
Check out this thread.

__________________

Beer Plus Science = .....Good!!!!! By: Adam Savage

GilSwillBasementBrews is offline
 
Reply With Quote Quick reply to this message
Old 09-19-2012, 09:52 PM   #3
MannyZ
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Los Angeles, CA
Posts: 58
Liked 2 Times on 2 Posts
Likes Given: 48

Default

A setup like this should be all you need to switch between commercial Sankey kegs and Soda kegs.
http://www.northernbrewer.com/shop/c...rsion-kit.html

__________________
MannyZ is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dispensing and carbonating PSI questions... homebrewbeliever Bottling/Kegging 27 09-03-2012 08:54 PM
dispensing questions briggssteel Bottling/Kegging 3 08-14-2012 12:54 AM
Buying kegging/ draft dispensing equipment 2BeerOrNot2Beer Bottling/Kegging 1 06-26-2012 02:29 AM
New kegging questions Iceman6409 Bottling/Kegging 3 02-08-2012 08:28 PM
Kegging Questions Chibeast Bottling/Kegging 11 07-23-2007 06:01 PM