Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Keg connection problem

Reply
 
LinkBack Thread Tools
Old 03-06-2013, 09:46 PM   #1
Phoenix066
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Sydney, NSW
Posts: 7
Default Keg connection problem

Hi, yesterday I added 2 reconditioned cornelius kegs (pepsi ones). On one of then, I have found my co2 connector won't click on the gas out post. If I hold it down with the gas on, it will fill the keg, but it pops off if I stop pushing down.

Does this mean the pin inside the post, is too tight or something?

__________________
Phoenix066 is offline
 
Reply With Quote Quick reply to this message
Old 03-06-2013, 09:52 PM   #2
LLBeanJ
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
LLBeanJ's Avatar
Recipes 
 
Join Date: Feb 2012
Location: Windsor, CO
Posts: 1,233
Liked 202 Times on 158 Posts
Likes Given: 92

Default

Yes, it does sound like the pin inside the post, aka the poppet, is not depressing as far as it should. Disassemble the post and remove the poppet, then put it all back together. It's also possible that the poppet spring is too long and may need to be trimmed.

__________________
LLBeanJ is offline
 
Reply With Quote Quick reply to this message
Old 03-06-2013, 09:59 PM   #3
Phoenix066
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Sydney, NSW
Posts: 7
Default

Awesome, I might wait until it's empty again although to minimize infection
, thankyou

__________________
Phoenix066 is offline
 
Reply With Quote Quick reply to this message
Old 03-07-2013, 01:28 AM   #4
day_trippr
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Stow, MA
Posts: 9,402
Liked 1030 Times on 835 Posts

Default

^ You really don't need to hold off fixing that post problem. Just depressurize the keg, remove the post, cover the port with a piece of plastic wrap or something while you sort out the post, then sanitize the post when you put it back in place.

No big deal to fix, and it'll make living with that batch a lot easier...

Cheers!

__________________
day_trippr is online now
 
Reply With Quote Quick reply to this message
Old 03-07-2013, 10:58 PM   #5
DoubleD
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Posts: 13
Default

I had the exact same problem Monday with my liquid post when I was sanitizing my keg. The poppet was not seated right. I reseated it and it is working fine now.

__________________
DoubleD is offline
 
Reply With Quote Quick reply to this message
Old 03-08-2013, 01:10 AM   #6
Phoenix066
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Sydney, NSW
Posts: 7
Default

I de-pressurised, pulled it apart, put it back together. I need to push down hard to get it to click, but its clicks and stays. Thanks for the help guys!

__________________
Phoenix066 is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
20 oz co2 connection hamrd Bottling/Kegging 3 05-21-2012 04:22 PM
Keg Connection matthewgardner Equipment/Sanitation 1 05-11-2012 08:21 PM
Perlick/Shank Connection Problem uncleben113 Equipment/Sanitation 20 12-25-2011 09:20 PM
How to convert a wort chiller from a hose connection to a sink connection? wolfgre Beginners Beer Brewing Forum 13 08-05-2010 08:38 PM
Keg Connection jjbrew Equipment/Sanitation 8 12-21-2009 12:29 AM