Home Brew Forums > Home Brewing Beer > Bottling/Kegging > How much priming sugar?
Reply
 
LinkBack Thread Tools
Old 01-09-2012, 05:58 PM   #1
bbbblaine
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Location: vancouver, wa
Posts: 82
Default How much priming sugar?

Using the calculator located here:

This will be my first time bottling a batch that I cold crashed in my garage for a day at about 45*F. So my question is, how do I know what temperature to put into this calculator?

If I go with the temperature that the beer fermented at (70*F), I will need 20.63g of corn sugar. Or am I supposed to put the temperature that the beer is currently at now that I left it in the garage (45*F, means I would need 7.53g of corn sugar)?

I know that at lower temperatures the beer will already have more CO2 in it, which is why it requires less sugar to carbonate. But I only left it at the lower temperature for a day, and at that point fermentation was already completed so I don't think that it would have any more CO2 in it than it had when it was at 70* just the day before.

Advise please!

__________________
bbbblaine is offline
 
Reply With Quote Quick reply to this message
Old 01-09-2012, 06:02 PM   #2
weirdboy
HBT_LIFETIMESUPPORTER.png
Feedback Score: 4 reviews
Recipes 
 
Join Date: May 2009
Location: Los Angeles
Posts: 7,981
Liked 434 Times on 354 Posts
Likes Given: 63

Default

The temperature to use is basically the highest temperature the beer reached for a sustained period as fermentation is winding up, or after it finished fermenting. 70F sounds correct to me.

As an aside, you might want to just keep your beer at 45F for a few days, as this will help clarify it before priming & bottling.

__________________
weirdboy is offline
 
Reply With Quote Quick reply to this message
Old 01-09-2012, 06:03 PM   #3
Thehopguy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: san diego, ca
Posts: 526
Liked 10 Times on 6 Posts
Likes Given: 3

Default

How big is your batch, 20 grams is nothin!

__________________

On Deck: Double IPA, GTBT V3
Primary: GTBT APA
Bottled: GTBT V2, GTBT V1, Black IPA, Centennial IPA, Pumpkin Ale, Badboy IPA, Simarillo APA

Thehopguy is offline
 
Reply With Quote Quick reply to this message
Old 01-09-2012, 06:09 PM   #4
bbbblaine
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Location: vancouver, wa
Posts: 82
Default

Thanks for the tip. I may just keep it in the garage for another day or two in that case.

This is just a 2 gallon batch of ESB, and according to Northern Brewer an ESB is normally carbonated to 1.5 volumes. Does this sound correct to you guys? The beers I have made before have all been between 2-2.5 volumes of CO2. Would it make a big difference if I carbonated it more, or is that really just up to personal preference?

__________________
bbbblaine is offline
 
Reply With Quote Quick reply to this message
Old 01-09-2012, 06:46 PM   #5
DSmith
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Robbinsdale, MN
Posts: 789
Liked 67 Times on 55 Posts
Likes Given: 12

Default

I'm also cold crashing an ale for the first time (4 week primary), using the highest temperature that the beer was kept at (70F after active fermentation, 67F controlled temperature during active fermenation).

I did 2 ESB's back-to-back. One was 1.8 vol CO2 (after a friend talked me out of carbonating it to 1.5 vol based on his experience) and the second was 2.2 vol CO2. I liked the carbonation and head of the second one better and would repeat that.

The 2.2 vol CO2 seemed undercarbonated still compared to commercial american ales (obviously the ESB isn't in that category). I felt I had to defend/educate friends drinking it because it took a rough pour to get a 1" head. The 1.8 vol CO2 was practically flat.

I think it is personal taste and how many times you want to describe why it's flat beer.

__________________
DSmith is offline
 
Reply With Quote Quick reply to this message
Old 01-09-2012, 07:23 PM   #6
weirdboy
HBT_LIFETIMESUPPORTER.png
Feedback Score: 4 reviews
Recipes 
 
Join Date: May 2009
Location: Los Angeles
Posts: 7,981
Liked 434 Times on 354 Posts
Likes Given: 63

Default

Quote:
Originally Posted by DSmith View Post
I'm also cold crashing an ale for the first time (4 week primary), using the highest temperature that the beer was kept at (70F after active fermentation, 67F controlled temperature during active fermenation).

I did 2 ESB's back-to-back. One was 1.8 vol CO2 (after a friend talked me out of carbonating it to 1.5 vol based on his experience) and the second was 2.2 vol CO2. I liked the carbonation and head of the second one better and would repeat that.

The 2.2 vol CO2 seemed undercarbonated still compared to commercial american ales (obviously the ESB isn't in that category). I felt I had to defend/educate friends drinking it because it took a rough pour to get a 1" head. The 1.8 vol CO2 was practically flat.

I think it is personal taste and how many times you want to describe why it's flat beer.
Well to be fair in the UK they often have a sparkler attached to the faucet to get the foamy head with low carbonation.
__________________
weirdboy is offline
 
Reply With Quote Quick reply to this message
Old 01-09-2012, 07:30 PM   #7
Yooper
Ale's What Cures You!
HBT_ADMIN.png
Feedback Score: 0 reviews
 
Yooper's Avatar
Recipes 
 
Join Date: Jun 2006
Location: Gulf Coast, Winter Texan
Posts: 63,869
Liked 5323 Times on 3832 Posts
Likes Given: 1228

Default

1.5 volumes is just about flat. If you like your ESBs pretty flat, then that's probably "to style". I like almost all of my bottled beers carbed to 2.2-2.6 volumes so I would carb it up more.

__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

Vote for me for the AHA Governing Committee- Lorena Evans
http://www.homebrewersassociation.or...ttee/election/

Follow me on facebook: https://www.facebook.com/lorena.t.evans
But I'm pretty boring so don't expect much!
https://www.facebook.com/lorena.t.evans
Yooper is offline
 
Reply With Quote Quick reply to this message
Old 01-09-2012, 08:02 PM   #8
BrewThruYou
Feedback Score: 2 reviews
Recipes 
 
Join Date: Sep 2010
Location: Ambler
Posts: 1,691
Liked 39 Times on 36 Posts
Likes Given: 16

Default

Quote:
Originally Posted by Yooper View Post
1.5 volumes is just about flat. If you like your ESBs pretty flat, then that's probably "to style". I like almost all of my bottled beers carbed to 2.2-2.6 volumes so I would carb it up more.
I agree. Even though some styles are supposed to be low co2 volumes, it's just not for me...I carb them higher than the charts say.
__________________
BrewThruYou is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Corn Sugar vs Table Sugar for Priming danculwell Bottling/Kegging 29 09-20-2012 09:00 PM
Table sugar vs. invert sugar priming amounts badmajon Bottling/Kegging 2 10-11-2011 06:43 PM
Table sugar or priming lhbs sugar? stephen424 Bottling/Kegging 1 06-10-2010 11:48 PM
Brown sugar as priming sugar ratio? Ziggybrew Bottling/Kegging 4 03-22-2010 07:31 PM
Priming sugar vs Cane sugar meadows57 Bottling/Kegging 7 12-02-2009 03:12 AM



Newest Threads

LATEST SPONSOR DEALS