Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > How I built my tower cooler
Reply
 
LinkBack Thread Tools
Old 07-13-2008, 10:52 PM   #1
dmbmay98
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2008
Posts: 7
Default How I built my tower cooler

Since I have been having foamy beer with a tower, I have been looking for guides/internet instructions on how to build a blower with a computer fan. I wanted to put in my two cents for how I built mine and where I got the parts. Sorry I do not have any pictures but in case this helps anyone in the same situation. I have a Sanyo 4912 that I had to cool the tower

I started with the small project box at Radio Shack. It was the 4.99 one since I wanted to save space.

I then purchased an Antec 12V DC fan from Staples that had adjustable speeds of low medium high. It was 80mm and costs 9.99.

I purchased a DC adapter from Radio Shack that was 20.99 This was an AC to DC adapter and had volt selections of 3,7,12, and 13. I did not have that cell phone adapter to use.

I purchased some vinyl tubing at Home Depot 10 ft 1/2 diameter for 3.88.

I first cut out a small hole in the project box because I did not have a 3in hole saw. I then measured out a circle around the fan and cut that out using a dremel tule.

I then placed the screws through the plastic to line up the holes for the fan.

I then proceeded to cut out a small hole for the 1/2 tubing. I placed the holes for the tubing at the top of the project box.

I then cut out a small indent between where the two project boxes connect with a saw for the power cabling for the fan. Make sure this is small so no air can escape.

I then cut off the two ends of the DC Adapter and the Fan Adapter. I combined them and soldered them. I then placed electric tape over them.

Keep the DC adapter at 12v and the fan at high setting. I then put it in the refrigerator and used some tape to make sure it stood up. I cut the tubing down so that it was a few inches below the top of the tower and voila.

I ran the power cord out the front of the fridge due to how thin it was.

Hopefully it helps someone and sorry for no pictures.

__________________
dmbmay98 is offline
 
Reply With Quote Quick reply to this message
Old 07-13-2008, 11:02 PM   #2
gruversm
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
gruversm's Avatar
Recipes 
 
Join Date: Mar 2008
Location: Edwardsburg, MI, Michigan
Posts: 338
Liked 2 Times on 2 Posts
Likes Given: 1

Default

Great job! I would love to see pictures of your finished product.

__________________

On Tap:
Horehound Tripel,Gumballhead,Sierra Nevada Pale Ale, Founder's Breakfast Stout Clone, Hefeweizen
gruversm is offline
 
Reply With Quote Quick reply to this message
Old 07-14-2008, 11:59 AM   #3
Slipgate
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: Damascus, MD
Posts: 590
Liked 14 Times on 14 Posts
Likes Given: 8

Default

That sounds great! I plan on doing something very similar accept the Oster has a light inside that I plan on tapping for power.

__________________
Slipgate is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Converting a Single Tower to a Dual Tower?!? nunzio42 DIY Projects 5 09-12-2013 05:43 AM
Pics of my 48qt Cooler MLT I just built rcm_rx7 Home Brewing Photo Forum 5 10-31-2010 06:24 AM
Multi-tap tower out of regular tower? gonzoflick Equipment/Sanitation 16 06-20-2009 01:35 PM
Brew Tower Built from Exercise Equip. SirFizzle DIY Projects 8 04-15-2008 03:28 PM