Oh, and since I was in the market for this I have been doing a bunch of research on this freezer and it looks like it will fit 4 kegs and a 5# tank as long as you build a collar. Also please note that the OP uses a 10# and that is why he can only fit 3 with the tank.
Originally Posted by tmoney1224
I got this GE 7.0 off craigslist the other day, and sized it up and am reporting that it will hold 4 kegs w/ CO2 on the outside, or 3 kegs W/ CO2 on the inside.
This is 3 pin-locks and 1 ball-lock so 4 ball locks should fit easily. This height is the only concern if you are not wanting to build a collar. I have a ball-lock keg that has been converted to pin-lock, and with the pin-lock disconnect it is about 3/4 of an inch too tall. So, the ball-locks w/ disconnects may fit, but it would be very very close. The pin locks fit fine.
This is 3 pin-locks and my 10lb CO2 tank.
Here are just a couple more shots so you can see the height problem.
Pin lock connects on ball lock size keg.
3/4 inch measured gab