Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Hardware for my Keezer

Reply
 
LinkBack Thread Tools
Old 09-07-2010, 11:05 PM   #1
VikeMan
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Mechanicsburg
Posts: 62
Default Hardware for my Keezer

Buying hardware for my keezer build. I see regulators and distributors come with 1/4" or 5/16" barbs. How should I determine which to get? TIA!


---VikeMan

__________________
VikeMan is offline
 
Reply With Quote Quick reply to this message
Old 09-08-2010, 12:33 AM   #2
VikeMan
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Mechanicsburg
Posts: 62
Default

Actually I'd like to broaden the question... what I really need is a list of gas/liquid line parts I will need.

What kind/size of Hose/Fittings to go from CO2 tank to regulator?
Primary Regulator - what size connection (i.e. barb)?
What kind of gas hose from regulator to keg?
What kind of gas fitting for above hose ('keg end')?
What kind of liquid fitting for keg connection to liquid line?

(Been searching all night for such a list...to no avail). TIA!

---ViekMan

__________________
VikeMan is offline
 
Reply With Quote Quick reply to this message
Old 09-08-2010, 03:02 AM   #3
rawlus
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: milford, ma
Posts: 424
Liked 21 Times on 20 Posts
Likes Given: 11

Default

take a look at some of the all inclusive "kegging kits" at the big online retailers... they pretty much cover the basics.

typically you'll want 10' of 3/16" I.D. thick-wall beverage line per tap. you can always cut it shorter, but many get too little line and end up replacing it all to go longer.
Gas line is usually 1/4" I.D. tubing.
Barbs are usually 1/4" and work equally well for either 1/4" or 3/16" ID tubings.
I use MFL fittings on liquid lines which requires the use of barbed tailpieces and swivel nuts... the advantage is that the lines can be disassembled, swapped, used elsewhere without destroying them taking them on and off permanent barbs... as such, my Ball Lock disconnects have threaded MFL fittings instead of permanent barbs...
all hoses should be clamped down with hose clamps, either worm gear or oetiker ear/crimp types.
for the keg tap end you will need a complete shank assembly, including from back to front...
your hose clamp, shank hex or wing nut, 1/4"tailpiece, shank washer, shank body, shank flange, faucet coupling nut and faucet assembly... i would reccommend perlick faucets. again, look at the big retailer kits for "fridge conversion", they usually include all the parts to go through a fridge door or keezer collar in one kit.
you will want gasket/o-ring lube, spare o-rings for your kegs, etc.
in other words, for each beer you want to serve you will need:
MFL ball lock gas disconnect
MFL ball lock liquid disconnect
10' 3/16" ID liquid line
3-4' of 1/4"ID gas line
regulator with necessary fittings to connect 1/4"line
2 sets of 1/4" barbed swivel nuts
hose clamps for all connections
complete shank assembly with faucet

if you are running more than one keg at a time, then you may opt for dual regulators or a gas manifold to support multiple gas lines at the same pressure off one regulator.

__________________
rawlus is offline
DaBills Likes This 
Reply With Quote Quick reply to this message
Old 09-08-2010, 10:52 PM   #4
aksea102
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2009
Location: South Carolina, lowcountry!
Posts: 91
Default

Rawlus-
Your reply was uber helpful! Thanks for taking the time!

__________________
Quote:
Originally posted by YooperBrew:

"Don't assume I want a flippin' wheat beer because I have breasts."
aksea102 is offline
 
Reply With Quote Quick reply to this message
Old 08-23-2012, 04:03 PM   #5
DaBills
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Rochesterish
Posts: 256
Liked 31 Times on 14 Posts
Likes Given: 269

Default

Yeah rawlus that helped me too.

__________________
DaBills is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hardware necessary for Beergun Sol Bottling/Kegging 7 05-20-2010 10:36 PM
Hardware necessary for tubing to Perlicks Sol Bottling/Kegging 7 01-26-2010 09:40 PM
Help with hardware choices! WhiskeyScroggins Bottling/Kegging 6 02-03-2009 12:12 AM
Best Prices on CO2 hardware? Cpt_Kirks Bottling/Kegging 2 10-28-2008 01:07 AM
Kegs are ordered, now what other hardware do I need? brendon7800 Bottling/Kegging 3 01-08-2006 05:39 PM