Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > GR Style Regulator Parts Needed
Reply
 
LinkBack Thread Tools
Old 04-15-2010, 12:40 AM   #1
TRainH2o
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: North Georgia
Posts: 429
Liked 6 Times on 5 Posts
Likes Given: 5

Default GR Style Regulator Parts Needed

I have an older GR style regulator that leaks. It is a North American Dispense Systems model 70012. NADS, now Taprite, says that they no longer have the repair kit. Anyone know where to check. Keg Connection comes to mind. Other suggestions? Thanks.

__________________
TRainH2o is offline
 
Reply With Quote Quick reply to this message
Old 04-24-2010, 01:43 PM   #2
bendavanza
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Oak CLiff, TX
Posts: 2,348
Liked 15 Times on 15 Posts
Likes Given: 2

Default

I just found this and sent weekendbrewer an email about availability, I need a kit, too.
http://www.examiner.com/x-15785-Sacr...that-regulator

__________________
My brew tree
My RIMS toolbox
bendavanza is offline
 
Reply With Quote Quick reply to this message
Old 04-24-2010, 03:05 PM   #3
TRainH2o
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: North Georgia
Posts: 429
Liked 6 Times on 5 Posts
Likes Given: 5

Default

Thanks for the reply. I was told that it uses the same parts as a Micromatic regulator. I found one on Mark Powers.com. Thanks again.

__________________
TRainH2o is offline
 
Reply With Quote Quick reply to this message
Old 05-01-2014, 05:04 PM   #4
Jstout
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2014
Posts: 8
Liked 1 Times on 1 Posts

Default

I know this is an older post, but if anyone knows which micromatic regulator repair kit will work on the NADs 70012 please let me know. I'm trying to repair one. Thanks.

__________________
Jstout is offline
 
Reply With Quote Quick reply to this message
Old 05-08-2014, 04:52 PM   #5
Jstout
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2014
Posts: 8
Liked 1 Times on 1 Posts

Default

Just an FYI if you have this older model NADS 70012 regulator that needs repaired and you want to take a chance on fixing it. NADS was bought by Taprite and there is no longer parts for any NADS models. However, the Micromatic Economy Series Secondary Regulator Repair Kit 8000-15 Is almost an exact match. The Economy Series Regulator Seat Capsule Assy 8402 is a little off, but I got it to fit. I had to tighten it down firmly. Also, don't forget a 84010 Seat Spring. It's also slightly smaller, but worked. http://www.micromatic.com/draft-keg-...-pid-8011.html

I actually have two of these NADS Regulators and this Micromatic kit worked on one and not the other. Your odds are 50/50.

The older model Taprite repair kit looks like it could work also, but I didn't try it. The Diaphragm and Regulator Pressure Plate are one piece, but appear like they "might" work. http://www.chicompany.net/index.php?...gulator+repair

Also, the Draught Technologies repair kit looks like it might be an exact match, but again I haven't tried it. http://rapidswholesale.com/beer-supp...pair-pack.html

These are very old regulators and you might just want to buy a new one.

__________________

Last edited by Jstout; 05-08-2014 at 05:20 PM. Reason: New information
Jstout is offline
Stealthcruiser Likes This 
Reply With Quote Quick reply to this message
Old 05-23-2014, 07:09 PM   #6
Jstout
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2014
Posts: 8
Liked 1 Times on 1 Posts

Default

Update: Forget most of the above advice. The way to go is draught technologies repair kit from rapids wholesale. It's an exact match. The kit doesn't come with a Bonnet Gasket, but the micro matic one seems to work fine.

http://rapidswholesale.com/beer-supp...pair-pack.html

__________________
Jstout is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Propane gas manifold and the parts needed? SouthernYankee Equipment/Sanitation 9 09-27-2010 02:30 PM
For Sale - WTB: CO2 Regulator Replacement Parts doggage For Sale 4 04-03-2010 04:48 PM
Is a dual body regulator needed? mikejamesnelson Bottling/Kegging 8 02-23-2010 03:15 AM
A little help needed for keezer parts RBChallenger DIY Projects 7 03-15-2009 05:10 PM
What parts needed for corny rebuilds/operation Hikeon3 Bottling/Kegging 4 06-17-2008 09:33 PM