Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > First time force carbing

Reply
 
LinkBack Thread Tools
Old 04-11-2009, 10:41 PM   #1
xxdcmast
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Posts: 229
Default First time force carbing

Hey guys I just got my kegging equipment Friday and I filled my two cornys today.

I have the kegs hooked up to the tank but I have a question. I do not have a kegerator yet so Im trying to carb them at room temperature. Right now I have the PSI set to 15 on both kegs.

I see that most people here force carb cold but I dont have that option what should I set the pressure at without it? Currently room temp is about 60 degrees give or take.

Also when it comes time to server I should dial the co2 down to 5psi right?

Thanks

__________________
xxdcmast is offline
 
Reply With Quote Quick reply to this message
Old 04-11-2009, 10:59 PM   #2
Big10Seaner
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2008
Location: Illinois
Posts: 680
Liked 5 Times on 5 Posts

Default

Ideally you want to cool the beer before carbing, because you will use less CO2 to do so. I've never carbed at 60F, but beersmith is telling me it would require around 21 psi. 5 psi would be a good serving pressure. After it's carbed, vent the keg then set to serving pressure.

__________________

[B]The End of the Line Brewing
Primary: Saison
Secondary: Nada
On tap: Farm Pond IPA, Airstream Ale, Barn Door Dubbel, Saison, Oktoberfest ale
Bottled: Blackberry mead, RIS

Big10Seaner is offline
 
Reply With Quote Quick reply to this message
Old 04-11-2009, 11:05 PM   #3
jaja
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Posts: 153
Default

Yup the warmer the beer is the more C02 required. 15psi isn't enough. There are a stack of C02 charts that will tell you exactly what psi you require to achieve the carbonation you are after.

__________________
jaja is offline
 
Reply With Quote Quick reply to this message
Old 04-12-2009, 04:07 AM   #4
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 21,834
Liked 907 Times on 604 Posts
Likes Given: 26

Default

Actually it won't take more CO2, just higher pressure. At 60F, you'll need to raise the pressure to about 30psi and leave it there for about 2 weeks. You can speed that along by rocking the keg now and then or going as high as 50psi for a while.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 04-12-2009, 11:33 AM   #5
dzlater
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2008
Location: New Jersey
Posts: 1,040
Liked 26 Times on 25 Posts
Likes Given: 109

Default

Quote:
Originally Posted by Big10Seaner View Post
Ideally you want to cool the beer before carbing, because you will use less CO2 to do so. I've never carbed at 60F, but beersmith is telling me it would require around 21 psi. 5 psi would be a good serving pressure. After it's carbed, vent the keg then set to serving pressure.
I will be kegging my first batch soon and was wondering if you
chill the fermenter then rack to the keg and then hook up the gas,
rack to the keg hook up the gas and then chill,
or rack to keg chill and then hook up the gas?
Or any and all of the above?
__________________
dzlater is offline
 
Reply With Quote Quick reply to this message
Old 04-12-2009, 12:41 PM   #6
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 21,834
Liked 907 Times on 604 Posts
Likes Given: 26

Default

One good reason to chill the fermenter first is that it will clear the beer a lot more. Leave it cold for at least 24 hours. It doesn't really matter when you chill in relation to applying gas but the real carbonation will start happening when it finally gets cold.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 04-12-2009, 12:49 PM   #7
beerthirty
big beers turn my gears
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
beerthirty's Avatar
Recipes 
 
Join Date: May 2008
Location: Phoenix AZ
Posts: 2,651
Liked 23 Times on 11 Posts

Default

I always chill the fermenter but it is to cold crash the yeast. After racking to the keg I gas it and purge a few times to vent any O2. then gas it to 30PSI and disconnect the line(I don't have a spare line outside the kegerator yet). Every morning on the way out the door I rock it for a minute then gas it again. After a week of this, I put it into storage untill there is room in the kegerator. Once in the kegerator I set it to serving pressure(12-16psi). My kegerator holds 4 kegs with 3 of them on tap. I like to keep one extra cold for when one of the tapped kegs goes belly up.
The correct answer is "any or all of the above"

__________________
Quote:
Originally Posted by the_bird View Post
"I've got a fever... and the only prescription is, MORE CARBOYS!"
primary- Tangerine Dream, SWMBO slayer,
serving- amber ale hop experiment #6, Roggenbier, apfelwine
planning- Cru?
conditioning- 9/9/09 barleywine
Drink water?... Never, fish fornicate in it.--- W.C. Fields
Most problems can be solved with the proper application of force.
beerthirty is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
First time kegging question about force carbing GroosBrewz Soda Making 4 03-05-2009 07:45 PM
Force Carbing Dominator6 Bottling/Kegging 5 05-04-2008 04:05 AM
how much force carbing? ski36t Bottling/Kegging 4 03-30-2007 02:59 PM
Force Carbing? MilwaukeesBus Bottling/Kegging 9 03-14-2007 10:07 PM
Need help with force carbing Craig5_12 Bottling/Kegging 21 03-03-2007 03:36 PM