Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Do I need to replace lines for Kegging?
Reply
 
LinkBack Thread Tools
Old 08-09-2012, 01:15 AM   #1
Threetall
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Decatur, GA
Posts: 91
Liked 3 Times on 2 Posts

Default Do I need to replace lines for Kegging?

So I just got 2 corny kegs and 5 lb co2 tank from a friend and a couple of lines. 1 is a line for what looks to be for co2, the other line is for transfer between kegs. The lines have been sitting around for I don't know how many years in the person's basement and are some kind of braided material. Do I need to replace the lines, or can I give them a good cleaning? Also the clamps on the braids are a bit rusty.

__________________
Threetall is online now
 
Reply With Quote Quick reply to this message
Old 08-09-2012, 01:47 AM   #2
certaut
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: hughes springs, Texas
Posts: 315
Liked 13 Times on 10 Posts
Likes Given: 1

Default

I have some hoses that have been in use for 10 years. I have a six foot piece of 4" PVC with a cap cemented to one end and stood up with the cap end down. I filled it up with PBW and soak the hoses in it, Blow off tubes, siphon hose, beer lines,,,, secure the lines with clothespins or alligator clips works well cleans out the scum and leaves them springtime fresh

__________________

the brewer makes the beer, not the equipment
let the beer tell you when it is finished

certaut is offline
 
Reply With Quote Quick reply to this message
Old 08-09-2012, 03:30 AM   #3
phreaky
HBT_SUPPORTER.png
Feedback Score: 1 reviews
Recipes 
 
Join Date: Dec 2010
Location: Independence, MO
Posts: 137
Liked 21 Times on 14 Posts
Likes Given: 3

Default

While lots of lines will last several years (I've known one bar who hasn't changed for 4-5 years) I found I can replace all the lines in my kegorator for 10-20 bucks. 10 bucks for new lines every year is nothing compared to the price of the beer I put through it. Just a thought.

__________________
phreaky is offline
 
Reply With Quote Quick reply to this message
Old 08-09-2012, 04:43 AM   #4
bwarbiany
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
bwarbiany's Avatar
Recipes 
 
Join Date: Jul 2011
Location: Laguna Hills, CA
Posts: 1,898
Liked 596 Times on 352 Posts
Likes Given: 5

Default

Line is cheap. While someone like certaut above has had some lines that have lasted a very long time, it sounds like he also takes great care of those lines to ensure they remain clean. Can you be sure your friend was as diligent?

If not, I say replace it.

__________________
bwarbiany is offline
 
Reply With Quote Quick reply to this message
Old 08-09-2012, 12:20 PM   #5
tnlandsailor
Feedback Score: 0 reviews
 
tnlandsailor's Avatar
Recipes 
 
Join Date: Apr 2005
Location: Knoxville, TN
Posts: 525
Liked 15 Times on 12 Posts

Default

Lines don't last forever - especially other people's lines. I would recommend replacing them so that you know that they are new. Get 3/16" ID x 7/16" OD beer line (line that is actually made for beverages). Once you know the line is new, it will last for a long long time. My current lines are about 7 years old. What is working in your favor is that the lines are always refrigerated which really cuts down the growth of anything funky. About 3 or 4 times a year, I fill the lines with PBW solution and let them soak overnight, then purge them with water. Once lines warm up to room temp and sit around for months and months, all bets are off. Replace the lines and buy some extra and have that hanging around just in case.

__________________

Prosit!

Hands-On Brewing

Dennis Collins
Knoxville, TN
Innovative Homebrew Solutions
Home of the Hop Stopper!
www.ihomebrewsolutions.com

tnlandsailor is offline
 
Reply With Quote Quick reply to this message
Old 08-09-2012, 03:27 PM   #6
Threetall
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Decatur, GA
Posts: 91
Liked 3 Times on 2 Posts

Default

Thanks.
It also looks like the plugs on one of the kegs have rust on them too. How do I clean those?

__________________
Threetall is online now
 
Reply With Quote Quick reply to this message
Old 08-11-2012, 02:47 PM   #7
BirdmanBrewingCo
Sponsor
HBT_SPONSOR.png
HomeBrewTalk 2012 Vendor Giveaway Participate
Vendor Ads 
Feedback Score: 2 reviews
 
BirdmanBrewingCo's Avatar
Recipes 
 
Join Date: Jun 2011
Location: Cincinnati, OH
Posts: 1,140
Liked 22 Times on 20 Posts
Likes Given: 3

Default

Quote:
Originally Posted by bwarbiany View Post
Line is cheap. While someone like certaut above has had some lines that have lasted a very long time, it sounds like he also takes great care of those lines to ensure they remain clean. Can you be sure your friend was as diligent?

If not, I say replace it.
+1. It's too inexpensive to take the risk of not replacing.
__________________
Birdman Brewing Company
Homebrew and Draft Beer Gear
Exploring Beer. Cheaper.

www.birdmanbrewing.com
401-400-BREW (2739)

Facebook BirdmanBrewingCompany

BeerSmith 2.1 just $21.89 every day!
BirdmanBrewingCo is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
does anyone use these to replace picnic taps? kappclark Bottling/Kegging 1 07-10-2011 02:45 AM
replace regulator barb with MFL? straycat Bottling/Kegging 1 04-27-2011 03:59 AM
How easy is it to replace a tap tower? throwbookatface Bottling/Kegging 6 08-10-2010 01:14 PM
TAD or Mini Keg to replace conditioning? boodyrischous Bottling/Kegging 5 07-02-2008 08:09 PM
Do I need to replace this overpressure fitting SoCalBrewing Bottling/Kegging 7 07-24-2007 09:04 PM