Spike Brewing 12.5 Conical Fermenter Giveaway - Enter Now!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Dented keg :(

Reply
 
LinkBack Thread Tools
Old 02-22-2009, 04:44 PM   #1
claphamsa
Professional Jezter PWNZR
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
claphamsa's Avatar
Recipes 
 
Join Date: Dec 2007
Location: TK PK
Posts: 4,913
Liked 28 Times on 24 Posts
Likes Given: 1

Default Dented keg :(

What would you do with a keg with a tiny dent right around the lip? It wont seal (i filled it with water and shook, and water came out). where would you go to get it fixed (or should I just take a wrench and hope i can knock the dent out myself.

And if it cant be fixed... what do you do with a dented keg?

__________________

I collect magnetic bottle openers... so if you see something nice......

claphamsa on untappd

claphamsa is offline
 
Reply With Quote Quick reply to this message
Old 02-22-2009, 04:51 PM   #2
fifelee
Feedback Score: 0 reviews
 
fifelee's Avatar
Recipes 
 
Join Date: Dec 2006
Location: Vaughn, MT
Posts: 1,102
Liked 33 Times on 24 Posts
Likes Given: 9

Default

I don't have experience straightening kegs, but I have done some sheet metal work. Do your best to straighten it with a wrench. Don't use a pliers or any other tool with a textured gripping surface that could leave marks. Then get a heavy and flat piece of steel and hold it on the back side as you tap with a hammer on the front side. If that doesn't work you have a neat flower pot.

__________________
fifelee is offline
 
Reply With Quote Quick reply to this message
Old 02-22-2009, 04:54 PM   #3
wildwest450
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2007
Posts: 9,099
Liked 164 Times on 149 Posts
Likes Given: 4

Default

Quote:
Originally Posted by fifelee View Post
I don't have experience straightening kegs, but I have done some sheet metal work. Do your best to straighten it with a wrench. Don't use a pliers or any other tool with a textured gripping surface that could leave marks. Then get a heavy and flat piece of steel and hold it on the back side as you tap with a hammer on the front side. If that doesn't work you have a neat flower pot.
+1, Also lots of keg lube on the o-ring AND on the inside of the lip will help to seal it if you can get most of the dent out.
__________________
wildwest450 is offline
 
Reply With Quote Quick reply to this message
Old 02-22-2009, 05:06 PM   #4
claphamsa
Professional Jezter PWNZR
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
claphamsa's Avatar
Recipes 
 
Join Date: Dec 2007
Location: TK PK
Posts: 4,913
Liked 28 Times on 24 Posts
Likes Given: 1

Default

Quote:
Originally Posted by fifelee View Post
I don't have experience straightening kegs, but I have done some sheet metal work. Do your best to straighten it with a wrench. Don't use a pliers or any other tool with a textured gripping surface that could leave marks. Then get a heavy and flat piece of steel and hold it on the back side as you tap with a hammer on the front side. If that doesn't work you have a neat flower pot.
interesting.... sounds like an interesting Sunday project! (was about to get pliers )
__________________

I collect magnetic bottle openers... so if you see something nice......

claphamsa on untappd

claphamsa is offline
 
Reply With Quote Quick reply to this message
Old 02-22-2009, 05:14 PM   #5
wildwest450
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2007
Posts: 9,099
Liked 164 Times on 149 Posts
Likes Given: 4

Default

Quote:
Originally Posted by claphamsa View Post
interesting.... sounds like an interesting Sunday project! (was about to get pliers )
You could use pliers because that metal is easy to bend, but I would put an old washrag around the lip.
__________________
wildwest450 is offline
 
Reply With Quote Quick reply to this message
Old 02-22-2009, 08:31 PM   #6
MoRoToRiUm
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Posts: 1,413
Liked 3 Times on 3 Posts

Default

+1 on straightening it some- Main other thing (other then keg lube as posted) is pressurize it with about 30 PSI- corny kegs are designed for pressure, and without about 30 PSI (and then vent if desired) they won't seal correctly. Hope this helps!

__________________
Broken Face Brewery
Est. 2008
MoRoToRiUm is offline
 
Reply With Quote Quick reply to this message
Old 02-23-2009, 01:58 AM   #7
golfnmotorcycles
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Caruthersville, MO
Posts: 73
Default

A good idea when trying to straiten a dent in metal is to use a block of wood, if room permits. If the dent is away from the lip some, you might try a c-clamp right on the dent.

I have one with a pretty serious dent where the keg lid locks, almost as if something fell on it and pressed the linkage into the lid. I worked it enough to get it to seal, once, but the next time I messed with it I couldn't get it to seal to savce my life

As for what to do with a keg that has a dented lid and won't seal, no matter what.....I store starsan in mine.

__________________
golfnmotorcycles is offline
 
Reply With Quote Quick reply to this message
Old 02-23-2009, 02:19 AM   #8
beerthirty
big beers turn my gears
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
beerthirty's Avatar
Recipes 
 
Join Date: May 2008
Location: Phoenix AZ
Posts: 2,651
Liked 23 Times on 11 Posts

Default

I have had luck treating it like a truck tire with a bead leak. Lube the seal and install the lid, pressurize it and leave the air connected. Tap the leaking area with a hammer until the leak stops. I used an air compressor with a gas in fitting on the hose dialed down to 30PSI. CO2 is to expensive to waste on fixing a leak.

__________________
Quote:
Originally Posted by the_bird View Post
"I've got a fever... and the only prescription is, MORE CARBOYS!"
primary- Tangerine Dream, SWMBO slayer,
serving- amber ale hop experiment #6, Roggenbier, apfelwine
planning- Cru?
conditioning- 9/9/09 barleywine
Drink water?... Never, fish fornicate in it.--- W.C. Fields
Most problems can be solved with the proper application of force.
beerthirty is offline
 
Reply With Quote Quick reply to this message
Old 02-24-2009, 03:05 AM   #9
fifelee
Feedback Score: 0 reviews
 
fifelee's Avatar
Recipes 
 
Join Date: Dec 2006
Location: Vaughn, MT
Posts: 1,102
Liked 33 Times on 24 Posts
Likes Given: 9

Default

Quote:
Originally Posted by wildwest450 View Post
You could use pliers because that metal is easy to bend, but I would put an old washrag around the lip.
Good idea.
__________________
fifelee is offline
 
Reply With Quote Quick reply to this message
Old 02-24-2009, 05:39 PM   #10
springer
Feedback Score: 0 reviews
 
springer's Avatar
Recipes 
 
Join Date: Feb 2008
Location: Wappingers falls NY
Posts: 4,990
Liked 20 Times on 19 Posts

Default

Quote:
Originally Posted by claphamsa View Post
What would you do with a keg with a tiny dent right around the lip? It wont seal (i filled it with water and shook, and water came out). where would you go to get it fixed (or should I just take a wrench and hope i can knock the dent out myself.

And if it cant be fixed... what do you do with a dented keg?
have you actually pressure tested the Keg? Some of mine are a little banged up but they seal when I hit them with Gas. I would try some keg lube on the o ring and apply the pressure. One of mine wont seal till it hits about 30 psi then I can back it down.
__________________

'The taxpayer: That's someone who works for the federal government but doesn't have to take the civil service examination.'- Ronald Reagan

springer is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dented SS Pot Still OK? Ksosh Equipment/Sanitation 7 07-20-2009 03:50 AM
Dented cans? Wereling Beginners Beer Brewing Forum 12 12-27-2007 08:10 PM
Dented lid question gpogo Equipment/Sanitation 2 10-26-2007 02:22 PM
Dented better bottle Funkenjaeger Equipment/Sanitation 13 08-18-2007 07:37 AM
How dented is too dented? Reverend JC Bottling/Kegging 6 01-18-2007 10:37 PM