The Great Bottle Opener Giveaway

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Co2 psi problems

Reply
 
LinkBack Thread Tools
Old 07-23-2011, 09:51 PM   #1
texbrewer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2010
Location: Houston, Texas
Posts: 9
Default Co2 psi problems

So, I have my 5# co2 tank hooked up to my corny keg. The chest freezer is set to 38 degrees with a compensation of 2 degrees. I set the gauge to just under 12psi.

The problem is that the psi keeps dropping to 8 over night. I have to adjust it every day. I checked for leaks, and I have nothing.

I read on an old thread that a guy had the same problem. Apparently all he had to do is adjust the check valve. Unfortunately, he gave no instructions or insight on how to do that.

Any suggestions?

__________________
texbrewer is offline
 
Reply With Quote Quick reply to this message
Old 07-23-2011, 10:34 PM   #2
GodsStepBrother
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: , Texas
Posts: 1,263
Liked 25 Times on 23 Posts
Likes Given: 12

Default

Are you hooking up your gas to the keg turning it on then adjusting your Psi? Make sure you have your gas connection disconnected, adjust the psi inside of the line, then once it is where you want it hook it up to your keg.

I do not know if this is what is going on with your system? Explain a bit more your process if you can.

__________________
GodsStepBrother is offline
 
Reply With Quote Quick reply to this message
Old 07-26-2011, 02:01 AM   #3
Fantastical
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2010
Location: Kelowna, B.C.
Posts: 275
Liked 4 Times on 4 Posts
Likes Given: 1

Default

Is the regulator in the freezer? They are affected by temperature and will not operate correctly in a keezer.

Set the temp with it at room temp.

__________________
Fantastical is offline
 
Reply With Quote Quick reply to this message
Old 07-26-2011, 02:09 AM   #4
stratslinger
Brewing Thespian
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
stratslinger's Avatar
Recipes 
 
Join Date: Dec 2010
Location: Terryville, CT
Posts: 1,821
Liked 105 Times on 91 Posts
Likes Given: 81

Default

Quote:
Originally Posted by Fantastical View Post
Is the regulator in the freezer? They are affected by temperature and will not operate correctly in a keezer.

Set the temp with it at room temp.
This is not, as a general rule, a true statement.

My regulator sits in my kegerator and works perfectly. Plenty of other folks on this board have similar setups.

What will happen if you keep things in your keezer/kegerator is that the high side valve will show significantly lower pressure, since the pressure inside the tank drops with the lower temperature. But the low side valve works, just the same.
__________________
stratslinger is offline
 
Reply With Quote Quick reply to this message
Old 07-26-2011, 03:07 AM   #5
DannPM
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: KC Area, KS
Posts: 1,829
Liked 20 Times on 18 Posts
Likes Given: 34

Default

Did you pop the seat by turning it to 30-40 PSI briefly? If there is a leak you will hear it at 40 PSI. If there is no leak it might be a problem with the diaphragm or o-ring of the regulator. I had a generic one that I f'd up but then got a Taprite top of the line one and it seems to be working great now!

__________________

Time to have some fun

DannPM is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Regulator problems? Or Judo problems? Judochop Bottling/Kegging 10 08-08-2012 01:31 AM
CO2 Problems Montanaandy Bottling/Kegging 20 11-21-2009 04:29 AM
dry hop in keg? Problems? Rook Bottling/Kegging 11 04-18-2009 01:44 AM
Keg Problems!!?!?!!?! Jimbob Bottling/Kegging 13 07-05-2008 05:37 AM
Keg Problems rbankert Bottling/Kegging 10 02-06-2008 03:49 AM