trainfever

Recipes 

Hello All:
I am in the process of accumulating parts to build my keezer. It will have room for 4 kegs. Right now my set up will only accomodate 1 keg and I want to expand it with a manifold. I have the tools and equipment to make my own manifold but I would like to see exactly what all is included. So I was wondering if it would be possible for those of you with manifilds to post a picture of it? and your CO2 set up? thanks.

__________________
Yes, I am out of my mind, it's dark and scary in there.

trainfever

Recipes 

nobody? nobody at all?

__________________
Yes, I am out of my mind, it's dark and scary in there.

DavidP

Recipes 

I have a two-way manifold from Northern Brewer, and what you see online is exactly what you get. It' a piece of extruded aluminum with a circular center hole which is tapped for the gas in & plug. Then two holes are drilled in the side for the gas outs. I think most of the cost of these things is wrapped up in the check valves. KegConnection.com has some reasonably-priced models.

trainfever

Recipes 

Well I have a few pieces of 1" square aluminum stock that are 8" long. I also have a small machine shop(metal cutting lathe, drill press, grinders) so I thought I would build the manifold myself. I just wanted to see what others had so I could get a few ideas.

__________________
Yes, I am out of my mind, it's dark and scary in there.

SeamusMac

Recipes 

If you decide to make your own, perhaps you'd consider selling one to me?

__________________
Primary: Edwort's Apfelwein
Primary: Brewingcentres Pale Ale
Primary: Brewcraft - Cheap 'n' Shiddy Bavarian Wheat

Kegged: Brewcraft - Cheap 'n' Shiddy Bavarian Wheat
Kegged: Brewcraft - Enhanced Dutch Lager
On Tap: Brewcraft - Irish Stout

bendavanza

Recipes 

Ideally you would have shutoffs with check valves for each out port, and another one on the regulator's output. Take a look at any of the hb store websites: the money, as DavidP states, is in the check valves. other than that it's brass tees or a chunk of aluminum.

Clonefarmer

Recipes 

__________________
"Just remember Scooty Puff Jr. sucks!"....Philip J. Fry

eriktlupus

Recipes 

if all you want is to split your gas after reg line then this is what your looking for http://www.midwestsupplies.com/products/ProdByID.aspx?ProdID=8136

__________________
primary1 :UTOPIA BABY(still searching for it)
secondary:middling bastard ipa
kegged:simcoe blonde, crystal pale ale, yellow jacket golden ale, lemon shandy blonde
DRINKIN DAWG BREWERY
LET'S GO RED WINGS


join michigan mashers here

extraction calculator
grains in pounds(G) X 36(average points per gallon of grains) / batch size in gallons(g) = maximum efficiency(ME)
OG / ME = brewhouse efficiency