Happy HolidaySs Giveaway - Last Sponsor Giveaway of the Year!

Come Enter the BrewDeals/FastFerment Giveaway!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > CO2 distribution. Need some advice.
Reply
 
LinkBack Thread Tools
Old 03-01-2010, 08:30 PM   #1
JakeTheHopDog
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2010
Location: Spring Hill, FL
Posts: 361
Liked 2 Times on 2 Posts

Default CO2 distribution. Need some advice.

Planning out my Keezer build and need advice on CO2 side. Want to mount the CO2 tank on the outside and I plan on having 3 taps, 1 Sanke and 2 Homebrew. Will a 3 way distribution block be sufficient or should I go with 3 secondary’s? Distribution block or secondary's will be mounted inside. 3 secondary’s jumps the cost about $100, so is it worth the expense? Drink mostly IPA’s and various other ale’s and lagers.

__________________
JakeTheHopDog is offline
 
Reply With Quote Quick reply to this message
Old 03-01-2010, 08:36 PM   #2
lschiavo
Drinks Beer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
lschiavo's Avatar
Recipes 
 
Join Date: Sep 2009
Location: Surrounded by Yoopers
Posts: 3,977
Liked 782 Times on 522 Posts
Likes Given: 541

Default

I have a fridge that fits 4 corny's. I mounted a 5-port block with check valves in the fridge. And ran a line to the regulator on the outside of the fridge. It works fine for me but it would be nice to have a dual regulator for force carbing. The fifth port is nice as its always available for cleaning or purging without disconnecting a keg.

__________________
lschiavo is offline
 
Reply With Quote Quick reply to this message
Old 03-01-2010, 08:37 PM   #3
LooyvilleLarry
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Louisville,KY
Posts: 988
Liked 4 Times on 4 Posts
Likes Given: 2

Default

Why not use a manifold? I just bought a 4 port for $60.

__________________
Primary
Orange Cascade Pale Ale -

Secondary

Kegged
BeeCave Haus Ale - 6%
Bells Two Hearted, round 2- 6.1%
SNPA Clone (Chilled )
Hard Lemonade

Shiraz - 6 gal
LooyvilleLarry is offline
 
Reply With Quote Quick reply to this message
Old 03-01-2010, 08:50 PM   #4
GilaMinumBeer
In yo' garage, steelin' yo parts.
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
GilaMinumBeer's Avatar
Recipes 
 
Join Date: Jan 2008
Location: Oblivion
Posts: 48,423
Liked 4882 Times on 4470 Posts
Likes Given: 60

Default

the choice between secondary regs or manifolds/blocks depends on whether or not you will EVER want to carb at differing volumes. Ever do wheats or belgians?

__________________
GilaMinumBeer is offline
 
Reply With Quote Quick reply to this message
Old 03-01-2010, 11:55 PM   #5
JakeTheHopDog
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2010
Location: Spring Hill, FL
Posts: 361
Liked 2 Times on 2 Posts

Default

Quote:
Originally Posted by lschiavo View Post
I have a fridge that fits 4 corny's. I mounted a 5-port block with check valves in the fridge. And ran a line to the regulator on the outside of the fridge. It works fine for me but it would be nice to have a dual regulator for force carbing. The fifth port is nice as its always available for cleaning or purging without disconnecting a keg.
That's what I'm thinking, but if I get 2 regulators, I'll still neen a manifold to split it up, at least a 2 port. Might as well get three regulators for a bit more.

Quote:
Originally Posted by LooyvilleLarry View Post
Why not use a manifold? I just bought a 4 port for $60.
Sorry, called it a distribution block, not a manifold.

Quote:
Originally Posted by GilaMinumBeer View Post
the choice between secondary regs or manifolds/blocks depends on whether or not you will EVER want to carb at differing volumes. Ever do wheats or belgians?
I do want to be able to carb while serving. Some have said to just cut out the serving valves and bring the pressure up. Crack them back open for a bit when needed.

Haven’t brewed any wheat’s or Belgians, but I have a Grand Cru coming up pretty soon on my "To brew List". Anyone know if a Grand Cru going to require different pressure?
__________________
JakeTheHopDog is offline
 
Reply With Quote Quick reply to this message
Old 03-02-2010, 12:27 AM   #6
Bensiff
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Bensiff's Avatar
Recipes 
 
Join Date: Mar 2008
Location: , Washington, the state
Posts: 4,528
Liked 323 Times on 251 Posts
Likes Given: 53

Default

I run a dual primary setup to make life easy when I need different pressures. On one of the regs I have a dual manifold, the other reg has a single outlet. This gives my two tap system an extra line that is easy to grab to CO2 purge and what not newly filled kegs as they go into the lagering fridge.

__________________
Bensiff is offline
 
Reply With Quote Quick reply to this message
Old 03-02-2010, 02:59 PM   #7
lschiavo
Drinks Beer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
lschiavo's Avatar
Recipes 
 
Join Date: Sep 2009
Location: Surrounded by Yoopers
Posts: 3,977
Liked 782 Times on 522 Posts
Likes Given: 541

Default

Quote:
Originally Posted by JakeTheHopDog View Post
That's what I'm thinking, but if I get 2 regulators, I'll still neen a manifold to split it up, at least a 2 port. Might as well get three regulators for a bit more.



Sorry, called it a distribution block, not a manifold.



I do want to be able to carb while serving. Some have said to just cut out the serving valves and bring the pressure up. Crack them back open for a bit when needed.

Haven’t brewed any wheat’s or Belgians, but I have a Grand Cru coming up pretty soon on my "To brew List". Anyone know if a Grand Cru going to require different pressure?
When I started kegging, I already had a tank and single regulator. I just bought the 5-port block and was up and running. I have been able to make everything work fine but, if I was starting from scratch, after using my setup for a while now, I would at least go with a dual regulator. Probably even a triple as I also make soda for the kids.

Just think through what you would like to accomplish with your system and if you can afford the components, set it up right the first time. You wont be sorry that you have 2 or 3 dedicated pressures to choose from. Even if they usually end up set the same, you at least still have the option.
__________________
lschiavo is offline
 
Reply With Quote Quick reply to this message
Old 03-02-2010, 11:13 PM   #8
JakeTheHopDog
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2010
Location: Spring Hill, FL
Posts: 361
Liked 2 Times on 2 Posts

Default

Quote:
Originally Posted by lschiavo View Post
When I started kegging, I already had a tank and single regulator. I just bought the 5-port block and was up and running. I have been able to make everything work fine but, if I was starting from scratch, after using my setup for a while now, I would at least go with a dual regulator. Probably even a triple as I also make soda for the kids.

Just think through what you would like to accomplish with your system and if you can afford the components, set it up right the first time. You wont be sorry that you have 2 or 3 dedicated pressures to choose from. Even if they usually end up set the same, you at least still have the option.
I couldn't agree with you more and that what I'm going to do, 3 regulators. Even SWMBO told me the same thing you did, do it right the first time. Gotta love that girl!

I live 5 minutes from MicroMatic's Southeast Warehouse where I could go and pick up anything they sell, so I checked out their website for regulators. Man, they are nice, until you look at the prices. They are proud of them. I’m thinking I’ll just work with KegConnections to put everything together in one big package.

Thanks everyone for the advice.
__________________
JakeTheHopDog is offline
 
Reply With Quote Quick reply to this message
Old 03-03-2010, 12:08 AM   #9
Snausages01
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: Bakersfield, CA
Posts: 129
Liked 3 Times on 3 Posts
Likes Given: 3

Default

At minimum I'd use a dual regulator. If I were only going to have three kegs, I'd just use secondary regulators. If I were going to have a lot of kegs, I'd use the dual in conjunction with the manifolds. Ideal it would be nice to have a regulator for each keg, but for the cost of it I couldn't justify it at this time (have 8 kegs).

Keg connection is a pretty good store; I wouldn’t hesitate to order from them again. Just double check your order when you get it. Make sure the kegs hold pressure and you have the right posts on the kegs. I had a keg that wouldn’t hold pressure, but they sent me a new pressure relief vale. I also found a keg the other day that had two gas posts, but I haven’t contacted them yet (probably won’t since I ordered a few months back). If you get manifolds specify which ones you want (the straight ones or blue ones). Also, I highly recommend the taprite regulators with the red adjustable handle.

Here is a picture of my manifold. I don't have the second one hooked up yet.

__________________

-Chris

Snausages01 is offline
 
Reply With Quote Quick reply to this message
Old 03-03-2010, 02:00 PM   #10
jgourd
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2010
Location: Louisiana
Posts: 816
Liked 18 Times on 13 Posts
Likes Given: 3

Default

Quote:
Originally Posted by snausages01 View Post
at minimum i'd use a dual regulator. If i were only going to have three kegs, i'd just use secondary regulators. If i were going to have a lot of kegs, i'd use the dual in conjunction with the manifolds. Ideal it would be nice to have a regulator for each keg, but for the cost of it i couldn't justify it at this time (have 8 kegs).

Keg connection is a pretty good store; i wouldn’t hesitate to order from them again. Just double check your order when you get it. Make sure the kegs hold pressure and you have the right posts on the kegs. I had a keg that wouldn’t hold pressure, but they sent me a new pressure relief vale. I also found a keg the other day that had two gas posts, but i haven’t contacted them yet (probably won’t since i ordered a few months back). If you get manifolds specify which ones you want (the straight ones or blue ones). Also, i highly recommend the taprite regulators with the red adjustable handle.

Here is a picture of my manifold. I don't have the second one hooked up yet.
i want it!!! ;d
__________________
jgourd is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
IBU Distribution mroberts1204 General Techniques 2 09-06-2009 09:35 PM
propane distribution rarjr Brew Stands 10 06-23-2009 06:42 PM
Gas distribution. Bender Equipment/Sanitation 5 01-22-2009 09:32 PM
tubing and co2 distribution debtman7 Bottling/Kegging 16 11-06-2006 03:52 AM



Newest Threads

LATEST SPONSOR DEALS