Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Cheaper keezer moisture solution
Reply
 
LinkBack Thread Tools
Old 07-03-2014, 03:19 PM   #1
nobeerinheaven
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: Lafayette, IN
Posts: 39
Liked 2 Times on 2 Posts
Likes Given: 5

Default Cheaper keezer moisture solution

To get a nice dry keezer environment, it's not necessary to spend $20-40 bucks on an evadry. The internals are only silica gel and a heating element. Far cheaper to buy bulk silica gel in the form of the newly-marketed crystal cat litter, dump it in a sack (for instance, an old pillow case), and dry it out every month or two by sticking it the sun or an oven at 150-200 degrees for a few hours (make sure your sack is not a synthetic fabric if you take the latter route). The nice thing about this solution too is that if you get a spill, you can stick the sack of silica gel directly on it and it absorbs it within a minute or so. You can rinse off the sack and dry it in the same way as above. My wife picked up a 4lb sack of silica gel (this one) from WM for $4 dollars. 4lbs is considerably more silica than even the largest Evadry.

__________________
nobeerinheaven is offline
SeeMont Likes This 
Reply With Quote Quick reply to this message
Old 07-03-2014, 03:52 PM   #2
j1n
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
j1n's Avatar
Recipes 
 
Join Date: Mar 2014
Location: Northern, Virginia
Posts: 774
Liked 198 Times on 125 Posts
Likes Given: 99

Default

Interesting. I know people use this stuff to humidify their humidors for cigars. You are using it to dry the air not release moisture into it.

__________________
On Deck - Bells 2H Clone, Centennial Blonde Ale, Oktoberfest, Vienna Lager
Fermenting - Cottage House Saison, Dead Guy Clone
Kegged - Irish Red, Abbey Ale
On Tap - Amber Ale
Kicked - Leftovers Pale Ale, Centennial Blonde Ale
j1n is online now
 
Reply With Quote Quick reply to this message
Old 07-03-2014, 04:03 PM   #3
kh54s10
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: Tiverton, Rhode Island
Posts: 6,724
Liked 610 Times on 517 Posts
Likes Given: 165

Default

Quote:
Originally Posted by j1n View Post
Interesting. I know people use this stuff to humidify their humidors for cigars. You are using it to dry the air not release moisture into it.
It says in the description that it ABSORBS moisture. I don't know how someone would use it to humidify anything?!?!?
__________________
kh54s10 is offline
 
Reply With Quote Quick reply to this message
Old 07-03-2014, 04:16 PM   #4
j1n
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
j1n's Avatar
Recipes 
 
Join Date: Mar 2014
Location: Northern, Virginia
Posts: 774
Liked 198 Times on 125 Posts
Likes Given: 99

Default

Quote:
Originally Posted by kh54s10 View Post
It says in the description that it ABSORBS moisture. I don't know how someone would use it to humidify anything?!?!?
Well they do, and it works. The one the OP listed is in this thread on good kitty liter for humidors.

http://www.cigar.com/cs/forums/thread/660564.aspx

You spray it with RO water then you put it in your humidor and it releases moisture.
__________________
On Deck - Bells 2H Clone, Centennial Blonde Ale, Oktoberfest, Vienna Lager
Fermenting - Cottage House Saison, Dead Guy Clone
Kegged - Irish Red, Abbey Ale
On Tap - Amber Ale
Kicked - Leftovers Pale Ale, Centennial Blonde Ale
j1n is online now
 
Reply With Quote Quick reply to this message
Old 07-03-2014, 06:00 PM   #5
Stealthcruiser
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2013
Location: Atlanta, (Hampton)., Georgia
Posts: 1,426
Liked 120 Times on 108 Posts
Likes Given: 2148

Default

"Silica Gel" cat litter?
That's a new on on me!
It is usually "diatomaceous earth", like "speedi-dri" for absorbing oils spills, 'cept with a dust control agent, and sometimes a fragrance added.

Is it scented?.......( I clicked on the link, but nothing happened for me but a blank page!).


Edit: got it to work, sez it's "silica sand"...........Same stuff as silica gel?

__________________

Corned Beef............The other pink meat.

Stealthcruiser is offline
 
Reply With Quote Quick reply to this message
Old 07-03-2014, 07:39 PM   #6
nobeerinheaven
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: Lafayette, IN
Posts: 39
Liked 2 Times on 2 Posts
Likes Given: 5

Default

Silica sand is the same thing as silica gel. They deem it "sand" because cats don't like to walk on granules above a certain small size. Pure marketing. It's the same stuff. The reason it works to release moisture in a humidor is that it absorbs so very much. 1 lb silica gel absorbs .81 lbs fluid, according to the product description. Under low heat, it will have a lot of moisture to release over time. The eva dry is probably a quarter of a pound of silica gel, to compare.

Oh, and no the stuff I got was not scented as far as I could tell.

__________________
nobeerinheaven is offline
Stealthcruiser Likes This 
Reply With Quote Quick reply to this message
Old 07-03-2014, 09:53 PM   #7
day_trippr
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Stow, MA
Posts: 10,353
Liked 1238 Times on 998 Posts

Default

fwiw, the eva-dry 500 weighs roughly 28 ounces before the shrink wrap is breached, and will hold just over 5 ounces of water before it's pretty much loaded. I'm going to guess the silica gel weighs around 8 ounces...

Cheers!

__________________
day_trippr is offline
 
Reply With Quote Quick reply to this message
Old 07-07-2014, 03:25 PM   #8
MrFoodScientist
HBT_SUPPORTER.png
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2011
Location: Erie, PA
Posts: 518
Liked 30 Times on 28 Posts
Likes Given: 3

Default

You can also pick up silica gel from craft stores like Michaels or Hobby Lobby where they sell it for drying flowers. A bit pricier, though. We use it in our lab cooler at work in an open beaker. When we need to recharge it we microwave it for about 5 min.

Also I found this on some AR15 Forums:
"Here's the deal- most motorcycles are made in Japan, Yes? They are shipped to the U.S. in crates packed in "containers". These containers are of course exposed to saltwater air during transit as they simply sit stacked on a deck.

In order to ensure that they arrive without rust- these are new bikes- each one is "crated" with a dessicant bag about the size of a large tube sock. These are tossed at the dealership when the bikes are uncrated. A case of beer will get you in a month all the freaking dessicant- REAL dessicant you could ever use."

__________________

Find Recipes on my blog: The Homemade Soda Expert I'd love some feedback!
Now Available from Quarry Books -- Making Soda at Home: Mastering the Craft of Carbonation
Like on Facebook!, Follow on Twitter, Add to Goodreads

MrFoodScientist is offline
 
Reply With Quote Quick reply to this message
Old 07-08-2014, 10:38 AM   #9
ChefRex
HBT_LIFETIMESUPPORTER.png
Feedback Score: 3 reviews
 
ChefRex's Avatar
Recipes 
 
Join Date: Dec 2012
Location: Central, NJ
Posts: 3,698
Liked 1786 Times on 1116 Posts
Likes Given: 2940

Default

The cat litter works great, I made a tube last night with a hot glue gun and tossed it in, I had droplets on the walls of my fermentation chamber and this morning dry as a bone!
Thanks for the idea!

__________________
ChefRex is offline
Stealthcruiser Likes This 
Reply With Quote Quick reply to this message
Old 07-08-2014, 02:21 PM   #10
MichaelBrock
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
MichaelBrock's Avatar
Recipes 
 
Join Date: Jun 2011
Location: Alachua, FL
Posts: 441
Liked 20 Times on 18 Posts
Likes Given: 26

Default

I'll definitely have to try this. I have one of the smaller eva-dry units in each of my 5 cu ft fermenter freezers and they can't keep up. I'm thinking that a sock filled with the stuff and tied off might make a simple solution.

__________________
MichaelBrock is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keezer Moisture Problem Kozwald Bottling/Kegging 9 12-18-2013 07:47 PM
Best way to eliminate moisture in keezer n240sxguy DIY Projects 4 07-21-2013 03:42 AM
Moisture in my keezer after installing eva-dry 500 BWN Bottling/Kegging 18 04-30-2013 12:16 PM
moisture control in keezer Kershner_Ale Equipment/Sanitation 2 04-20-2010 04:51 PM
How do you control moisture in your keezer? Stevorino Bottling/Kegging 12 12-13-2008 02:45 PM