Electric Brewing Supply 30A BCS Giveaway - Last Chance to Enter!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Brewing for a wedding, first time kegging...pressure's on.
Reply
 
LinkBack Thread Tools
Old 02-10-2013, 03:13 PM   #1
JWest
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Altus, Oklahoma
Posts: 61
Liked 1 Times on 1 Posts
Likes Given: 1

Default Brewing for a wedding, first time kegging...pressure's on.

I am brewing three batches for a buddy's wedding at the end of March. The first batch has been in the fermenter for two weeks, and the next two are going to get brewed next weekend.

I have three five gallon corny kegs that I bought for this occasion (what a great excuse to get into kegging, right?). This will be my first time kegging. Here are my thoughts; I'm looking for feedback. I'd like to use corn sugar to carbonate all three, since I'll have to travel to another state with the kegs for the wedding, and I don't want to have them hooked up to CO2 the whole time. I am planning on putting all three in kegs when they're ready, then using the corn sugar to carb. I'll travel with the kegs, then hook them up to gas for the wedding. Does anyone see any issues with this? Any tips? Thanks!

__________________
JWest is offline
 
Reply With Quote Quick reply to this message
Old 02-10-2013, 05:05 PM   #2
zachattack
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2012
Location: , MA
Posts: 2,507
Liked 242 Times on 208 Posts
Likes Given: 130

Default

A couple issues:

1) Many corny keg lids won't seal fully unless you blast them with 20-30 psi to help set the seals. You might be OK if you use the oversize soft silicone o-rings and tons of keg lube, but it's still a risk. It's also usually a good idea to purge the headspace a couple times; can't do that without CO2. Since you'll be moving the kegs afterwards, oxidation is a possibility.

2) Proper keg priming is a little tricky. Most people add about half the priming sugar they would for bottles, but I think it might be difficult to nail a proper carb level your first time around.

3) If you move a naturally carbonated keg, you'll have a ton of sediment that'll get kicked up. I'd make sure to give them plenty of time to chill and let the sediment settle before the wedding. A couple days at least. You don't want to serve cloudy beer, and you want everything to be equilibrated temperature and CO2-wise.

4) There can be a lot to troubleshoot with any kegging setup (leaks, clogs, plumbing issues, line balancing issues, faucet troubles) and you're going to be under a lot of pressure to nail it this time. I'd get your system set up now so you can troubleshoot it. Unless you happen to be some type of research lab engineer and you do liquid/gas plumbing as part of your daily job, but even then you'll have a bunch to figure out.

__________________
zachattack is offline
JWest Likes This 
Reply With Quote Quick reply to this message
Old 02-10-2013, 05:39 PM   #3
lutherslagers
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Marshall, MI
Posts: 204
Liked 3 Times on 3 Posts
Likes Given: 5

Default

I brewed 8 cornies for a wedding that required me to travel through 6 states. A few thoughts:
1. Know the homebrew transportation laws in all states through which you'll travel.
2. If the kegs will be transported inside a vehicle lay tarps down.
3. I stored my kegs upright to avoid any leading through the lid or posts, so I used the big buckets with rope handles you see at hardware stores.
4. The wedding I did was in summer so I wanted to beer cold. I froze dozens of soda bottles full of water and then bought bags of ice along the way.
5. For clearer beer, jumper the beer from one keg to another before transportation. This will leave the sediment behind.
6. Have back ups of everything. I took an extra CO2 regulator, and extra CO2 tanks, Quick disconnects, picnic/cobra taps, etc.
7. Have time to setup and test for leaks. I also took a spray bottle of soap water for leak checking. I had a tool bag with everything I could need... o-rings, gas tape, plumbers tape, wrenches, keg lube, etc.
8. Enjoy all the kudos at the reception.

Here's some photos.

weddingtransport.jpg   weddingbeers.jpg  
__________________
Martin Luther -

"Whoever drinks beer he is quick to sleep; whoever sleeps long does not sin; whoever does not sin enters Heaven! Thus let us drink beer"

"At home I have good wine and beer and a beautiful wife"
lutherslagers is offline
 
Reply With Quote Quick reply to this message
Old 02-10-2013, 06:24 PM   #4
mjdonnelly68
Always drinking - never drunk.
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
mjdonnelly68's Avatar
Recipes 
 
Join Date: Oct 2011
Location: Glenmont, NY
Posts: 1,259
Liked 151 Times on 106 Posts
Likes Given: 182

Default

Beer looks great considering you kicked it up across six states. Kudos!

__________________

"I feel sorry for people who don't drink because when they get up in the morning, that's as good as they're gonna feel all day" - Francis Albert Sinatra

mjdonnelly68 is offline
 
Reply With Quote Quick reply to this message
Old 02-10-2013, 07:35 PM   #5
JWest
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Altus, Oklahoma
Posts: 61
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Wow, Luther...sweet setup. Thanks for the advice & the pics.

__________________
JWest is offline
 
Reply With Quote Quick reply to this message
Old 02-11-2013, 07:02 AM   #6
elpenoso
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Chico, Ca
Posts: 250
Liked 19 Times on 16 Posts
Likes Given: 8

Default

Why do you think you would need to have them hooked up to the co2 tank while traveling??

__________________
elpenoso is offline
 
Reply With Quote Quick reply to this message
Old 02-11-2013, 12:22 PM   #7
raouliii
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
raouliii's Avatar
Recipes 
 
Join Date: Aug 2011
Location: Ponchatoula, LA
Posts: 789
Liked 64 Times on 57 Posts
Likes Given: 107

Default

Quote:
Originally Posted by lutherslagers View Post
...1. Know the homebrew transportation laws in all states through which you'll travel......
Oklahoma Law: "The Alcoholic Beverage Laws Enforcement Commission is authorized to issue, upon application of a person who is twenty-one (21) years of age or older, an annual personal use permit which when granted authorizes the holder thereof to make, store, possess and transport for personal use, ...., beer as defined by Section 506 of this title......" from Oklahoma Homebrew Laws. Make sure you have your permit with you during transport, just in case.
__________________
On Tap:
NippleRub Ultra
ReaRranger IPA
Big Breasted Blonde
Rochefort 7

In the Chamber:
NippleRub Honey Ultra - new recipe with less flavor/body/etc but added rice solids and honey malt

Next Up:
An Amber of some sort
raouliii is online now
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
First time kegging, lost all pressure PolloLoco Bottling/Kegging 4 06-13-2012 11:57 AM
First Time Kegging For First (& Only) Time Wedding SevenSeaScourge Bottling/Kegging 14 02-20-2011 05:02 PM
Kegging for the 1st time....for my wedding ryno99 Bottling/Kegging 6 10-14-2010 04:01 AM
Kegging, Pressure/Temp/Time question jonbrout Bottling/Kegging 8 04-30-2009 05:09 AM
Pressure sealing/purging at kegging time JuanKenobi Bottling/Kegging 2 03-04-2009 07:45 PM