Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Bottling Temperature Question and Priming




Reply
 
LinkBack Thread Tools Display Modes
Old 01-26-2011, 10:19 PM   #1
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2009
Location: Grand Rapids, MI, Michigan
Posts: 17
Default Bottling Temperature Question and Priming

A couple questions for those more experienced than myself:

- I bottled my Chinook IPA and put the bottles in the basement, problem it is winter in Michigan and only 50F in my basement. I have no other way to heat it up as upstairs it is already 70F, plenty warm. I've considered a portable heater to place near the bottles but I don't want to spend a fortune in electricity to keep bottles warm.

I've also tried moving them upstairs but if I have a bottle bomb, my wife might ban me from brewing if I screw up a bathroom or worse yet spare bedroom with beer and glass shrapnel. Has anybody had a bottle bomb go off in a Rubbermaid bin, would it contain the mess or blow right through it? Or am I find bottle conditioning at 50F, I assume that won't work as the yeast go dormant.

- I brewed a Chinook IPA extract kit from northern brewing, it didn't mention how much priming sugar to use per 5gal batch. I used 5oz, going with the 1oz per gallon recommendation I've seen in the forums. I know there are calculators for this but I can't seem to find that style in the calculators to determine the amount of priming sugar to use.


__________________
-EG-
egrimmer is offline
 
Reply With Quote Quick reply to this message
Old 01-26-2011, 10:22 PM   #2
Frau Administrator
Feedback Score: 0 reviews
 
Yooper's Avatar
Recipes 
 
Join Date: Jun 2006
Location: Upper Michigan
Posts: 51,590
Liked 1925 Times on 1482 Posts
Likes Given: 87

Default

One ounce of priming sugar per gallon is a good amount- that sounds fine.

If fermentation was finished when you bottled, you won't have bottle bombs. I never have had one in all these years.

A rubbermaid container is a great idea. That will be good "insurance" so that your wife won't have a problem with the bottles upstairs.

You're right- it'll never carb up at 50 degrees. They need to be 68-70 degrees ideally, but they might carb up at 64-65 albeit slowly. At 50, the yeast will be pretty sluggish.


__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006
Yooper is offline
egrimmer Likes This 
Reply With Quote Quick reply to this message
Old 01-26-2011, 10:27 PM   #3
Senior Member
Feedback Score: 0 reviews
 
Hammy71's Avatar
Recipes 
 
Join Date: Sep 2008
Location: Colora, Maryland
Posts: 4,851
Liked 210 Times on 175 Posts
Likes Given: 178

Default

5 oz seems like a little more than I would use. But, regardless you have to raise the temperature of the bottles if you want them to carb properly. Shake them and put them in a rubbermaid container with a lid. Put in the a closet with some books on top and forget about them for a month.

A great Carb calculator (that has IPA on it.)

http://www.tastybrew.com/calculators/priming.html
Hammy71 is offline
egrimmer Likes This 
Reply With Quote Quick reply to this message
Old 01-26-2011, 10:30 PM   #4
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2009
Location: Grand Rapids, MI, Michigan
Posts: 17
Default

Thanks for easing my mind, I think I'll do the bins for now in a spare bedroom and call it good. I wasn't aware the bottle bombs were caused by bottling too soon. I thought it was from over priming, which I suppose both could happen but it sounds like the 5oz is fine as you said.

I'm more confident knowing my fermentation was complete based on hydrometer reading. I wish my new house didn't have an unfinished and poorly heated basement! Not great for brewing in Michigan, there is only one vent down there and it is always 20 degree's cooler than the upstairs levels.

thanks again
__________________
-EG-
egrimmer is offline
 
Reply With Quote Quick reply to this message
Old 01-26-2011, 10:46 PM   #5
Frau Administrator
Feedback Score: 0 reviews
 
Yooper's Avatar
Recipes 
 
Join Date: Jun 2006
Location: Upper Michigan
Posts: 51,590
Liked 1925 Times on 1482 Posts
Likes Given: 87

Default

Quote:
Originally Posted by egrimmer View Post
Thanks for easing my mind, I think I'll do the bins for now in a spare bedroom and call it good. I wasn't aware the bottle bombs were caused by bottling too soon. I thought it was from over priming, which I suppose both could happen but it sounds like the 5oz is fine as you said.

I'm more confident knowing my fermentation was complete based on hydrometer reading. I wish my new house didn't have an unfinished and poorly heated basement! Not great for brewing in Michigan, there is only one vent down there and it is always 20 degree's cooler than the upstairs levels.

thanks again
It sounds like you can be a winter lager brewer! And, you'll have great fermentation temperatures in the summer if you can keep that area in the 60s.


__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006
Yooper is offline
 
Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Priming temperature thatsus02 Bottling/Kegging 1 11-06-2010 04:14 AM
Question about priming before bottling brewd00d Bottling/Kegging 9 10-09-2010 07:02 PM
Bottling Various Sizes - Question about priming sugar keelanfish Bottling/Kegging 2 12-03-2008 06:49 PM
kegging and bottling priming sugar question TwoHeadsBrewing Bottling/Kegging 5 09-17-2008 05:56 PM
Bottling and priming question tdionne Bottling/Kegging 3 09-06-2008 11:30 PM



FOLLOW US ON