Advertise Here
Main · BrewSpace · Recipes · Wiki · Groups · Clubs · Gallery · Reviews · Video · Blogs · Store

Memorial Day False Bottom Free ShippingFREE Shipping!!!$69.99 Brand new 2.5 Gallon Keg Pre-Order
Go Back   Home Brew Forums > Home Brewing Beer > Bottling/Kegging



Reply
 
LinkBack Thread Tools Display Modes
Old 02-06-2012, 03:33 AM   #1
Trouble
 
Roamer's Avatar
Recipes 
 
Join Date: Dec 2010
Location: Denver, Colorado
Posts: 5
Default bottled an IIPA without adding yeast

I did my first high gravity beer a couple months ago (a Boulder Brewery Mojo Risin IIPA clone) and bottled about 3 weeks ago. The beer should be around 10% alcohol and ended with a SG of about 1.030. The beer was in the secondary for about 3 weeks before I bottled.

I totally spaced adding any yeast at bottling and when I opened a beer the other day I was disappointed to find only a very small amount of carbonation. I thought about it for a moment and realized what an idiot I was and that with the high alcohol, the yeast would probably have a hard time kicking into gear again to turn the bottling sugar into the much needed carbonation!

So what should I do now? If I let it sit long enough on the bottles (and try to keep it warm... though it is hard to keep it much above 68 F in the winter in my house) is it likely to carbonate?

Can I use this as an excuse to start kegging and carefully empty all my bottles into a keg to carbonate?

I would hate to loose this batch as I am really looking forward to it and think once it carbonates it will be exactly what I was trying to make. Any help would be appreciated!


Roamer is offline Reply With Quote
Old 02-06-2012, 03:36 AM   #2
← Huge Member →
 
passedpawn's Avatar
Recipes 
 
Join Date: Apr 2009
Location: ☼ Clearwater, FL ☼
Posts: 9,699
Default

Let it go. Get it to the warmest place in your house. A IIPA shouldn't need additional yeast. I'll bet you come back and post here in another week or two that all is well.


[10%! That's a pretty strong IIPA. I see your point, but I think it will carbonate)
__________________
Nag Champa FTW. Mmmm.
passedpawn is offline Reply With Quote
Old 02-06-2012, 03:38 AM   #3
Go Gadget Go!
 
mccumath's Avatar
Recipes 
 
Join Date: Dec 2010
Location: Idaho
Posts: 570
Default

3 weeks may not be enough time for your beer to carbonate. May already know this, but make sure your bottles are in a warm, room temperature area (66-68 degrees or so), and let them sit for a couple more weeks. If they are mildly carbonated now, they will carb up to where you are expecting. Some beers take longer than others.

Hope this helps!
__________________
Put it all in the primary, and let the BeerGods sort it out
Keggle Conversion
mccumath is offline Reply With Quote
Old 02-06-2012, 03:52 AM   #4
Trouble
 
Roamer's Avatar
Recipes 
 
Join Date: Dec 2010
Location: Denver, Colorado
Posts: 5
Default Great!

Thanks for the quick response! If it is likely to carbonate, I have no problem waiting.

I am a little disappointed not to have a good excuse to start kegging... but it leaves more $ for transitioning to all grain
Roamer is offline Reply With Quote
Old 02-06-2012, 12:21 PM   #5
Senior Member
 
greenbirds's Avatar
Recipes 
 
Join Date: May 2008
Posts: 416
Default

What yeast did you use? Like others said, they should carb up. Put them in your closet with the water heater, around a heating vent (maybe in an insulated cooler/box so the temp doesn't swing up and down), near the refrigerator coils, etc.. Getting them up above 70 F often gets things moving. But I imagine they will eventually get there regardless.
greenbirds is offline Reply With Quote
Old 02-13-2012, 01:48 AM   #6
Trouble
 
Roamer's Avatar
Recipes 
 
Join Date: Dec 2010
Location: Denver, Colorado
Posts: 5
Default

The beer yeast is American Ale II from Wyeast. I put a towel under my fermenting room door (the water heater closet) and the temperature is staying in the low 70's now. I opened another bottle yesterday and it had a little more carbination than the one I opened a week ago, so I am hopefull it wil be ready in the next couple weeks.

Thank you again for the replies... I will post again once it comes up to a normal carbination just to give others an idea of how long it took!
Roamer is offline Reply With Quote
Old 02-13-2012, 10:28 AM   #7
Senior Member
Recipes 
 
Join Date: Nov 2011
Location: Plymouth, MA
Posts: 806
Default

I did a 9.5% a few months ago that took well over 6 weeks to carb. Still got two left, but I cracked one open Friday night that hardly carbed at all. Better safe than sorry, wait it out at the cost of some of your hoppy aroma
Calichusetts is offline Reply With Quote
Old 03-27-2012, 01:49 AM   #8
Trouble
 
Roamer's Avatar
Recipes 
 
Join Date: Dec 2010
Location: Denver, Colorado
Posts: 5
Default going on 10 weeks now

Still very little carbonation... hard to say if it is getting any more now or not. I am starting to consider alternatives such as dumping it all out and kegging (would require investment in kegging equipment). I have been pretty active lately with brewing and have a good stock of beer on hand... so I will just give it more time... for now.
Roamer is offline Reply With Quote
Old 03-27-2012, 02:27 AM   #9
You can't be serious
 
bottlebomber's Avatar
Recipes 
 
Join Date: Apr 2011
Location: ukiah, CA
Posts: 5,317
Default

More time isn't going to help it at this point according to my experience. If it isn't carbonated after 6 weeks it may not at all. The yeast in there aren't getting any stronger. You can either drink it like a man and chalk it up as a learning experience as I've had to do, or sanitize the bottles, open them, and use a turkey baster full of hydrated yeast to inoculate the bottles - as I've also had to do.


bottlebomber is offline Reply With Quote
Reply
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Adding yeast after racking zempelk Bottling/Kegging 1 04-02-2011 06:00 PM
Adding yeast bottling. how? GregoryShmegory Bottling/Kegging 1 12-16-2009 12:22 AM
Adding Bottled Beer to Tap=a=Draft mhot55 Bottling/Kegging 1 08-02-2009 03:41 AM
adding yeast at bottling killian Bottling/Kegging 0 06-15-2009 02:03 AM
Adding Yeast DragonTail Bottling/Kegging 4 09-25-2005 02:24 AM





Contact Us - Top - Privacy - All times are GMT. The time now is 01:47 PM.
Copyright © Group Builder, Inc - All Rights Reserved
Craft Beer & Brewery Forum