Happy HolidaySs Giveaway - Last Sponsor Giveaway of the Year!

Come Enter the BrewDeals/FastFerment Giveaway!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > A begginer Kegging problem
Reply
 
LinkBack Thread Tools
Old 08-09-2007, 07:29 PM   #1
strangecarr
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2007
Location: Chiswick, London, UK
Posts: 50
Default A begginer Kegging problem

Hi there,

This is my first - I have recently discovered the joys of homebrewing, even though I haven't done my first brew yet!

I have a question;

I siphoned my brew from my fermenting bin into a pressurised keg (King Keg top tap). The brew didn't fill the keg to the top, I thought it should have because it was five gallons; although there was a bit left at the bottom of the bin and I wasted some by taking hydrometer readings.

I tasted the brew from the keg after it had been conditioning for about a week and it didn't taste like the same beer that I have purchased directly form the brewery. It looked good, smelt ok, but didn't taste that good. I'm thinking that the oxygen left at the top of the king keg may have interfered with the conditioning.

Am I being paranoid, do you think the beer will taste better if I leave it for longer? I thought the conditioning was just about getting some CO2 into the beer and letting th sediment settle.

Any thought?

__________________
strangecarr is offline
 
Reply With Quote Quick reply to this message
Old 08-10-2007, 12:23 AM   #2
david_42
Feedback Score: 0 reviews
 
david_42's Avatar
Recipes 
 
Join Date: Oct 2005
Location: Willamina & Oak Grove, Oregon, USA
Posts: 25,656
Liked 137 Times on 130 Posts

Default

CO2 comes out of solution when you rack, so oxygen isn't a problem. Give it another 3-4 weeks.

__________________

Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

david_42 is offline
 
Reply With Quote Quick reply to this message
Old 08-10-2007, 02:04 AM   #3
malkore
Feedback Score: 0 reviews
 
malkore's Avatar
Recipes 
 
Join Date: Jun 2007
Location: Nebraska
Posts: 6,922
Liked 33 Times on 31 Posts
Likes Given: 9

Default

you have the keg hooked up to CO2 now right? (i'm not familiar with King Keg)

__________________
Malkore
Primary: English Mild
On tap: Pale Ale, Lancelot's Wheat, English Brown Ale, Steam Beer, HoovNuts IPA
Bottled: MOAM, Braggot, Raspberry Melomel, Merlot, Apfelwein, Pyment, Sweet mead, Cabernet
Gal in 2009: 27, Gal in 2010: 34, Gal in 2011: 13, Gal in 2012: 10
malkore is offline
 
Reply With Quote Quick reply to this message
Old 08-10-2007, 09:13 AM   #4
strangecarr
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2007
Location: Chiswick, London, UK
Posts: 50
Default

I don't have any CO2 hooked up to it, only what is being produced from the fermentation of the priming sugar. I'm just worried about the gap at the top...and any oxygen that might have been there that could have caused some oxidation to cause a strange taste.

Does conditioning actually improve the flavour significantly, or is it just about the clarity?

Cheers,

__________________
strangecarr is offline
 
Reply With Quote Quick reply to this message
Old 08-10-2007, 02:36 PM   #5
abracadabra
Feedback Score: 0 reviews
 
abracadabra's Avatar
Recipes 
 
Join Date: Dec 2006
Location: Newnan, Georgia
Posts: 1,925
Liked 6 Times on 6 Posts

Default

Conditioning does improve the taste. Don't worry to much about the head space as the CO2 will form a protective layer. Just don't shake it up and you should be OK.

__________________
Do what you like!
Brew what you like!
abracadabra is offline
 
Reply With Quote Quick reply to this message
Old 08-10-2007, 02:54 PM   #6
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,198
Liked 1042 Times on 696 Posts
Likes Given: 28

Default

Conditioning is all about flavor. If you're looking for a cleaner, less yeasty flavor, you might consider using tank co2 for carbonation instead of priming sugar in the future.

__________________
BrewHardware.com has a new website. Please check it out and let me know what you think!
New 100% Stainless Steel Heating Elements are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc. Did you know we are also now a full service homebrew shop selling malt, hops, yeast (Wyeast), etc?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 08-10-2007, 03:07 PM   #7
strangecarr
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2007
Location: Chiswick, London, UK
Posts: 50
Default

Hi,

Thanks for the replies, after reading some threads in the beginners section, I think I should RELAX!

__________________
strangecarr is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
I can see where kegging could be a problem BierMuncher General Beer Discussion 19 01-02-2011 04:29 PM
Newbies kegging problem Pivzavod Bottling/Kegging 5 11-04-2009 01:26 AM
new to kegging and a problem briand97 Bottling/Kegging 11 12-06-2008 08:15 PM
VERY serious kegging problem NEED HELP! Slipgate Bottling/Kegging 11 12-02-2008 10:35 PM
kegging problem NateKerx Bottling/Kegging 4 07-04-2008 08:40 PM



Newest Threads

LATEST SPONSOR DEALS