Spike Brewing 12.5 Conical Fermenter Giveaway!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > anyone have air in their lines?

Reply
 
LinkBack Thread Tools
Old 03-03-2012, 06:32 AM   #1
somedudefromguam
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Albany, Oregon
Posts: 149
Liked 13 Times on 9 Posts
Likes Given: 53

Default anyone have air in their lines?

Have you ever experienced co2 pockets in your keg lines? I keep my lines coiled and hanging, so co2 bubbles up and creates pockets in the line and the next pour ends up foamy. Solutions??? I wonder what bigger breweries do...

__________________
somedudefromguam is offline
 
Reply With Quote Quick reply to this message
Old 03-03-2012, 08:01 AM   #2
FarmBoy530
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: AUburn, Ca
Posts: 210
Liked 4 Times on 4 Posts
Likes Given: 4

Default

I have worked in a "bigger brewery" and you shouldn't have air in your lines. When co2 puts head pressure on your keg beer comes out the dip tube. co2 doesn't push through the beer into the line. Check your tubing connections and make sure you have tightened hose clamps on all of em. To me it sounds like you have an air leak.

__________________
FarmBoy530 is offline
 
Reply With Quote Quick reply to this message
Old 03-03-2012, 12:20 PM   #3
rausched
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: , Indiana
Posts: 21
Default

I have two kegs that do this exact thing, rest of my kegs pour fine; I've tried new gaskets, switching dip tubes/lids, longer beer lines; sprayed star san all over the lid looking for bubbles from leaks and can't find anything. Hopefully someone on here can help.

__________________
rausched is offline
 
Reply With Quote Quick reply to this message
Old 03-03-2012, 12:44 PM   #4
day_trippr
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Stow, MA
Posts: 9,826
Liked 1125 Times on 913 Posts

Default

Quote:
Originally Posted by rausched View Post
I have two kegs that do this exact thing, rest of my kegs pour fine; I've tried new gaskets, switching dip tubes/lids, longer beer lines; sprayed star san all over the lid looking for bubbles from leaks and can't find anything. Hopefully someone on here can help.
I would focus on the Out dip tube and its o-ring, because gas getting into the beer line would have to either be sneaking around the o-ring at the dip tube flange, or entering through a pin hole or crack in the tube above the beer line...

Cheers!
__________________
day_trippr is offline
 
Reply With Quote Quick reply to this message
Old 03-03-2012, 12:49 PM   #5
thargrav
Registered User
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Huntsville, Alabama
Posts: 821
Liked 38 Times on 35 Posts
Likes Given: 2

Default

Air isn't getting in, CO2 is coming out of suspension. And this almost always means that your beer is over carbonated or your serving pressure is too low.

__________________
thargrav is offline
somedudefromguam Likes This 
Reply With Quote Quick reply to this message
Old 03-03-2012, 01:23 PM   #6
badbrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: l.a., ca
Posts: 1,372
Liked 11 Times on 11 Posts
Likes Given: 1

Default

Quote:
Originally Posted by thargrav View Post
Air isn't getting in, CO2 is coming out of suspension. And this almost always means that your beer is over carbonated or your serving pressure is too low.
LOL this^^^I have one keg that does that. I force carbed it at 30 psi before connecting to the manifold. No big deal. Just unplug the gas and leave the relief valve open for a few minutes and gas back up. There is too much co2 in the beer compared to the regulator pressure.
__________________
badbrew is offline
 
Reply With Quote Quick reply to this message
Old 03-03-2012, 02:38 PM   #7
bucfanmike
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
bucfanmike's Avatar
Recipes 
 
Join Date: Apr 2010
Location: Duluth
Posts: 1,012
Liked 21 Times on 20 Posts
Likes Given: 3

Default

this also happens when you have temperature stratification. If air is moving in whatever you are using as a fridge the lower in the box the colder it is. Cold Beer comes from the bottom of the keg and as it sits in the warmer hose the co2 can break out of solution. Mine used to do this until i built a small fan to move cold air around.

__________________

Mike in Duluth

Currently on Tap
1. Hefeweizen
2. BM Centennial Blonde
3. LHMS Clone

Pipeline
Next on Tap-Denny Conn Rye IPA
Kegged and aging Ed Worts Apfelwine, Denny Conn BVIP
Fermenters -

bucfanmike is offline
 
Reply With Quote Quick reply to this message
Old 03-03-2012, 02:58 PM   #8
JRems
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: Mahopac, NY
Posts: 2,229
Liked 58 Times on 50 Posts
Likes Given: 9

Default

If you overcarbed your keg, then lowered the psi to pour better, the co2 will come out of suspension in your line. To test if this is the problem, Jack your pressure up 10 extra psi, pour 6 or so ounces then watch the lines. If in a few minutes no bubbles form, the keg was overcarbed. To fix just unhook the keg and burp the pressure over a couple days.
The other possibility is there is crap builtup in the line and giving the co2 nucleation sites to come out of suspension.

__________________
JRems is offline
 
Reply With Quote Quick reply to this message
Old 03-03-2012, 02:59 PM   #9
thargrav
Registered User
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Huntsville, Alabama
Posts: 821
Liked 38 Times on 35 Posts
Likes Given: 2

Default

Every kegerator with a beer tower has this problem until you install some sort of beer tower cooler in the tower.

__________________
thargrav is offline
 
Reply With Quote Quick reply to this message
Old 03-03-2012, 06:47 PM   #10
somedudefromguam
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Albany, Oregon
Posts: 149
Liked 13 Times on 9 Posts
Likes Given: 53

Default

Quote:
Originally Posted by thargrav View Post
Air isn't getting in, CO2 is coming out of suspension. And this almost always means that your beer is over carbonated or your serving pressure is too low.
Ok! Sounds like this could be my problem... I have a couple brews now that I serve around 3.1 volumes. I have to lower my pressure to serve because I have been experiencing excessive foam when I try to balance the system properly. I used 25' of line once and the flow rate was OK, but it still came out foamy.
Thanks for the advice!
__________________
somedudefromguam is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
10' lines chriscraig Bottling/Kegging 15 01-26-2012 10:46 PM
Keg Lines Petho Bottling/Kegging 4 12-12-2011 06:32 PM
gas lines houndhome1 Bottling/Kegging 3 03-17-2008 09:57 PM
Keg lines ArroganceFan Bottling/Kegging 6 09-18-2007 01:39 AM
CO2 lines FSR402 Bottling/Kegging 11 08-03-2007 03:20 PM