Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Another Danby Kegerator conversion
Reply
 
LinkBack Thread Tools
Old 07-10-2013, 02:45 PM   #1
Bowtiebrewery
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2009
Location: Seymour, CT
Posts: 553
Liked 3 Times on 3 Posts

Default Another Danby Kegerator conversion

OK,
So here are only a few photos but.... I haven't yet been able to get back into brewing but wanted to have some great brews on tap. I bought a Danby 4.4cuft "Spotless" finish mini-fridge and have it sunk and elevated into my wall:


I still have to re-paint the trim and do a few things there, but. I then proceeded to pass the gas line through the compressor hump and into the cavity below the fridge, as my tank is located in a room behind the fridge location. I also wanted to try and maintain the liner on the door as it is glued on. Inside is a 1/6th barrel keg to the left side. It does fit without taking off the liner.


You can see that I actually have the shank through the door instead out of the top... I also am able to still store beer on the door which is nice since I do have an small collection of 120min IPA.

Here is the front:



As you can see I did not center the tap, and for all you symmetry nuts, don't go nuts... but I wanted to do something that was clean and represented the functionality of this kegerator...

I would highly recommend purchasing this min-fridge as it gets quite cold, and is very quiet and energy efficient.

__________________
Bowtiebrewery is offline
 
Reply With Quote Quick reply to this message
Old 07-11-2013, 01:05 PM   #2
Calico Jack
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2007
Location: Medford, MA
Posts: 178
Liked 1 Times on 1 Posts
Likes Given: 2

Default

Looking good--i like it recessed into the wall.

__________________

Don't try and church it up boy.

Calico Jack is offline
 
Reply With Quote Quick reply to this message
Old 07-22-2013, 07:18 PM   #3
Bowtiebrewery
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2009
Location: Seymour, CT
Posts: 553
Liked 3 Times on 3 Posts

Default

Thanks for the compliment... My old one was a Glass door BeverageAir but that thing just sucked way too much power and I couldnt see chopping it up to put a faucet in the wall through it.

__________________
Bowtiebrewery is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Kegerator Conversion with Danby DAR440BL? GloHoppa DIY Projects 178 10-07-2014 01:53 AM
Kegerator Conversion with Danby DAR440BL Trackblock DIY Projects 16 02-13-2014 02:13 PM
Kegerator Conversion - DANBY 440BL hvrtaxi DIY Projects 15 01-06-2014 04:58 PM
Danby DAR452W Conversion? bspring18 DIY Projects 2 09-12-2012 03:25 PM
Danby fridge for conversion neo82087 Bottling/Kegging 3 11-09-2007 05:26 AM