Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Bottling/Kegging (http://www.homebrewtalk.com/f35/)
-   -   3/16" OK to use for gas dispensing? (http://www.homebrewtalk.com/f35/3-16-ok-use-gas-dispensing-122173/)

bighandsray 06-03-2009 03:26 AM

3/16" OK to use for gas dispensing?
 
Is there any reason not to use 3/16" tubing for gas as well as beer dispensing?
Most of what I read says to use 5/16" or 1/4" for the gas. Thanks for the help.

wilserbrewer 06-03-2009 03:29 AM

I would think the 3/16 is absolutely fine for gas line.

Boulderbrewer 06-03-2009 03:30 AM

If you have extra 3/16 use that. There is very little difference in the 3/16 and 1/4 for gas supply.

z987k 06-03-2009 03:32 AM

the barbed ends on all the connectors are 3/8 I believe. You have to push real hard to get 1/4 thin wall on, I think 3/16 thick wall would be a pita. Other than that, no. Of course of goes on the beer lines fine so...

homebrewer_99 06-03-2009 03:33 AM

To echo the others...3/16 works great because you only need one size of tubing...;)

bighandsray 06-03-2009 03:43 AM

Thanks. Just what I wanted to hear. I'm just getting the the whole kegging thing going and there are a lot of questions. HBT is amazing. Thanks again.

homebrewer_99 06-03-2009 03:47 AM

You're welcome.

BTW, I've been through Chadds Ford...though many years ago. (I'm originally from Jersey, but also lived in Philly)...


All times are GMT. The time now is 11:33 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.