Spike Brewing 12.5 Conical Fermenter Giveaway!

Home Brew Forums > Wine, Mead, Cider, Sake & Soda > Cider Forum > Kegging My first Cider

Reply
 
LinkBack Thread Tools
Old 02-13-2013, 10:19 PM   #1
jonurban
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
jonurban's Avatar
Recipes 
 
Join Date: Feb 2013
Location: Chicago, IL
Posts: 29
Liked 1 Times on 1 Posts

Default Kegging My first Cider

Hello All,

I'm kegging my first cider tonight or tomorrow (started the batch 1/26/13) and I'm very excited... For those of you who have kegged cider before, any tips or ticks you'd suggest.

I'd like a little carbonation to the cider, should I push the PSI to 30lbs and leave the CO2 tank on the keg, or can i get the PSI to 30lbs, leave it for an hour and take it of the CO2 until we're ready to drink it?

How long do you think it'll last in the keg? Do i need to pasteurize the corney keg after putting the cider in?

__________________
jonurban is offline
 
Reply With Quote Quick reply to this message
Old 02-14-2013, 01:14 AM   #2
b-boy
16%er
HBT_LIFETIMESUPPORTER.png
Feedback Score: 5 reviews
 
b-boy's Avatar
Recipes 
 
Join Date: Jun 2011
Location: GETZVILLE, NY
Posts: 2,335
Liked 401 Times on 295 Posts
Likes Given: 117

Default

I'd keg the cider, push the PSI to 30lbs to seal the keg, and let it keg condition for a few more weeks/months. When you're ready to drink, pop it in your kegarator, chill it, set your CO2 to serving pressure and let it carb up for a week or so. Should be good to drink after that.

Did you back-sweeten the cider with anything? If not, and the fermentation was complete, you shouldn't have to pasteurize anything.

__________________

Never underestimate the potential of someone who refuses to act their age.

b-boy is offline
 
Reply With Quote Quick reply to this message
Old 02-16-2013, 11:37 PM   #3
jonurban
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
jonurban's Avatar
Recipes 
 
Join Date: Feb 2013
Location: Chicago, IL
Posts: 29
Liked 1 Times on 1 Posts

Default

Thanks for the advice, I put it up to 30 psi, now I'll let it sit for a few weeks. I didn't back-sweeten and fermentation was complete.

I'll let you know how it tastes in March.

Thanks.

__________________

---
We are the music makers, and the dreamers of the dreams.

http://www.souralegroup.com

jonurban is offline
 
Reply With Quote Quick reply to this message
Old 03-02-2013, 08:43 PM   #4
jonurban
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
jonurban's Avatar
Recipes 
 
Join Date: Feb 2013
Location: Chicago, IL
Posts: 29
Liked 1 Times on 1 Posts

Default Follow up

Just to let you know, my Cider is properly carbed, and very dry and tasty.

__________________
jonurban is offline
 
Reply With Quote Quick reply to this message
Old 03-02-2013, 09:33 PM   #5
BadgerBrigade
Feedback Score: 1 reviews
Recipes 
 
Join Date: Dec 2011
Location: Monterey, Ca
Posts: 951
Liked 46 Times on 42 Posts

Default

Quote:
Originally Posted by jonurban
Just to let you know, my Cider is properly carbed, and very dry and tasty.
NICE! I plan to do my first Kegging soon, hope I'm successful...
__________________
Carboy1: Hopped Cider
Carboy2: Pear
Carboy3: Seasonal Cider
Bottled: Cream Soda
Still On Deck: Graff Cider
BadgerBrigade is offline
 
Reply With Quote Quick reply to this message
Old 03-05-2013, 01:10 AM   #6
jonurban
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
jonurban's Avatar
Recipes 
 
Join Date: Feb 2013
Location: Chicago, IL
Posts: 29
Liked 1 Times on 1 Posts

Default

Badger, I see you have a Pear in your secondary, how'd you do it... also how did you get the cedar in your apple cedar cherry?

__________________
jonurban is offline
 
Reply With Quote Quick reply to this message
Old 03-05-2013, 08:29 PM   #7
MrFinstad
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 33
Liked 2 Times on 2 Posts

Default

I keg lots of cider and I always recommend the low and slow method. That is, let it sit at about 40F for six days on 10psi. This gives a little less than 2 volumes of carbonation.

While jacking up the pressure really high to 30psi works, it isn't very consistent. If you can manage to wait a week for the low and slow approach, it will be perfect every single time.

Force carbonating cider is the same as force carbonating beer, so you can use a force carbonation chart to figure out how much pressure to apply given the temperature of your beer.

__________________
MrFinstad is offline
 
Reply With Quote Quick reply to this message
Old 03-05-2013, 09:35 PM   #8
BadgerBrigade
Feedback Score: 1 reviews
Recipes 
 
Join Date: Dec 2011
Location: Monterey, Ca
Posts: 951
Liked 46 Times on 42 Posts

Default

Quote:
Originally Posted by MrFinstad
I keg lots of cider and I always recommend the low and slow method. That is, let it sit at about 40F for six days on 10psi. This gives a little less than 2 volumes of carbonation.

While jacking up the pressure really high to 30psi works, it isn't very consistent. If you can manage to wait a week for the low and slow approach, it will be perfect every single time.

Force carbonating cider is the same as force carbonating beer, so you can use a force carbonation chart to figure out how much pressure to apply given the temperature of your beer.
Can you explain how to use the chart? If my cider is at 40°F and I want 2.3 volumes it says 10PSI? It does not mention time?
And you said 30psi. I think I need some carbonation schooling here
__________________
Carboy1: Hopped Cider
Carboy2: Pear
Carboy3: Seasonal Cider
Bottled: Cream Soda
Still On Deck: Graff Cider
BadgerBrigade is offline
 
Reply With Quote Quick reply to this message
Old 03-06-2013, 12:58 AM   #9
jonurban
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
jonurban's Avatar
Recipes 
 
Join Date: Feb 2013
Location: Chicago, IL
Posts: 29
Liked 1 Times on 1 Posts

Default

I heard the slow carb charts are over a 3-5 day period.

Using the Keg Carbonation Chart

The Slow Forced Carbonation Chart Below features a graph that uses pressure vs. temperature. The interior numbers of the chart refer to the Volumes of CO2

that will be present in your beer after carbonating.

Figure out what style of beer you will be force carbonating.
Figure out what temperature your keg will be at while carbonating.
Find where the color (style of beer) and temperature meet on the chart. This should be your desired force carbonation pressure.
Note: Depending on your beer, you may notice that you are able to chose from a range of pressures. This is where you can take the liberty to add in your own personal preference; If you prefer a beer with a little more carbonation, go towards the high end of what the chart is telling you. And on the other hand, if you prefer a less carbonated ale, set your pressure on the lower end.

__________________
jonurban is offline
 
Reply With Quote Quick reply to this message
Old 03-06-2013, 01:08 AM   #10
BadgerBrigade
Feedback Score: 1 reviews
Recipes 
 
Join Date: Dec 2011
Location: Monterey, Ca
Posts: 951
Liked 46 Times on 42 Posts

Default

Quote:
Originally Posted by jonurban
I got this from blog.******:

Using the Keg Carbonation Chart

The Slow Forced Carbonation Chart Below features a graph that uses pressure vs. temperature. The interior numbers of the chart refer to the Volumes of CO2

that will be present in your beer after carbonating.

Figure out what style of beer you will be force carbonating.
Figure out what temperature your keg will be at while carbonating.
Find where the color (style of beer) and temperature meet on the chart. This should be your desired force carbonation pressure.
Note: Depending on your beer, you may notice that you are able to chose from a range of pressures. This is where you can take the liberty to add in your own personal preference; If you prefer a beer with a little more carbonation, go towards the high end of what the chart is telling you. And on the other hand, if you prefer a less carbonated ale, set your pressure on the lower end.
I got that.... I am just stuck on trying to figure out how long to do this for to get the desired effect?
Again, I see the PSI and I see the temperature in degrees Fahrenheit but I do not see a time associated with this process. My question is about time.
At 40°F and 2.3 volumes of CO2 the correct psi says 10.... But how long?

Am I supposed to force carbonate at say 30 PSI and then turn the CO2 regulator down once it's finished to say 10 PSI to hold the 2.3 volume?

Let's start over.... I will give a scenario and maybe you can tell me how to force carbonate and then set the pressure to where I want:

Say you're putting 3 gallons of cider into a 5 gallon corny keg and your cider is not yet carbonated, Say your temperature is 40°F in the kegerator, now you want 2.3 volumes of CO2
GO!
__________________
Carboy1: Hopped Cider
Carboy2: Pear
Carboy3: Seasonal Cider
Bottled: Cream Soda
Still On Deck: Graff Cider
BadgerBrigade is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Kegging Cider dlnash16 Cider Forum 7 02-20-2013 10:42 PM
Kegging Cider CodyA Bottling/Kegging 3 10-09-2012 09:22 AM
Kegging cider. Bender Cider Forum 19 08-18-2011 11:39 PM
New to kegging cider - need help jamesjensen1068 Cider Forum 3 06-08-2011 03:26 PM
Champagne Cider and Kegging Cider MrFishy Cider Forum 6 06-05-2011 03:31 PM