Advertise Here
Main · BrewSpace · Recipes · Wiki · Groups · Clubs · Gallery · Reviews · Video · Blogs · Store

Memorial Day False Bottom Free ShippingFREE Shipping!!!$69.99 Brand new 2.5 Gallon Keg Pre-Order
Go Back   Home Brew Forums > Wine, Mead, Cider & Soda > Mead Forum



Reply
 
LinkBack Thread Tools Display Modes
Old 06-03-2010, 09:35 PM   #1
Junior Member
Recipes 
 
Join Date: Jun 2010
Location: Minneapolis, MN
Posts: 17
Default Melomel question

I started a strawberry melomel at the beginning of March. It was in primary for 1 month, and has been in secondary ever since... well actually racked a couple of times.

The hydrometer readings aren't dropping any more and it's nice and clear, has a great strawberry aroma. I'm not sure when I should consider bottling. From what I can tell bulk aging has its benefits, but I also want to free up the carboy.

My hesitance in bottling lies in a blueberry melomel I made using the same general process/recipe. I bottled it and it was tasting fantastic. Nice and clear, hydrometer readings were no longer dropping. But a few weeks later it burst all over my kitchen. And the bottles that didn't burst were ridiculously carbonated... even more than champagne.

This new batch seems to have a lot of C02 in it. If I shake the carboy it bubbles and foams. Not sure what to do from here... just wait? degas?

Any thoughts?


ZuiQuan is offline Reply With Quote
Old 06-03-2010, 10:16 PM   #2
Senior Member
Recipes 
 
Join Date: Jan 2010
Location: Florida
Posts: 1,034
Default

Well for one, give us more details. What was your starting gravity and your final gravity, and which yeast did you use. You do need to let it de-gas. Usually a gassy batch will still have a lot of particles to drop out of suspension. That will usually leave it clear enough to read newspaper through. If you've been keeping it cool, letting it sit a room temp will speed the degassing, and may encourage the yeast to chew up anything else that they ultimately will.
__________________
"Our results are merely the result of carefully managing the transformation of bee spit into yeast excrement."
--- Wayneb
MedsenFey is offline Reply With Quote
Old 06-03-2010, 11:12 PM   #3
Junior Member
Recipes 
 
Join Date: Jun 2010
Location: Minneapolis, MN
Posts: 17
Default

Quote:
Originally Posted by MedsenFey View Post
Well for one, give us more details. What was your starting gravity and your final gravity, and which yeast did you use. You do need to let it de-gas. Usually a gassy batch will still have a lot of particles to drop out of suspension. That will usually leave it clear enough to read newspaper through. If you've been keeping it cool, letting it sit a room temp will speed the degassing, and may encourage the yeast to chew up anything else that they ultimately will.
My starting gravity was 1.19 and final gravity is 1.01. It is clear enough to read newspaper through and isn't dropping any more lees.

I've been keeping it at room temp which has varied from 68-85. I know that's a big range... don't have AC. It just seems to have a lot of bubbles.

I used Red Star Cotes de Blanc champagne yeast, which if I'm not mistaken, can take a while to finish up?
ZuiQuan is offline Reply With Quote
Old 06-04-2010, 01:24 AM   #4
Senior Member
Recipes 
 
Join Date: Jan 2010
Location: Florida
Posts: 1,034
Default

Did you mean 1.119 for the starting grav? I don't think Cote des Blanc would be able to get started at 1.190. It is always good to use 3 decimals for gravity to prevent confusion.

If you have gone from 1.119 to 1.010, then the yeast is very close to its alcohol tolerance and the chance of it fermenting more is low, but I would age it under airlock until fully degassed and check the gravity again in a couple of months just to be certain it is finished. If the gravity remains stable, and it is clear and de-gassed, then it's time for bottling.
__________________
"Our results are merely the result of carefully managing the transformation of bee spit into yeast excrement."
--- Wayneb
MedsenFey is offline Reply With Quote
Old 06-04-2010, 02:34 AM   #5
Junior Member
Recipes 
 
Join Date: Jun 2010
Location: Minneapolis, MN
Posts: 17
Default

Yeah I meant from 1.119 to 1.010. Sorry, I'm kind of new at this. Thanks for the input, sounds like I just need to give it more time before bottling... I don't want any more exploding mead


ZuiQuan is offline Reply With Quote
Reply
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Blackberry melomel: Story and question on clearing... mindghost Mead Forum 5 05-28-2010 08:52 AM
Loquat Melomel petes Mead Forum 2 10-24-2008 06:37 AM
Possibly stupid question - How do you pronounce melomel? Reddy Mead Forum 17 09-25-2008 12:58 AM
Melomel Q Cheesefood Mead Forum 8 05-24-2007 06:59 AM
Melomel chips7297 Mead Forum 1 07-19-2006 11:18 PM





Contact Us - Top - Privacy - All times are GMT. The time now is 02:35 PM.
Copyright © Group Builder, Inc - All Rights Reserved
Craft Beer & Brewery Forum