Last week to Enter the Spike Brewing 20 Gallon Sight Glass Kettle Giveaway!



Home Brew Forums > Home Brewing Beer > DIY Projects > Fermenters > temp controller issue/question
Reply
 
LinkBack Thread Tools
Old 02-16-2013, 01:03 AM   #1
Ghost_Fish
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2012
Location: Portland, OR
Posts: 24
Liked 1 Times on 1 Posts
Likes Given: 2

Default temp controller issue/question

So I just built myself a fermentation chamber and used the aquarium temp controller STC-1000 that many others have used and seen here
http://www.homebrewtalk.com/f51/ebay...-build-163849/

anyway it seems to be working to a point but I'm not sure if I wired it wrong or just don't understand the operating procedure.

I only have a heat source at this point (light bulb), there is no cold yet and nothing plugged into the cold outlet. It works and heats up the chamber to the specified temp but then the controller switches from heat to cool function and keeps the heat source turned on, heating the chamber past the desired temp.

Any ideas? I just started a batch of cider and need to get this dialed pronto.

thanks

__________________
Ghost_Fish is offline
 
Reply With Quote Quick reply to this message
Old 02-16-2013, 04:04 AM   #2
raouliii
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
raouliii's Avatar
Recipes 
 
Join Date: Aug 2011
Location: Ponchatoula, LA
Posts: 854
Liked 74 Times on 66 Posts
Likes Given: 123

Default

If you used only one duplex receptacle, did you break off the tab between the two hot screws?

__________________
On Tap:
Second Amendment Amber
Rearranger IPA
Big Breasted Blonde
NippleRub Ultra

In the Chamber:
Empty

Next Up:
Ponchy Pale Ale - Falconer's Flight
raouliii is offline
 
Reply With Quote Quick reply to this message
Old 02-16-2013, 04:34 AM   #3
Ghost_Fish
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2012
Location: Portland, OR
Posts: 24
Liked 1 Times on 1 Posts
Likes Given: 2

Default

hmmm I'm not sure where the tab is so that is probably my issue, only used one duplex. where is the tab exactly?

the other part of the problem is that F2 function was set at the default .5 deg c. The light would shut off at the target temp but the temp inside the ferm box would rise past .5, once it went past the .5 it would switch to cool function and turn the light back on.

__________________
Ghost_Fish is offline
 
Reply With Quote Quick reply to this message
Old 02-16-2013, 04:43 AM   #4
raouliii
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
raouliii's Avatar
Recipes 
 
Join Date: Aug 2011
Location: Ponchatoula, LA
Posts: 854
Liked 74 Times on 66 Posts
Likes Given: 123

Default

On the side of the receptacle, in between the two brass screws, there is a small piece of metal that connects the plates that the two screws are screwed into. This tab needs to be broken off with pliers in order to isolate the two receptacles. Bend it back and forth a few times and it will break off. These two screws should be where the cooling hot and heating hot connections are made correct?

You will need to determine how much cooling undershoot and heating overshoot occurs in your fermentation setup and set the controller differential above the larger of the two. You can get the undershoot and overshoot to their minimum by attaching the probe, under insulation, to the fermentation carboy or bucket. The thermal mass of the fermenting beer helps mitigate this issue.

__________________
On Tap:
Second Amendment Amber
Rearranger IPA
Big Breasted Blonde
NippleRub Ultra

In the Chamber:
Empty

Next Up:
Ponchy Pale Ale - Falconer's Flight
raouliii is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Temp controller issue, honeywell biggubba Brew Stands 0 01-12-2013 12:39 AM
MLT Temp issue / Low FG question newdamage1 Beginners Beer Brewing Forum 10 11-30-2011 02:02 AM
Temp controller issue kennywd Fermenters 9 08-28-2011 05:31 PM
Current issue and question in Building a temp controller for my freezer/ferm chamber flananuts Kegerators and Keezers 10 08-16-2010 06:25 PM
Temp Controller Question... I_B_Mongo Fermenters 21 11-13-2009 05:23 PM



Newest Threads

LATEST SPONSOR DEALS