Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Fermenters (http://www.homebrewtalk.com/f258/)
-   -   EBay fish tank controller build using Wal-mart parts (http://www.homebrewtalk.com/f258/ebay-fish-tank-controller-build-using-wal-mart-parts-261506/)

BraxtonBrewery 02-01-2012 02:56 PM

1 Attachment(s)

Can anyone reassure me that I purcahsed the correct Temp controller, Im having some issues.


tulsabrewdaddy 02-02-2012 01:05 AM

1 Attachment(s)
Attachment 46058

Just got it all figured out! Thanks for the guidance of my first electrical build. Should be able to complete the next one in about 15 minutes start to finish.

jeepinjeepin 02-02-2012 01:37 AM

2 Attachment(s)

I got mine together too. Didn't build a box though. I wired to cooling circuit directly into the fridge in place of the thermostat. The only thing left is to find a heater and a permanent home on the outside of the fridge for the controller. Waiting for her to come up to 13C.


jeepinjeepin 02-02-2012 01:37 AM

2 Attachment(s)

I got mine together too. Didn't build a box though. I wired to cooling circuit directly into the fridge in place of the thermostat. The only thing left is to find a heater and a permanent home on the outside of the fridge for the controller. Waiting for her to come up to 13C.


jeepinjeepin 06-04-2012 02:15 AM

1 Attachment(s)

I am still debating placement but I currently have my sensor in a section of cornie diptube with an alumalloy plug melted in the bottom of it to give it some thermal mass.


DBush20 07-14-2012 01:42 PM

1 Attachment(s)

Here is my build, its the willhi one stage controller.

Attachment 68206


jerryk 08-13-2012 09:55 PM

2 Attachment(s)

I just finished mine with a few mods.

Attachment 71773



Attachment 71774


jerryk 08-13-2012 09:55 PM

2 Attachment(s)

I just finished mine with a few mods.

Attachment 71773



Attachment 71774


Snicks 08-23-2012 11:48 PM

1 Attachment(s)

I mentioned about a page or so back how the Ebay seller I was dealing with sent me a 220V STC-1000 instead of the 120V. Well I finally got my replacement in the mail.... a Paint Zoom...?


Sigh.


backdeckbrewing 09-01-2012 12:15 AM

1 Attachment(s)

Just finished, thanks!

Attachment 74041



All times are GMT. The time now is 07:47 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.