Happy HolidaySs Giveaway - Winners Re-Re-Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > DIY Projects > Fermenters > calibrating stc 1000
Reply
 
LinkBack Thread Tools
Old 08-10-2012, 12:20 AM   #1
sorefingers23
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2010
Location: montreal
Posts: 260
Liked 1 Times on 1 Posts

Default calibrating stc 1000

i just finished my fermentation chamber, and would like to know how to calibrate my stc 1000, and also what are the recomended settings for the F1,F2,F3,F4 options?

__________________
sorefingers23 is offline
 
Reply With Quote Quick reply to this message
Old 08-10-2012, 04:59 AM   #2
krazydave
Feedback Score: 1 reviews
Recipes 
 
Join Date: Aug 2010
Location: Santa Clarita, California
Posts: 880
Liked 24 Times on 22 Posts
Likes Given: 3

Default

F1 is your set temp, you want that at whatever you plan on fermenting at.
If you have a good trusted thermometer, use that to set your calibration temp if you feel it's off. Mine was pretty much dead on.
I can't remember which is which, but I set the compressor delay for around 5 min, and the temp variance at 0.3. The variance can change depending on how stable your temps are though, so your best bet is to mess with it and see what works for you.

__________________
krazydave is online now
 
Reply With Quote Quick reply to this message
Old 08-10-2012, 05:08 AM   #3
helibrewer
HBT_SUPPORTER.png
Feedback Score: 1 reviews
 
helibrewer's Avatar
Recipes 
 
Join Date: Nov 2011
Location: Santa Rosa, CA
Posts: 3,561
Liked 260 Times on 226 Posts
Likes Given: 70

Default

I am in the process of using a D18S20 digital sensor on my Arduino unit to calibrate my STC-1000 F4 setting. On the unit I have now it is set to -0.5 in the 30C range. I plan on checking at 0C and 100C so I can change the F4 value (if it differs) based on where I want my accuracy (mashing or fermenting).

__________________
Something is always fermenting....
"It's Bahl Hornin'"

Primary:
Brite Tank/Lagering:
Kegged: Sour Saison, Pale Ale, Aggie Ale
Bottled: Belgian Quad (Grand Reserve), Derangement (Belgian Dark Strong)
On Deck: Firestone DBA, De Koninck Blonde
My Site: www.restlesscellars.com
helibrewer is offline
 
Reply With Quote Quick reply to this message
Old 08-10-2012, 09:24 AM   #4
TheE
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: Israel
Posts: 6
Default

F1 is the temperature that you want.
F2 is the range.For example 0.5 means +-0.5 degrees. Lets say you set it at 50 degrees. It will go between 49.5 to 50.5
F3 is the delay. Longer lag time is better for the compressor on your fridge.
F4 is a temperature calibration value
To calibrate: Hold down the s key for 3 min. Pick which F you want to change by pressing up and down. Press the s key again to show the parameter.To change a parameter just hold down the s key and press up or down until you get to your desired range. To save your parameters just press the power key.
Good luck.

__________________
TheE is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
no output from STC-1000 twd000 Fermenters 20 06-16-2014 09:13 PM
Stc-1000 wiring bytor2012 Fermenters 223 04-24-2014 02:39 PM
Probes for STC-1000 helibrewer Fermenters 9 06-28-2012 02:10 PM
SCT-1000 relay question ImperialStout Fermenters 1 02-22-2012 09:53 PM
Stc 1000 . . . . ? Esmitee Fermenters 12 02-02-2012 12:31 AM



Newest Threads

LATEST SPONSOR DEALS