Last days to enter the BrewHardware Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns, & Hot Liquor Tanks > Cutting a perforated stainless steel false bottom?
Reply
 
LinkBack Thread Tools
Old 07-23-2009, 10:29 PM   #1
stoutaholic
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Janesville, Wisconsin
Posts: 129
Liked 1 Times on 1 Posts

Default Cutting a perforated stainless steel false bottom?

I have a 17 5/8" polarware false bottom that I need to fit into a 16" pot. Anyone know what type of tool I could use to cut it down to size?

__________________
stoutaholic is offline
 
Reply With Quote Quick reply to this message
Old 07-24-2009, 12:00 AM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 3 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,364
Liked 1112 Times on 738 Posts
Likes Given: 28

Default

An angle grinder with a cutoff wheel or a dremel with cutoff discs.

__________________
BrewHardware.com has a new website. Please check it out and let me know what you think!
New 100% Stainless Steel Heating Elements are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc. Did you know we are also now a full service homebrew shop selling malt, hops, yeast (Wyeast), etc?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 07-24-2009, 01:28 AM   #3
Duckfoot
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2008
Location: Dürty Soüth, GA
Posts: 1,375
Liked 5 Times on 5 Posts

Default

Plasma cutter....

__________________

On deck : DFB Triple Black Death By Chocolate Stout
Primary: Notta...
Secondary: 21 Year Mead...
Kegged : DFB Belgian Pale, DFB Brown, DFB Belgian Dark Strong, DFB Cider...
------------------------------------------------------

Quote:
Originally Posted by Timberwolf View Post
Non-Alcoholic beer is like going down on your cousin, it might taste the same but it just ain’t right!
Duckfoot is offline
 
Reply With Quote Quick reply to this message
Old 07-24-2009, 01:50 AM   #4
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 3 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,364
Liked 1112 Times on 738 Posts
Likes Given: 28

Default

Yeah, just go down to harbor freight and pickup a plasma cutter on the discount rack

__________________
BrewHardware.com has a new website. Please check it out and let me know what you think!
New 100% Stainless Steel Heating Elements are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc. Did you know we are also now a full service homebrew shop selling malt, hops, yeast (Wyeast), etc?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 07-24-2009, 01:53 AM   #5
Duckfoot
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2008
Location: Dürty Soüth, GA
Posts: 1,375
Liked 5 Times on 5 Posts

Default

Helluva lot easier than the Dremel...

__________________

On deck : DFB Triple Black Death By Chocolate Stout
Primary: Notta...
Secondary: 21 Year Mead...
Kegged : DFB Belgian Pale, DFB Brown, DFB Belgian Dark Strong, DFB Cider...
------------------------------------------------------

Quote:
Originally Posted by Timberwolf View Post
Non-Alcoholic beer is like going down on your cousin, it might taste the same but it just ain’t right!
Duckfoot is offline
 
Reply With Quote Quick reply to this message
Old 07-24-2009, 04:08 AM   #6
bad67z
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
bad67z's Avatar
Recipes 
 
Join Date: Feb 2009
Location: Columbus, Ohio
Posts: 1,888
Liked 108 Times on 76 Posts
Likes Given: 26

Default

Plasma definitely the way to go, I looked up welding shops in your area and you have one in town (Liberty Welding and Machine). I work with metal fabricators on a daily basis and you should be able to get this cut for $10 or less. Once you have it close you can do the final fitting with the dremel or a grinder. good luck.

__________________
bad67z is offline
 
Reply With Quote Quick reply to this message
Old 07-24-2009, 11:18 AM   #7
Kauai_Kahuna
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2008
Location: Hawaii
Posts: 2,276
Liked 7 Times on 7 Posts

Default

bad67z - I think I need to move to Columbus, Oh.
I don't think I could get a horrible welder to look at something for $10. Plus German Town, OU, affordable housing. Take this very nicely but YOU SUCK.

__________________

---
In Primary: Belgium Chimay clones.
In Secondary: Braggot, pale ale, end of the world white.
Conditioning: Mead, Cider, braggot, Belgium Wheat.
On Tap: Clones, Chimay Blue, Red, Porter, malted cider.
Bottles: Far, far, too many to list.

Kauai_Kahuna is offline
 
Reply With Quote Quick reply to this message
Old 07-24-2009, 02:08 PM   #8
ajwillys
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2008
Location: Holly Springs, NC
Posts: 1,318
Liked 23 Times on 21 Posts
Likes Given: 34

Default

Don't forget to only use new blades or blades that have only been used on stainless. Otherwise, metal shavings can get ground into the stainless (from previous projects) and cause it to rust. This, of course, assumes you actually do some of it yourself rather than getting it all done professionally.

__________________
ajwillys is offline
 
Reply With Quote Quick reply to this message
Old 07-24-2009, 02:45 PM   #9
bad67z
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
bad67z's Avatar
Recipes 
 
Join Date: Feb 2009
Location: Columbus, Ohio
Posts: 1,888
Liked 108 Times on 76 Posts
Likes Given: 26

Default

Kahuna- sorry you have to pay such a for living in paradise we ALL feel your pain.

But it should take no longer than 3 minutes to cut this false bottom down even less if the required diameter is marked before he takes it in. Don't let your horrible welders BS you, if you figure 5 minutes @ $10 = $60/hr. I'm a salesmen for a welding equipment and filler metal manufacturer and started my carer over 15 years ago as a fabricator. Just trying to share my experience.


Quick Ohio geography course Germantown is south of Dayton German Village (Brewery District) is in South Columbus. OU (Ohio University) is in Athens, OSU (The Ohio State University) is in Columbus. As for the real estate it would be a perfect time to buy the market just took a 2O% hit.

And no offense taken Kahuna, as I mentioned I'm in industrial sales, I'm Irish and live in the mid-west. Need I say more.



Cheers

__________________

bad67z is offline
 
Reply With Quote Quick reply to this message
Old 07-24-2009, 03:00 PM   #10
JKoravos
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Chelmsford, MA
Posts: 964
Liked 18 Times on 14 Posts
Likes Given: 3

Default

A vertical bandsaw could do the job as well. Not that either a vertical bandsaw or plasma cutter are easy to come by.

Dremel will defintiely work, it'll just take a while.

__________________
JKoravos is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Does a false bottom have to be stainless? R2-D2 Equipment/Sanitation 1 11-06-2009 12:41 AM
Perforated Stainless Steel Tubing bnscherm Kettles, Mash Tuns, & Hot Liquor Tanks 8 07-09-2009 06:33 PM
Slotted Stainless vs. Perforated Stainless False Bottem wtwerner All Grain & Partial Mash Brewing 3 02-05-2009 06:51 PM
Stainless Steel False Bottom Monsterc All Grain & Partial Mash Brewing 8 10-27-2008 03:44 AM
Copper Perforated False Bottom? Anthony_Lopez Equipment/Sanitation 13 04-25-2008 01:08 PM



Newest Threads

LATEST SPONSOR DEALS