Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Kettles, Mash Tuns, & Hot Liquor Tanks (http://www.homebrewtalk.com/f257/)
-   -   52 Qt Coleman Xtreme Mash Tun Build (http://www.homebrewtalk.com/f257/52-qt-coleman-xtreme-mash-tun-build-194395/)

Schnitzengiggle 02-03-2012 07:09 AM

1 Attachment(s)

I have the exact same cooler as the OP. My ball valve is connected via a short nipple, and on the inside of the MLT, I have a 1/2" SS coupler that I simply put the braid over, and secure with a SS clamp.

So, ball valve > nipple > coupler > braid (slips over the coupler) w/clamp. Of course there are washers and o-rings between, but you get the gist of it.

Attachment 46327

All times are GMT. The time now is 12:32 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.