Happy HolidaySs Giveaway - Last Sponsor Giveaway of the Year!

Come Enter the BrewDeals/FastFerment Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Other > Unveiling my brewery & garage build
Reply
 
LinkBack Thread Tools
Old 09-20-2012, 09:50 PM   #81
JonW
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
JonW's Avatar
Recipes 
 
Join Date: Dec 2009
Location: Huntington Beach ☼
Posts: 1,485
Liked 102 Times on 63 Posts
Likes Given: 40

Default

I don't see where you'd need to put spacers in there. I'd just put a layer of backer board over the existing sheetrock and put the SS back on top of that. You could then either get an SS edging or just fill the edge of the backer board with plaster and paint the elevated edge. It looks like your hood already has an inside lip on the back wall, so that would just bring the back SS panel out even or close to the hood edge.

__________________
Surf City Brewing (TM)

My Single Tier, 3 Pump, BCS-462, Brutus Build: http://www.homebrewtalk.com/f51/sing...ed-rig-204705/
My customized BCS-462 controller web interface: http://www.homebrewtalk.com/f51/hack...s-done-209388/
My 8 tap, 11 keg, upright Keezer build: http://www.homebrewtalk.com/f51/upri...1-kegs-371438/
JonW is offline
 
Reply With Quote Quick reply to this message
Old 09-20-2012, 10:20 PM   #82
MuddyCreek
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
MuddyCreek's Avatar
Recipes 
 
Join Date: Aug 2012
Location: Butte, MT
Posts: 551
Liked 166 Times on 102 Posts
Likes Given: 110

Default

Amazing setup. Really impressive.

__________________
MuddyCreek is offline
 
Reply With Quote Quick reply to this message
Old 09-20-2012, 10:44 PM   #83
fall-line
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
fall-line's Avatar
Recipes 
 
Join Date: Mar 2011
Location: Seattle, WA
Posts: 433
Liked 49 Times on 35 Posts
Likes Given: 14

Default

Thanks, Muddy (and others), it's rewarding to hear this feedback after all the hard work.

__________________

"Brewing beer is a fun and rewarding hobby. When you do good, you get beer. When you do bad, you get beer. It's a lot like rec league softball"
(source)


Building a home brewery (and garage) from the ground up
fall-line is offline
 
Reply With Quote Quick reply to this message
Old 09-20-2012, 10:56 PM   #84
fall-line
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
fall-line's Avatar
Recipes 
 
Join Date: Mar 2011
Location: Seattle, WA
Posts: 433
Liked 49 Times on 35 Posts
Likes Given: 14

Default

Regarding the backing board, I've seen a lot of mixed information about whether or not it needs a spacer. I believe you two are probably right that I don't really *need* the gap, but it does make sense that it should be there. I believe code requires a wood stove to have a 1" spacer between the wall and the backer board, and then a non flammable surface material.

Currently the stainless backing on the wall underlaps the hood by a few inches, but to Jon's point, I could cut the height down so it sits flush with the bottom of the hood, and bump it out a bit for the backer.

Thanks for the info guys. I'm planning to do another round of taping and mudding the drywall next week in preperation for painting, so I'll look to address this then. I'll pickup the backing board and do a hand heat test with it next to the burner after a while to answer the gap/no gap question.

__________________

"Brewing beer is a fun and rewarding hobby. When you do good, you get beer. When you do bad, you get beer. It's a lot like rec league softball"
(source)


Building a home brewery (and garage) from the ground up
fall-line is offline
 
Reply With Quote Quick reply to this message
Old 09-21-2012, 02:33 AM   #85
PleasantValleyHops
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: frederick, md
Posts: 358
Liked 22 Times on 19 Posts

Default

I see no reason to worry about redoing the drywall. I work in construction and have done a few restaurants. The one thing that would happen is double layer 5/8" drywall. Which does create a 1 hour rated wall. But that was also bc they were not standalone places so needed the break between the different stores. But this stainless would be applied straight to the drywall!! I know y risk it is a big deal. But also radiant heat has to be through the roof to penetrate the stainless and drywall to combust the wood framing behind it. And u said u used type x. Id say dont sweat it and enjoy u sweet setup!! Planning my next house build i def have a brewery in thought as a built in!!!

Cheers!

__________________
Carroll Brewing CompanyFrederick, Md.
PleasantValleyHops is offline
 
Reply With Quote Quick reply to this message
Old 09-21-2012, 04:45 AM   #86
earlchagnon
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Location: Chicopee, MA
Posts: 1
Default

Wow! That about sums it up!

__________________
earlchagnon is offline
 
Reply With Quote Quick reply to this message
Old 09-21-2012, 04:37 PM   #87
fall-line
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
fall-line's Avatar
Recipes 
 
Join Date: Mar 2011
Location: Seattle, WA
Posts: 433
Liked 49 Times on 35 Posts
Likes Given: 14

Default

dcarroll86, I'll admit you are telling me what I want to hear. You are probably right, but I can't help but consider the risks. The wall here is a 1hr rated firewall (per code as it is 3ft from our property line) with two layers of type X, but only one of those layers is on the inside. If I recall my wall from the inside out is: 26gauge Stainless Steel, 5/8" TypeX, Studs and R21 insulation, 5/8" TypeX, plywood, and then siding.

My concern is the impact the heat will have on the in-wall materials, which include quite a bit of plumbing and electrical right there. I'm leaning towards slapping some backing board up there as JonW suggested. I figure for a couple of hours work, I may save myself years of uncertainty. My contractor will be coming by for a visit tomorrow though, so I'll fire up the burners for a bit and get his opinion on things.

Thanks again for all your thoughts! I should have started this thread and been picking your brains earlier.

__________________

"Brewing beer is a fun and rewarding hobby. When you do good, you get beer. When you do bad, you get beer. It's a lot like rec league softball"
(source)


Building a home brewery (and garage) from the ground up
fall-line is offline
 
Reply With Quote Quick reply to this message
Old 09-21-2012, 05:30 PM   #88
Im_Lars
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Im_Lars's Avatar
Recipes 
 
Join Date: Oct 2010
Location: Sunny Puget Sound
Posts: 197
Liked 21 Times on 16 Posts
Likes Given: 7

Default

I helped a friend build a small cabin and behind the wood stove we put hardy backer and a sheet of stainless. The next day the wood stove was cookin and we had to pull some siding off to repair a pluming leak for the outside faucet. The back side of the sheetrock was maybe ten degrees warmed that sheetrock down the wall away from the wood stove and the stainless behind the stove was so hot you couldn't keep your hand on it. If you added backer under the stainless you are going to be more than good to go

__________________
Im_Lars is offline
fall-line Likes This 
Reply With Quote Quick reply to this message
Old 09-21-2012, 06:15 PM   #89
fall-line
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
fall-line's Avatar
Recipes 
 
Join Date: Mar 2011
Location: Seattle, WA
Posts: 433
Liked 49 Times on 35 Posts
Likes Given: 14

Default

Thanks, earlchagnon, and welcome to the forums!

__________________

"Brewing beer is a fun and rewarding hobby. When you do good, you get beer. When you do bad, you get beer. It's a lot like rec league softball"
(source)


Building a home brewery (and garage) from the ground up
fall-line is offline
 
Reply With Quote Quick reply to this message
Old 09-21-2012, 09:22 PM   #90
sweetcell
Swollen Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
sweetcell's Avatar
Recipes 
 
Join Date: Jan 2012
Location: Rockville, MD
Posts: 4,226
Liked 711 Times on 523 Posts
Likes Given: 273

Default

i'm not jealous. i'm not angry. i'm... i don't know what i am. what is beyond awe? yeah, that's what i'm feeling.

beyond sweet. amazing work. wow!

__________________
.
What hops should I grow? Hop grower's comparison table. Looking for cheap honey?

Drinking: a farmhouse with ECY08 & brett blend, wet-hopped harvest ale x 2, second runnings dark ale with vanilla
Fermenting: (nothing active)
Aging: imperial chocolate stout, sour cherry mead, oud bruin & a few other sours, acerglyn, a BDSA
sweetcell is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Roxton Garage/Brewery build RoxtonBrewing Brew Stands 124 11-14-2014 03:24 PM
New Garage and the Phoenix Brewery Warrior DIY Projects 129 05-13-2012 09:25 PM
KCBrewer's Garage Brewery KCBrewer Brew Stands 72 04-27-2011 12:01 AM
Garage brewery build sjvicker Brew Stands 15 08-26-2010 03:35 AM
Garage home brewery blackheart Brew Stands 133 07-29-2010 06:50 PM



Newest Threads

LATEST SPONSOR DEALS