Last days to enter the BrewHardware Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Other > Question on SS Nipple for connecting two water filters
Reply
 
LinkBack Thread Tools
Old 11-13-2012, 11:29 PM   #1
Spydre
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Boston, MA
Posts: 24
Default Question on SS Nipple for connecting two water filters

I'm running two water filters in series connected with a 1" x 1/2" stainless steel NPT nipple I bought from Brooklyn Homebrew HERE. The only issue is that the nipple is a little too short, so it leaks a bit. I was looking around for a longer one (2" maybe?) and came up with THIS, but wanted to make sure this looked good, since I'm terrible with metallurgy and picking out fittings over the internet. Sorry if this seems like a dumb question!

__________________
Spydre is offline
 
Reply With Quote Quick reply to this message
Old 11-14-2012, 12:31 AM   #2
Hmmessman
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Posts: 27
Liked 2 Times on 2 Posts
Likes Given: 1

Default

If the filters are not touching a longer nipple will not help. Try to remove the side that is leaking and put a couple more rounds of Teflon tape on it. Pipe dope also does a good job.

__________________
Hmmessman is offline
 
Reply With Quote Quick reply to this message
Old 11-14-2012, 12:38 AM   #3
mux
Feedback Score: 3 reviews
Recipes 
 
Join Date: Sep 2011
Location: Chicago, IL - Illinois
Posts: 1,878
Liked 67 Times on 55 Posts
Likes Given: 23

Default

Just use a galvanized nipple from the depot. cheap! Or use copper and and male adapters.

__________________
mux is offline
 
Reply With Quote Quick reply to this message
Old 11-14-2012, 04:36 PM   #4
Spydre
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Boston, MA
Posts: 24
Default

Quote:
Originally Posted by Hmmessman View Post
If the filters are not touching a longer nipple will not help. Try to remove the side that is leaking and put a couple more rounds of Teflon tape on it. Pipe dope also does a good job.
I tried using Teflon tape, but the problem is that they're touching, so the nipple doesn't go all the way into either of the water filters, since it's not long enough.
__________________
Spydre is offline
 
Reply With Quote Quick reply to this message
Old 11-14-2012, 06:56 PM   #5
Hmmessman
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Posts: 27
Liked 2 Times on 2 Posts
Likes Given: 1

Default

Well in that case, if you have already purchased the second fitting above, it will work. If not what mux said will work just as well for less and plastic is also a suitable option.

__________________
Hmmessman is offline
 
Reply With Quote Quick reply to this message
Old 11-14-2012, 09:25 PM   #6
Spydre
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Boston, MA
Posts: 24
Default

Sounds good. Thanks for the help! I always thought avoiding galvanized steel in brewing was preferable, but maybe I was wrong.

__________________
Spydre is offline
 
Reply With Quote Quick reply to this message
Old 11-14-2012, 09:38 PM   #7
mux
Feedback Score: 3 reviews
Recipes 
 
Join Date: Sep 2011
Location: Chicago, IL - Illinois
Posts: 1,878
Liked 67 Times on 55 Posts
Likes Given: 23

Default

Quote:
Originally Posted by Spydre
Sounds good. Thanks for the help! I always thought avoiding galvanized steel in brewing was preferable, but maybe I was wrong.
Your application is for cold water. You could use pex too but it would be more expensive.
__________________
mux is offline
 
Reply With Quote Quick reply to this message
Old 11-14-2012, 10:19 PM   #8
JonathanS
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Tucson, AZ
Posts: 56
Liked 2 Times on 2 Posts
Likes Given: 3

Default

I would avoid using a plastic nipple unless your duel filters are permanently mounted. I have already broken one of the plastic nipples and switched to brass.

__________________
JonathanS is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Water question - reports and filters najel Brew Science 3 10-15-2012 08:27 PM
Water filters jessebaseball Soda Making 3 10-06-2012 03:59 PM
Water testing question re: filters SankePankey General Techniques 5 02-22-2010 04:15 PM
Anyone Use Really Big water filters? virus692 Equipment/Sanitation 12 03-27-2009 03:51 PM



Newest Threads

LATEST SPONSOR DEALS