Home Brew Forums > Home Brewing Beer > DIY Projects > Other > Motorized Grain Mills: Time to show them off!
Reply
 
LinkBack Thread Tools
Old 09-08-2011, 08:24 PM   #81
Dgonza9
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2010
Location: Evanston, Illinois
Posts: 1,183
Liked 10 Times on 10 Posts

Default

Quote:
Originally Posted by Lilrascal View Post
It is a MM3 with 1.5 inch rollers, not the 2 inch rollers, and the 177rpm 40lb gear motor from surplus center. I had no problem starting it, then dumping in 20lbs grain. Maybe it depends on how tight the crush setting is set?
Is there any way you can post your wiring diagram? I'm wondering if somehow I wired it incorrectly, creating less torque?

Mine operates fine in forward and reverse, but as I said, it jammed very easily.

I was using some very old grain, but I doubt that should matter.
__________________
On Tap: Belgian Barrel Aged Barleywine, Da Yooper's Oatmeal Stout, Breakfast Stout, Hop Your Face Off IIPA, Catcher in the Rye Saison, "Wino-head" Nelsin Sauvin Gumballhead.

Bourbon Barrel Duchesse De Bourgnone
Kegged:

Fermenting English Mild

on Deck: Lager?
Dgonza9 is offline
 
Reply With Quote Quick reply to this message
Old 09-08-2011, 10:17 PM   #82
StMarcos
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2008
Location: Sebastopol, CA
Posts: 956
Liked 29 Times on 24 Posts
Likes Given: 1

Default

Used a belt/sheave with the 3d for years, but I like my current setup more:

mill.jpg  
__________________
StMarcos is offline
 
Reply With Quote Quick reply to this message
Old 09-09-2011, 02:04 AM   #83
Duckfoot
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2008
Location: Dürty Soüth, GA
Posts: 1,375
Liked 5 Times on 5 Posts

Default


__________________

On deck : DFB Triple Black Death By Chocolate Stout
Primary: Notta...
Secondary: 21 Year Mead...
Kegged : DFB Belgian Pale, DFB Brown, DFB Belgian Dark Strong, DFB Cider...
------------------------------------------------------

Quote:
Originally Posted by Timberwolf View Post
Non-Alcoholic beer is like going down on your cousin, it might taste the same but it just ain’t right!
Duckfoot is offline
 
Reply With Quote Quick reply to this message
Old 09-12-2011, 03:54 PM   #84
Lilrascal
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Lilrascal's Avatar
Recipes 
 
Join Date: Apr 2010
Location: Wisconsin
Posts: 264
Liked 7 Times on 7 Posts
Likes Given: 1

Default

Quote:
Originally Posted by Dgonza9 View Post
Is there any way you can post your wiring diagram? I'm wondering if somehow I wired it incorrectly, creating less torque?

Mine operates fine in forward and reverse, but as I said, it jammed very easily.

I was using some very old grain, but I doubt that should matter.
This is the diagram I used: http://www.homebrewtalk.com/f51/capa...ml#post2784126
__________________
Dinky Dog Brewing
My Keezer Build
Lilrascal is offline
 
Reply With Quote Quick reply to this message
Old 09-18-2011, 10:21 PM   #85
Dgonza9
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2010
Location: Evanston, Illinois
Posts: 1,183
Liked 10 Times on 10 Posts

Default My Mill is up and running!

I upgraded my motor to a bodine gear motor with 120 in/lbs of torque. Cost more, about $150 on ebay. Was brand new, though. But it works fantastic. Easily started up with 20lbs in the hopper already. Milled 32 lbs of grain for today's brew day.

I'm glad the 40 in/lb motor worked for you. But I'd caution others to try that motor with a 3 roller mill anyway. My only problem was torque. I had mine wired the same as yours, so who knows what the difference was. Maybe the capacitor on mine wasn't working properly. Anyway, here's a pic of my new mill setup.

__________________
On Tap: Belgian Barrel Aged Barleywine, Da Yooper's Oatmeal Stout, Breakfast Stout, Hop Your Face Off IIPA, Catcher in the Rye Saison, "Wino-head" Nelsin Sauvin Gumballhead.

Bourbon Barrel Duchesse De Bourgnone
Kegged:

Fermenting English Mild

on Deck: Lager?
Dgonza9 is offline
 
Reply With Quote Quick reply to this message
Old 09-18-2011, 11:53 PM   #86
ultra_
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Christchurch, new zealand
Posts: 10
Default

Hey guys?
did anyone make there rollers? could i make some from hard wood on a lathe and use some oil? or would there be problems with that
Also are the drill driven ones enough??
Thanks guys

__________________
ultra_ is offline
 
Reply With Quote Quick reply to this message
Old 09-19-2011, 12:36 AM   #87
rico567
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
rico567's Avatar
Recipes 
 
Join Date: Apr 2008
Location: Central IL
Posts: 3,018
Liked 84 Times on 79 Posts
Likes Given: 21

Default

I think you'll find there was a reason why grain used to be ground by mill "stones" and not mill "logs." That stuff is going to be so abrasive that it will erode the hardest wood in short order.

__________________

“Malt does more than Milton can / To justify God’s ways to man”

-A. E. Housman (1859–1936). A Shropshire Lad , 1896.

rico567 is offline
 
Reply With Quote Quick reply to this message
Old 09-19-2011, 08:09 AM   #88
ultra_
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Christchurch, new zealand
Posts: 10
Default

good point
what about using 2 marble rolling pins?
could make a cheap mill

__________________
ultra_ is offline
 
Reply With Quote Quick reply to this message
Old 09-19-2011, 01:11 PM   #89
pola0502ds
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Posts: 832
Liked 2 Times on 2 Posts

Default

Here is a picture of my mill.

Take a look a the picture, I have a lot of you have the same motor and I have a question.

Have you add any problems with the motor jambing because you have to much grain in the hopper. I do all the time. I wonder if I need to close up the exit portion of the hopper to limit how much grain hits the rollers at once.

91911-008.jpg  
__________________
pola0502ds is offline
 
Reply With Quote Quick reply to this message
Old 09-19-2011, 02:18 PM   #90
P-J
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Charlotte, NC
Posts: 3,304
Liked 271 Times on 217 Posts
Likes Given: 470

Default

Quote:
Originally Posted by pola0502ds View Post
Here is a picture of my mill.

Take a look a the picture, I have a lot of you have the same motor and I have a question.

Have you add any problems with the motor jambing because you have to much grain in the hopper. I do all the time. I wonder if I need to close up the exit portion of the hopper to limit how much grain hits the rollers at once.
Which direction are you running the motor when milling CCW or CW?

Reason I'm asking is the Gear Motor 5-1098 is designed to run CCW (viewed from the wiring end). If run CW it has far less torque available.

And another thought. If you got this Gear Motor 5-1074 it has far less torque available in either direction as well as a much lower speed.

P-J
__________________
P-J is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Grain mills commandercool724 All Grain & Partial Mash Brewing 20 01-22-2010 04:05 PM
Grain Mills jasonsbeer Equipment/Sanitation 14 09-13-2009 09:04 PM
Grain Mills Sonnyjim Equipment/Sanitation 5 09-07-2009 12:57 PM
Grain Mills ontap@home Equipment/Sanitation 8 05-18-2007 02:17 PM
Grain Mills davidkrau Equipment/Sanitation 15 04-12-2006 01:22 AM



Newest Threads

LATEST SPONSOR DEALS