Happy HolidaySs Giveaway - Last Sponsor Giveaway of the Year!

Come Enter the BrewDeals/FastFerment Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Other > Mission Style Mill Station
Reply
 
LinkBack Thread Tools
Old 11-10-2011, 02:54 AM   #1
Boggs6ft7
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Southern, Indiana
Posts: 8
Default Mission Style Mill Station

I have been working on this off and on for the past few weeks. I've had the motor since spring time, but I have been putting off this project.

My goal was a mission style table make of mortise and tenons. What I did not expect was the number of bar clamps I would need. So it is slightly... or a lot... out of square depening on how you look at it. Oh well, learn from your mistakes. It still works okay.

The switch is hidden under the front right hand side.

I may add some casters and a sock to keep dust down and direct grain to the bucket.

img_20111105_183516.jpg   img_20111109_201048.jpg   img_20111109_201102.jpg   img_20111109_201132.jpg   img_20111109_201120.jpg  

__________________
Boggs6ft7 is offline
 
Reply With Quote Quick reply to this message
Old 11-10-2011, 02:57 AM   #2
OneHoppyGuy
HBT_SUPPORTER.png
HomeBrewTalk 2012 Vendor Giveaway Participate
Feedback Score: 0 reviews
 
OneHoppyGuy's Avatar
Recipes 
 
Join Date: Nov 2009
Location: Concord, CA
Posts: 1,704
Liked 40 Times on 33 Posts
Likes Given: 52

Default

Very nice... wood and I don't get along...

__________________

Brewright. All Rights Reserved. We reserve the right to brew and to help you brew. To protect the brew and defend the brew. To make the brew and drink the brew.

BrewSteel.com
BrewSteel on Facebook

OneHoppyGuy is offline
 
Reply With Quote Quick reply to this message
Old 11-10-2011, 03:05 AM   #3
Boggs6ft7
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Southern, Indiana
Posts: 8
Default

Quote:
Originally Posted by OneHoppyGuy View Post
Very nice... wood and I don't get along...
Thanks. More than once I was wondering why I was spending time (and money) on making this out of poplar. But I'm happy with the final results.
__________________
Boggs6ft7 is offline
 
Reply With Quote Quick reply to this message
Old 11-10-2011, 03:19 AM   #4
outside92129
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
outside92129's Avatar
Recipes 
 
Join Date: Apr 2011
Location: Carlsbad, CA
Posts: 1,148
Liked 53 Times on 44 Posts
Likes Given: 23

Default

Looks great.

+1Hoppyguy: I also don't deal well with wood that isn't attached to me.

__________________
outside92129 is offline
 
Reply With Quote Quick reply to this message
Old 11-10-2011, 12:16 PM   #5
Hoppopotomus
Cedar Hollow Brewing
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Hoppopotomus's Avatar
Recipes 
 
Join Date: Nov 2010
Location: Ortonville/Oxford, Michigan
Posts: 1,448
Liked 85 Times on 74 Posts
Likes Given: 118

Default

The mill station looks fantastic! Great job on the woodworking. This is one of my projects off in the distance once I get my HERMS e-build done. What size motor did you use?

Hoppopotomus is online now
 
Reply With Quote Quick reply to this message
Old 11-10-2011, 01:50 PM   #6
Boggs6ft7
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Southern, Indiana
Posts: 8
Default

It was the 177 rpm motor from Surplus Center that a lot guys on the board have used. I don't think it is still available though.

__________________
Boggs6ft7 is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My Ugly Junk- Corona Mill Station... Revvy Other 1791 11-23-2014 06:04 PM
Fermentation chamber/mill station/work bench build Dukeman9988 Brew Stands 6 10-16-2011 01:27 AM
My new mill station Neddy Other 9 07-27-2011 06:15 PM
Motorizing Corona style mill lyacovett Other 9 10-15-2010 08:34 PM
my stir plate 1x2 station 1x3 station Opherman47 Chillers and Stir Plates 9 06-04-2010 03:55 PM



Newest Threads

LATEST SPONSOR DEALS