Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Other (http://www.homebrewtalk.com/f256/)
-   -   Mission Style Mill Station (http://www.homebrewtalk.com/f256/mission-style-mill-station-280096/)

Boggs6ft7 11-10-2011 02:54 AM

Mission Style Mill Station
 
5 Attachment(s)

I have been working on this off and on for the past few weeks. I've had the motor since spring time, but I have been putting off this project.

My goal was a mission style table make of mortise and tenons. What I did not expect was the number of bar clamps I would need. So it is slightly... or a lot... out of square depening on how you look at it. Oh well, learn from your mistakes. It still works okay.

The switch is hidden under the front right hand side.

I may add some casters and a sock to keep dust down and direct grain to the bucket.


Boggs6ft7 11-10-2011 02:54 AM

Mission Style Mill Station
 
5 Attachment(s)

I have been working on this off and on for the past few weeks. I've had the motor since spring time, but I have been putting off this project.

My goal was a mission style table make of mortise and tenons. What I did not expect was the number of bar clamps I would need. So it is slightly... or a lot... out of square depening on how you look at it. Oh well, learn from your mistakes. It still works okay.

The switch is hidden under the front right hand side.

I may add some casters and a sock to keep dust down and direct grain to the bucket.


Boggs6ft7 11-10-2011 02:54 AM

Mission Style Mill Station
 
5 Attachment(s)

I have been working on this off and on for the past few weeks. I've had the motor since spring time, but I have been putting off this project.

My goal was a mission style table make of mortise and tenons. What I did not expect was the number of bar clamps I would need. So it is slightly... or a lot... out of square depening on how you look at it. Oh well, learn from your mistakes. It still works okay.

The switch is hidden under the front right hand side.

I may add some casters and a sock to keep dust down and direct grain to the bucket.


Boggs6ft7 11-10-2011 02:54 AM

Mission Style Mill Station
 
5 Attachment(s)

I have been working on this off and on for the past few weeks. I've had the motor since spring time, but I have been putting off this project.

My goal was a mission style table make of mortise and tenons. What I did not expect was the number of bar clamps I would need. So it is slightly... or a lot... out of square depening on how you look at it. Oh well, learn from your mistakes. It still works okay.

The switch is hidden under the front right hand side.

I may add some casters and a sock to keep dust down and direct grain to the bucket.


Boggs6ft7 11-10-2011 02:54 AM

Mission Style Mill Station
 
5 Attachment(s)

I have been working on this off and on for the past few weeks. I've had the motor since spring time, but I have been putting off this project.

My goal was a mission style table make of mortise and tenons. What I did not expect was the number of bar clamps I would need. So it is slightly... or a lot... out of square depening on how you look at it. Oh well, learn from your mistakes. It still works okay.

The switch is hidden under the front right hand side.

I may add some casters and a sock to keep dust down and direct grain to the bucket.



All times are GMT. The time now is 06:05 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.