Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > DIY Projects > Other > Home Depot GE FCM7 Chest Freezer Startup Current Draw
Reply
 
LinkBack Thread Tools
Old 01-09-2012, 10:32 PM   #1
afr0byte
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Vermont
Posts: 1,433
Liked 72 Times on 61 Posts
Likes Given: 49

Default Home Depot GE FCM7 Chest Freezer Startup Current Draw

I'm hoping to use my GE FCM7 (7 cubic foot chest freezer from Home Depot) with my Ranco Dual Stage temperature controller. The tag says that it runs at 1.7 amps, but I know the startup current draw would be higher. My EE (electrical engineer) friend guesses that the start-up draw for a motor of this size will probably be about 6 or 7 amps, though it theoretically could have a draw of 15 amps on start. So, I was wondering, does anyone on the forum happen to know the startup draw of this particular model?

__________________
afr0byte is offline
 
Reply With Quote Quick reply to this message
Old 01-09-2012, 10:35 PM   #2
Brulosopher
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Fresno, CA
Posts: 2,736
Liked 219 Times on 175 Posts
Likes Given: 144

Default

I have no clue about what you're talking about... but I'm sure you'll be fine. I use a very similar freezer for fermentation. Cheers!

Brulosopher is offline
 
Reply With Quote Quick reply to this message
Old 01-09-2012, 10:36 PM   #3
Brewnoob1
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Brewnoob1's Avatar
Recipes 
 
Join Date: Sep 2011
Location: Puyallup, WA
Posts: 982
Liked 23 Times on 23 Posts
Likes Given: 8

Default

I would think it would be a lot lower than 15 amps, though I dont know because I haven't tested it. I have my GE 7cf freezer plugged into my ebay temp controller plugged in inside my house with no issues.

I think the ebay controller if I remember right is rated at somewhere close to 10amps. So it has to be under that I'd presume.

__________________

Keg #1: Empty :(
Keg #2: Empty :(
Kegs 3-5: Empty :(

Ferment #1: Empty :(
Ferment #2: Empty :(
Ferment #3: Empty :(

On Deck: Something....Anything!!!

Brewnoob1 is offline
 
Reply With Quote Quick reply to this message
Old 01-09-2012, 11:43 PM   #4
jjames
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: SOUTH JORDAN, UTAH
Posts: 2
Default

The controller I have on my keezer replaces the stock temp control which is hung from the trigger input for the motor relay. What this means is that I really dont care what the peak draw of the motor is as the stock relay will handle that. I'm not sure which control I'm using but I think its a ranco something or another. You should review what the install is - I'm fairly sure you won't run it inline with the motor.


hope that helps -
justin

__________________
jjames is offline
 
Reply With Quote Quick reply to this message
Old 01-09-2012, 11:57 PM   #5
afr0byte
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Vermont
Posts: 1,433
Liked 72 Times on 61 Posts
Likes Given: 49

Default

Quote:
Originally Posted by jjames View Post
The controller I have on my keezer replaces the stock temp control which is hung from the trigger input for the motor relay. What this means is that I really dont care what the peak draw of the motor is as the stock relay will handle that. I'm not sure which control I'm using but I think its a ranco something or another. You should review what the install is - I'm fairly sure you won't run it inline with the motor.


hope that helps -
justin
I don't know what other way I'd use it. It has a (pre-assembled from MoreBeer) plug that connects to the wall and then two outlets. One outlet is for heating, the other for cooling.
__________________
afr0byte is offline
 
Reply With Quote Quick reply to this message
Old 01-10-2012, 04:22 PM   #6
jjames
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: SOUTH JORDAN, UTAH
Posts: 2
Default

Gotcha - Just looked at it on morebeer. Let me start out with the disclaimer of - I'm not a EE or electrician. I did look for the specs for the morebeer and the fridge without any luck.
I think this is odd, anyway I would expect it will be fine - but who knows now. I hope so, the thing is costly enough that it better damn well handle a fridge, and a fleet of them at that.

I would call up morebeer and ask wtf it is rated at.

__________________
jjames is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
7cf GE Freezer On Sale @ Depot kkramer56 Kegerators and Keezers 15 11-18-2011 08:30 PM
Home depot chest freezer sale Diver165 Kegerators and Keezers 6 09-04-2011 06:43 PM
Question : Power (amp) draw of a chest freezer Toecutter Kegerators and Keezers 3 07-09-2011 11:41 PM
Home Depot Chest Freezers usafbeach Fermenters 20 05-24-2011 06:05 PM
GE 7 cu ft Freezer Power Draw SudsGuy Kegerators and Keezers 6 07-20-2010 07:58 PM



Newest Threads

LATEST SPONSOR DEALS