Come enter the BrewHardware Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Chillers and Stir Plates > Wort Chiller Connections Help
Reply
 
LinkBack Thread Tools
Old 07-19-2011, 03:59 AM   #1
hogie222
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: New York, NY
Posts: 1
Default Wort Chiller Connections Help

Hey all,
So i'm very new at the brewing game, just about to start my thrid 5 gallon batch, but i just aquired a wort chiller, however it does not have any of the connections and I dont know it's dimentions. What i do know: the standard tubing that i use for bottling and syphoning fits perfectly(if you could tell me that size that would be very helpful). I need a way to connect it to a standard sink but i have no clue what that would be.
Here are pics: http://hogietumblr.imgur.com/wort_chiller_help#3PpMV
Thanks!

__________________
hogie222 is offline
 
Reply With Quote Quick reply to this message
Old 07-19-2011, 04:10 PM   #2
CrazedArmadillo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Durham, NC
Posts: 36
Liked 1 Times on 1 Posts

Default

I can't tell by looking at it, but it's either going to be 3/8" or 1/2" copper tubing (these are outer diameter measurements). If you don't know what size your plastic tubing is, just use a ruler or tape measure to determine how wide the copper tubing is.

If you're looking to solder hose fittings on to the ends or use compression fittings, you'll need 1/4" fittings for a 3/8" OD copper coil, or 3/8" fittings for a 1/2" OD copper coil.

__________________
CrazedArmadillo is offline
 
Reply With Quote Quick reply to this message
Old 07-19-2011, 04:17 PM   #3
Golddiggie
HBT_SUPPORTER.png
Feedback Score: 1 reviews
 
Golddiggie's Avatar
Recipes 
 
Join Date: Dec 2010
Location: Between here and there, and everywhere
Posts: 12,058
Liked 480 Times on 421 Posts
Likes Given: 266

Default

Looks like 3/8" to me. Bend some goose-necks on the ends so that they are outside the kettle and and on a down slope so that they wont drip into the kettle. You can simply put some tubing on the ends, with hose clamps. Just be careful when tightening the clamps. Test the chiller a day, or more, ahead of brew day to make sure its leak free.

I used IC's for a while but I've since moved to a plate chiller. SO much better for chilling the wort fast.

__________________
Hopping Tango Brewery

跟猴子比丟屎 ・ Gun HOE-tze bee DIO-se

On Tap: Caramel Ale, Mocha Porter II, MO SMaSH IPA
Waiting/Carbonating: 12.5% Wee Honey II, 8.9% Old Ale, English Brown Ale, Lickah ESB, Mocha Porter II
Fermenting
K1:
K2: Epic mead
K3: TripSix
On Deck: Caramel Ale
Aging:mead
Mead [bottled]:Oaked Wildflower Traditional, Mocha Madness, Blackberry Melomel, maple wine
Golddiggie is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My $2.00 Wort Chiller autobaun70 Chillers and Stir Plates 28 02-24-2011 07:22 PM
wort chiller- 3/8 OD or 1/2 OD? porterguy Chillers and Stir Plates 5 12-29-2010 11:47 PM
wort chiller lincoln Chillers and Stir Plates 2 08-24-2010 02:26 AM
Co2 Wort Chiller Chilkoot Chillers and Stir Plates 26 04-02-2008 05:33 AM
help me with my wort chiller! SenorWanderer Chillers and Stir Plates 9 08-24-2007 08:31 PM



Newest Threads

LATEST SPONSOR DEALS